any chance you can tell me what the go is with that remote water pump crossover manifold thing between the water pump flanges? is that something you make?

@aeroflowperformance

11 ай бұрын

It sure is an item we make and sell. We have the adapter plates to suit the block which you can run flexible lines from or you can fit the logs to provide a clean solution Here is the logs: aeroflowperformance.com/af64-2242-coolant-cross-over-log And here are the plates for the block: aeroflowperformance.com/af64-2241-gm-ls-water-pump-plates

Nicely done video, does the passenger side tubro manifold ( for a single setup) hapen to work with the factory ls power steering pump? would rather keep the factory pump than go to an electric if I can.

@aeroflowperformance

Жыл бұрын

As it sits the power steering pump needs to be moved up (i think there are some kits out there) or convert to electric steering

@lorisk9296

6 ай бұрын

so glad you asked this question bro! thanks! hahaha

Dang this is a nice setup. Just wish there was a single turbo manifold for the passenger for us Americans...

@aeroflowperformance

Жыл бұрын

Unfortunately nothing for now - hooker has a decent one i believe. Alternatively you could use our twin kit and make up a crossover and up-pipe to a single turbo!

@dawsontupper4415

Жыл бұрын

@@aeroflowperformance dang... it's really the shape and angle of yours that I like so much... plus a very reasonable price!

@aeroflowperformance

Жыл бұрын

@@dawsontupper4415 thanks for the kind words Dawson

Will the twin forward facing fit with a factory truck water pump

@aeroflowperformance

6 ай бұрын

The flanges finish basically in line with the front of the block, so how you fabricate from there will depend on clearance.

so these 3 part numbers are the correct numbers for both manifolds and crossover pipes to suit VE/VF commadore single turbo setup? AF8200-1005 + AF8200-1010 + AF8200-1000?

@aeroflowperformance

6 ай бұрын

Yes that's correct, then if you require it we also have the twist mount adapter to mount a T4 or 40 frame V-band turbo AF8210-2000 or AF8270-2000

@lorisk9296

6 ай бұрын

yup i have with the vband to t4 twist flange@@aeroflowperformance. im already starting the intercooler pipes. but you dont happen to have a pipe kit for ve?🤣 i have the 600x300x76mm aeroflow intercooler. thank you for your brand. its made my l98 build a breeze

Do u have single turbo header in the US and if not how long does it take to get here

@aeroflowperformance

6 ай бұрын

Shipping to the US is generally within 7 working days.

@DannyR2681

7 күн бұрын

@@aeroflowperformanceyou guys now make a passenger side turbo manifold for us USA guys right? And it’s $289 plus shipping to the states?

what! no gen 3 hemi 5,7 set ups? with eagle heads ? hemi swap 1970 e body challenger.

@aeroflowperformance

Жыл бұрын

Unfortunately not at this stage...

Hi like the product, If i was to run the twin turbo manifolds facing forward and high mount is the 2.5 outlet to small if i want to make it single turbo setup, Motor is 6 litre lq9 408 stroker, on methanol.

@aeroflowperformance

Жыл бұрын

Hey Mark, we find the 2.5 per side works fine as long as once you've merged it in to a single pipe before the turbo the volume is equivalent or greater than the two pipes - so at least 3.5" but probably 4" feeding the turbo

@marksmith2726

Жыл бұрын

@@aeroflowperformance Ok great thanks for the reply, so when it merges into one go 4 inch pipe. Just got to work out a turbo now !

@aeroflowperformance

Жыл бұрын

@@marksmith2726 we can help with turbos too! send us an email sales@aeroflowperformance.com

Are they available for a 4th gen camaro?

@aeroflowperformance

Жыл бұрын

You may be able to customise them to suit however they are not available specifically for Camaro

@martygrajeda3457

Жыл бұрын

Thank you.

Price for twins?

@aeroflowperformance

Жыл бұрын

Hi Mas, you can see them on our website here: aeroflowperformance.com/af8200-2000-gm-ls-twin-turbo-manifolds

Is anyone selling your twin turbo ls manifold in the U.S.A

@aeroflowperformance

8 ай бұрын

We ship at least one set to the states every month!

@louisward3654

8 ай бұрын

@@aeroflowperformance I will be ordering a set very soon. What material are the twin turbo ls manifolds?

@aeroflowperformance

8 ай бұрын

@@louisward3654 brilliant thankyou. They are made from Steam Pipe, otherwise known as Carbon Steel

@louisward3654

8 ай бұрын

@@aeroflowperformance low, medium or high carbon steel so I know what I'm dealing w welding?

@aeroflowperformance

8 ай бұрын

It's a low carbon steel👍@@louisward3654

they wouldn't fit a VE as wouldn't pass the power steering pump on SSV, on a large turbo T6 not enough flow be an issue with spooling up, the only way to get the best set up and flow is build your own or pay killa boost $3600 which is a total rip off

40 seconds of intro? Wtf

@aeroflowperformance

Жыл бұрын

Lucky you can skip ahead! Don't worry, we're workin on it - the Video guys just love telling a story 😜😜

The twin setup is terrible ! You can’t feed 1 bank into the back of the other bank you end up with major hot spots. 1 bank ends up way hotter than the other. Cross over needs to feed into the turbo flange. Aerofail !