Jak mnenit rgb kdyz mam jinou koncivku na reset?

Quantum Mesh? Time to do a Quantum Break special theme build bro.

@PCCrazyDario

2 жыл бұрын

Just wait an see something coming soon. :) Custom build of course. ;)

You think the non mesh version is gonna have bad airflow? the front is solid plastic and I wonder where the air comes in from.

@PCCrazyDario

Жыл бұрын

From nowhere. I would go with a solid front panel. Only mesh.

it's a shame the front fans arent a bit further down, that would definitely be better for thermals.

@PCCrazyDario

Жыл бұрын

Or at least 3x 120mm adding one more at the bottom...

@IskanderVFX

Жыл бұрын

@@PCCrazyDario that's what I did, the cooling is awesome for so little space, but on the lights part... it seems I did some wiring wrong, when I push the reset my system... reboots, tried it just right now! 🤦‍♂🤣... now thinking better I most had connected the reset switch to the MB... isn't any other way to control them?

@PCCrazyDario

Жыл бұрын

@@IskanderVFX The reset button cable needs to go to a small header at the back of the case. If you want to control the LEDs you can't have a button for manual reset of your PC. Unfortunately, AeroCool only makes ARGB fans for their either, specific controller, or direct plug with LED button.

hey man i just built my first pc i see everything moving the gpu,cpu etc but the fans arent moving neither are they turning on do you have a solution i dont understand the fans cables all of them are connected to some kind of a sata power and i dont need a sata power cable since i will not be using one

@PCCrazyDario

Жыл бұрын

You need to connect the SATA POWER cable from your PSU to the connector from the fans to power them on. Otherwise, they won't work. That is the only way they will spin unfortunately.

on the specs it says max gpu length is 297mm, but do you think rtx 3070 with 305mm lenght will fit?

@PCCrazyDario

2 жыл бұрын

I honestly don't think so, just because the side parts of the case where the TG goes are sticking out and that shortens your ability to place the GPU inside normally. I even had the problem with this one I have here.

@giorgio5789

Жыл бұрын

yeah, it also says heatsink max height 158mm but my current case (deepcool e-shield) says 165mm and my heatsink (arctic 34 esports duo) almost touches the glass. I was looking into a smaller case, but maybe this is too small

I need your help please. My fans are going straight to molex connectors. How am i supposed to change the rgb?

@PCCrazyDario

2 жыл бұрын

If we are talking about these fans in this case, then you have an LED button on top of the case and that is how you change the colors.

@achilles055

2 жыл бұрын

@@PCCrazyDario Thanks for answering but i got my answer from aerocool technical support. There are three different versions of the case. V1 no rgb. V2 non addressable rgb. V3 addressable rgb

@PCCrazyDario

2 жыл бұрын

@@achilles055 Glad you managed to get a reply from their support.

Maybe late to the party, but will a 295 mm gpu fit in here.. it says 297mm just wondering

@PCCrazyDario

Жыл бұрын

That will be a really tight squeeze, but with a bit of a wiggle I think it should go in.

does this case fit an ssl size motherboard?

@PCCrazyDario

2 жыл бұрын

Honestly, not sure. I can't say exactly since I don't have that kind of a motherboard to try it out. Sorry.

show us if there are any dust filters in front or below!

@PCCrazyDario

Жыл бұрын

Front no dust filters. Eventually below for the PSU.

can it fit a aio with a full atx mb ?

@PCCrazyDario

Жыл бұрын

Supports it on the front part of the case. Here is the information from their official website: "Front: 120/240/280mm Radiator (for 280mm, supports max length of 323mm and max thickness of 28mm)"

can you change color

@PCCrazyDario

Жыл бұрын

With a press of a button on top of the case. ;)

how did u change the lights mode? did u use thirtd party software?

@skautcloud

2 жыл бұрын

Nope you use the reset button by connecting it to the fans at back

@mrcapucino

2 жыл бұрын

@@skautcloud i got a molex port fan, is it possible?

@skautcloud

2 жыл бұрын

@@mrcapucino the cable for rgb comes from the panel above the case it doesn't come from psu, just look for a tiny cable that is not connected to anything from the ones that come from the case front panel. Eg USB 3.0 Cable

@PCCrazyDario

2 жыл бұрын

@@skautcloud Thanks for helping out. :)

@skautcloud

2 жыл бұрын

@@PCCrazyDario man i appreciate it i love your reviews . do you have a review on H212 cooler master cpu cooler?

hi i have a question , imagine an RTX 3060 gaming X (2 fans - 276mm) i think that it will be perfect with it what do you think.

@PCCrazyDario

Жыл бұрын

Yeah, indeed because it supports GPU up to 297mm (without front radiator). ;)

360p -.-

@PCCrazyDario

2 жыл бұрын

You are too early. KZread is still processing 4K :D