If you find any unauthorized reproduction of the JSK-koubou video, please report it to me. Thank you. JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。

@Kris-82

9 ай бұрын

can you share model of the planer. It has really nice blade tuning feature

Que buena recomendación la de verificar la planitud, antes de usarla. Esa rectificación es lo correcto. Estupendo trabajo. Gracias por tu tiempo y mostrar cómo podemos modificar y hacer nuestra canteadora.

I am not even a woodworking person nor have a workshop, but watching your videos feels: 1- relaxing 2- really tell how work in Japan is: small steps, get into details and achieve nice task... I can tell because I work in a Japanese company near Nagoya!

いつ見ても、鮮やかな手つき完璧👍👍👍👍

Thanks for posting! I never took the time to check if my electric planes were... well... "plane", as I only used them for roughing. After viewing your video, I checked and the oldest (20+ years) is acceptable, but the newest is just like yours - some precision work ahead required, because I intend to convert it to a jointer.

I learn a lot with your videos, thank you for these precious tips, Antoine

Thank you JSK! Exactly what I was looking for today! You solved my problem!!

Can't wait for the jointer improvements!

좋은정보 감사합니다. 항상 잘보고 있습니다.~^^

What a neat work of explaining 👌👌love all your videos my friend 😊. Thank you

thank you! this video was so helpful. I still have to do a little bit more fine tuning on blade height but overall result was successful.

wow, great video. I was having some trouble with my planer too, i will fix it tomorrow, thank you.

Only for craftsmen, who know the real value, for machines.😊😏✌👌

just what i wanted to see! i didnt wanna mess up even my cheap ryobi but since you did it to a makita i feel more confident lol

Great video Friend! Thank you for sharing it with us.👌👍😎JP

Super! Thanks for sharing.

Very good information. Remember though that your fingers are only an inch away from the spinning cutter head and the feed pressure you are applying is down into the danger area. Be smart and always use some sort of sacrificial pusher to feed narrow workpieces through the jointer. If your hand isn't comfortably above the fence it's too close to the spinning blades. Love your fingers. It's very difficult to glue them back together and your reflexes won't save them. The jointer/hand planer is the most dangerous power tool in common use. The hand planer has no blade guard and takes a while to spin down and the jointer invites you to pass your hands directly over the blades. Fifty years of woodworking and I can still count to ten with my fingers. Work safe.

@bobcharlie7982

2 жыл бұрын

Iv seen someone take off the end of there finger on an electric plane. After that you learn to always use them sensibly

про шлифовку постели рубанка-это замечательно!!!! Отлично!!! Спасибо. Привет из России.

@user-lr7qz8bu8t

4 жыл бұрын

которую брать зернистость наждачки, и во сколько этапов шлифовал?

@andreypleshankov3267

3 жыл бұрын

@@user-lr7qz8bu8t Зерно: A120, сама наждачка D745F Buffalo NCA.

Nice job. Congrats and thanks for share.

Pretty dope !

Mine doesn't have the blade adjustment screws. It comes with a plastic block to set the blades. Still trying to set them up right.

Thanks. This helps me a lot 👍👏👏👏

professional. Well done

Frickin genius.

👍👍👍

계양것도 좋아요~^^

JSK THE BEST 👍

Спасибо.

I recently came into possession of Makita planer that was previously owned and used by someone else, it's all genuine and tried setting the blades using the guide block that came with it but the blades are still slightly proud when the machine is set to zero, might have to add a feeler gauge to the block with setting the blade, can't think of any other way, there's no adjuster screws once mounted the setting is done with the guide block.

This means that we can't even trust big brands like makita ... Well done ..... well done. I have a question, have you also measured the accuracy of the cutting index?

Thank you

Muito bom, preciso nos ajustes.obrigado.

Super 👍

Great video, i would like to sand my platten too, what sandpaper grit do people recommend ? Just one or several grits ? Which grit ? Thanks 🙏🏻

Nice ! What is the model of your makita power planer ? I like the way that you can micro adjust the blade height.

Thankyou

Cécé your transfer of knowledge.

Hi JSK how many grit sandpaper did you use thanks

use full video friend

Should try it out on a wider piece of wood to make sure it’s level all along the blade

Did I miss it or did he not mention the grit of the sandpaper?

Спасибо!

so this is how to calibrate a new planer? every new planer needs to calibrate right?

Good idea, I like to watch it well done. I am from India Leh Ladakh I like to buy it so how to I contacted you

hi, did you remove the blade first before making adjustments on the base?

Good 👍🍇🌹🍎💰

nice, but i bought a bosch planner because i dont need to adjust the blade.just slide the blade in.

What grit sandpaper works on the aluminum?

This works great if you’re a MIME!

what paper grid do you recommend for flattering base plates of the planer ?

@arisskarpetis

Ай бұрын

Just did mine today. 240 grit until flat, then 600 to finish off. Used wet sandpaper. Got a mixed pack from an auto shop. The pieces were not long enough but after i laid down long pieces of double sided tape, I stuck down the pieces of paper butt up against each other. Seems to have worked fine. Used my jointer / planer out feed table as the reference surface.

now, how do i get the flat wood?

🖒🖒🙌🙌

What grit sandpaper are you using?

my blades dont sit square and as a result my shaved timber gets a slanted cut. Only just noticed it recently. either it was sent to me like that and ive failed to realise it or when i replaced the first set of blades i tightened one bolt too hard. i used the impact driver and think that may have done it. on your corded model there is an adjuster so i ran to mine to do it n there isnt one. its the makita cordless one. ffs. is that a clever nasty thing by makita or not?

It's sad that a $200+ tool requires this much fixing out of the box.

@julianezequiel9371

5 ай бұрын

Is corded that makita planer is 80-100usd

How do I adjust the roller

🇵🇱 👏

if do it 1:00 on bosch 1500, he break, becose blade adjust not work.

sir what is the model of your planer?

which model number is this from Makita. I cant find this model number is USA. All the makita ones have that shitty adjustment block for blade adjustment.

Привет из России!

Man, mine was way off out of the box!!

is that a sand paper?

@jisakukobo

3 жыл бұрын

Yes

My new Milwaukee plane it terrible! You can’t adjust the blades and it cuts on the wonk 🙈

Wood not straight properly

Rs.

Not sure why he did not adjust the height with the knob, and the blade with the aligning tool that comes with it?

@jisakukobo

4 жыл бұрын

Perhaps you misunderstood the main point of the video. The purpose is to create a flat surface.

@jisakukobo

4 жыл бұрын

あと、この鉋は廉価品のDIYツールなのでアライメントツールはありません。

@user-tp7uq1cn4v

4 жыл бұрын

@@jisakukobo Must or must not the blade protrude over the surface?

@jisakukobo

4 жыл бұрын

@@user-tp7uq1cn4v You don't understand the main point of the video.

@user-tp7uq1cn4v

4 жыл бұрын

@@jisakukobo Probably only the Japaneese do

excursion

A lot of advertising

^^