Adjustable sliding knot necklace - simple how to video
Simple tutorial on how to make an adjustable sliding knot necklace.
We use 1.5mm cord but you can use almost any cord with this technique!
Enjoy!
Music thanks to Ikson! Song is ‘hope’
Simple tutorial on how to make an adjustable sliding knot necklace.
We use 1.5mm cord but you can use almost any cord with this technique!
Enjoy!
Music thanks to Ikson! Song is ‘hope’
Пікірлер: 125
Thank you! I rewatched a few times, played with it and now I can tie a knot. Thank you again for your patience. You’re right, practice makes perfect. Bless you! Asé Amen A’ho!
literally took 1 watch and i made 10 of necklaces. thank you so so so much you are amazing! super easy explanation and straight to the point!
@creativefnk
Жыл бұрын
Thanks for the feedback! That makes me happy 😃 Glad my video was helpful. Thanks for watching 🌸
@Bycarola2019
3 ай бұрын
How do you get always same size for more of one specific necklace?
@stefan4212
2 күн бұрын
literally took 10 watches to fuck up 10 feet of rope
This is now the 3rd video I watched regarding "How to Sliding knots" and 3rd times a charm because yours was the best done! Thank you so much!
Thank you for this tutorial. It's exactly what I needed to make a necklace from a rose quartz my daughter gifted me. Feeling grateful today
@TherealBig_Al
28 күн бұрын
How did you get the string attached to the quartz?
Thank you sm for the video!!! The cord for a necklace I wear daily came untied and I was very distraught for a minute thank you for making such a cohesive tutorial
Thanks! I watched a lot of shorts where people weren’t explaining or going too fast. This made it so simple to understand it took one try!
@creativefnk
2 ай бұрын
Excellent! Glad to hear my video was helpful 💫🌻
so useful!! i could also easily see how she ties it unlike some other people. Thank you!
@creativefnk
Жыл бұрын
So happy to see this comment thanks for your feedback! Glad you enjoy my videos!
Wonderful, thank you! One of the knots of my slip knot necklace came undone, and your video was the one (after watching a few) that finally helped me understand how to tie it 😊🙌
@creativefnk
Жыл бұрын
Thanks for sharing that! So glad my video was helpful 🌻
@henrimeyer4644
14 күн бұрын
Same here, helped me fix mine as well
I slowed video down on 0.75 and it helped. Thank you for the video! I made double corded for my larimar stone!
Thank you so much! I tried several other methods to do this which were convoluted. You make it so easy!! Much appreciated.
@creativefnk
11 ай бұрын
So happy to hear that! Glad it was helpful 🌻
Thanks a bunch!! I had a really important charm I wanted to put on a good necklace and I was able to make one with a shoe lace with your help!
@creativefnk
8 ай бұрын
Yay! Thanks for your feedback, so glad my video is helpful 🌻
Thank you! I was thinking of this and you showed me how. I did it. Now I’m ready to put holes in my shells. ❤
@creativefnk
Жыл бұрын
Yay! So glad you enjoyed my video! Thanks for watching 🌻
Amazing video!!! Ive watched multiple tutorials without any success, until I found this masterpiece. I thank you for this
@creativefnk
Жыл бұрын
Excellent! So glad my video was helpful! Thanks for watching 🌻
Thank you. You give great instructions.
thanks for this, i painted a dollar for the girl im talking with. we're gonna meet for the 2nd time and i was literally crying bcoz idk how to knot like this. now i got it thanks💟
KZread is the best website of all the times thank you ma'am
Hi. Thank u. It's so easy. Now I'm going to watch the video a few times more so I can. Remember it forever. Very helpful thank you 😎❤️
thank you so much! i have a flat pendant with a hole that was too small to push a folded string through, this helped immensely in attaching it
@creativefnk
Жыл бұрын
Excellent! Glad my video was helpful! Thanks for watching 🌼
Oh gosh, perfect explanation, thanks!
@creativefnk
Жыл бұрын
Perfect! You are welcome glad you enjoyed! 🌻
Great video, simple and effective. Thank you!
Thank you so much for helping me make this necklace ❤️😊
For the 50" length- Where does the pendant sit on a typical neck- chest without being adjusted? And does this knot allow the necklace to be worn higher up to the throat or do you suggest using less total length to accomplish this rather than the full 50". Just not sure how much it tightens and what it looks like when it does so. Drilling boulder opals for pendants, And let's just say i'm not knot/ necklace savy 😂 Australian opal cutter, novice jewelry making skills. Cheers
Appreciate you! I watched other methods and I guess because my cord is small in diameter and length (precut rope and pendant bought on a whim), either the knots would get pulled too tight and I couldn’t slide them or I couldn’t do their methods because it was too hard without a lot of slack. Your method made it so much easier for me! I have one suggestion (and please feel free to ignore this if you are not looking for suggestions for your videos) for us who need the “knots for super dummies” speed 😂- if you slow down the speed during the second or two when you’re actually doing the tying motion, it might be a bit easier for us, the viewer to follow along. Hitting the rewind 10s function brings it back too far and trying to slide the slider bars just enough for that couple of seconds while also following in real time is so tedious lol. I’m just nitpicking here and either way you’re so helpful and I am grateful for your video! It was still informative and helped me! Thank you so much!
@creativefnk
11 ай бұрын
So glad it was helpful! Thanks for your feedback! Always looking at ways to improve. Such a fine line with video speed, users want very fast content these days! Thanks for watching 🌻
@Crafting_With_Laura_x
3 ай бұрын
You can hit the settings button at the top of the video and it slows the video speed down for you. 😊
@Crafting_With_Laura_x
3 ай бұрын
@@creativefnkif people click on the settings above the video, you can choose a speed for the video, you can slow it right down if you need too x
@diannapia
3 ай бұрын
@@Crafting_With_Laura_x thank you!
Thank you so much, I was struggling with this but took to your method much easier.
@creativefnk
Жыл бұрын
So glad my video was helpful! Thanks for watching 🌻
What length is a good one to make the initial starting cord for a guys necklace that typically wears the pendant just a couple inches below the t-shirt collar? It looks like 50 inches would be a bit too much waste maybe?? Great video and you definitely have better, clearer instructions than other videos I've watched. Thank you
Beautiful. Thank you. ❤
@creativefnk
Жыл бұрын
Thanks for watching 🌻
ahh this is so clear thank you!!
@creativefnk
Жыл бұрын
Thanks so much for taking the time to comment and let me know! I’m so glad you found it helpful! Thanks for watching 🌻
I've been trying to figure out that knot, but it just falls apart when I try to tighten it
This helped.. Thank you ❤️
Just fix my favorite necklace thank you!!!!!
@creativefnk
Жыл бұрын
Amazing! So glad I could help! Thanks for watching 🌸
i have a kind of slippery silky cotton cord to use-and I've lost 2 pendants recently b/c the knot I tied just simply opened and the cord stayed around my neck and the pendant went bye bye. Do you think the slippery cord will work? what I'm hanging is kind of heavy.
@creativefnk
Жыл бұрын
Hmmm slippery cord is a bit risky unless you can tie the knots super tight. I find a waxed twine is better because it grips without coming undone 🌻
Bugger, cut my cords too short before I watched your excellent video.
I have a premade sliding neckalce with a pendant. But I have a new pendant I’d like to try. Is there a way to undo a sliding necklace to add a new pendant?
So helpful. Thank you!!
@creativefnk
Жыл бұрын
Great! Glad my video is helpful 🌻
Oh thank you so so much for this simply way to do a sliding knot
@creativefnk
Жыл бұрын
So glad it was helpful 🌼
Loved it.
Thank you for this tutorial. I made one. It's easy to follow. Like it
@creativefnk
Жыл бұрын
So glad it was easy to follow and helpful! Thanks for watching 🌼
Thank you for this wonderful tutorial, just a question tho, I want mine to be more of a choker length at its tightest and have just above the cleavage at its longest, can you recommend how long my total cord should be? Thank you! 💕
thank you very much, can you send me the link where you buy the cotton cord? i cant find . thx
@creativefnk
Жыл бұрын
See my other comment reply for the 1mm waxed twine or you can also use 2mm leather as seen in some of my other videos. Just depends the thickness you want. Good luck! creativefnk.com/products/2mm-leather-cord
Yes! Thank you this was perfect 😊
@creativefnk
5 ай бұрын
Excellent! 🌻💫
what material is the necklace
so helpful thank you!! 🤍
@creativefnk
10 ай бұрын
Glad you enjoyed it 🌻
Please give me products name
Thank you.
i cant find good cotton cord, so if you any recomand for a good one?
@creativefnk
Жыл бұрын
Good supplies are hard to find! I mostly use 1mm waxed twine for sliding knot necklaces. You can find it on my website here creativefnk.com/products/1mm-waxed-twine
Hi, love how easy is to make this, I have a question... a few months ago I bought a adjustable choker necklace and after a couple months just broke in two,tried to fixed but broke again. My question is what's the best durable material I can use for this type of necklace? Thank you!
@bigiron5508
Жыл бұрын
I have the same problem, the leather cord I use is spliced together and always breaks at the splice. Frustrating for sure.
@creativefnk
Жыл бұрын
Great question! I love leather but find it does break after a while. I find waxed cords more durable so try a waxed cotton or waxed polyester cord 1-2mm and it should last much better. Good luck! Thanks for watching 🌻
Thanks so much!
@creativefnk
9 ай бұрын
🌻💫🌼
It is helpful. Tks
does 1mm make any difference
Thank you!!!🙌 💗
I watched 6 videos before finally stumbling on this one and actually managed to do it😂
@creativefnk
Жыл бұрын
So good! Thanks for sharing. Glad my video is helpful 🌻
Wow well done
How do I adjust mine to make it longer?
@creativefnk
Жыл бұрын
You can loosen the knot and slide it along the thread before pulling it tight again
Thanks!
in my opinion it’s a little hard to make then again I think everything’s hard on KZread
@creativefnk
Жыл бұрын
Keep practicing! Nothing is easy at the start 🌻
@user-jy1vz9fb6t
8 ай бұрын
Eureka!! Thank you so much!!❤
@drscruffylupagus
5 ай бұрын
Better than the one with 45k likes that I rage quit on. 🤣 I love the knot to hold the shell in place too. 🙏
Thanks for the video. I will be making something like this for my 7 year old daughter and this video is helpful. I see you are in Australia but it sounds like you have a Kiwi accent.
@creativefnk
Жыл бұрын
Haha sure am! Kiwi living in Oz! So glad you enjoyed my video! Thanks for watching 🌼
It feel like my necklace is stuck and i cannot make it smaller any tips
@creativefnk
10 ай бұрын
Are the knots together? Or near the pendant? You may need to untie them and retie them in a better position. You should be able to slide them to make it bigger or smaller, if not - the knots are in the wrong position and you need to re-tie them. Good luck 👍
U help me today thanks
Thx 🙏🏽
@creativefnk
Жыл бұрын
Thanks for watching 🌻
Thnkz akki❤
@creativefnk
8 ай бұрын
🤩
Cheers
I did it lol thank you
@creativefnk
5 ай бұрын
Yippee 🥳
@ritikamandal6253
3 ай бұрын
Hii can you tell me which type of thread did you use??
@niyatichowdarykollu9649
3 ай бұрын
@@ritikamandal6253she uses a cotton cordd
@ritikamandal6253
3 ай бұрын
@@niyatichowdarykollu9649 this cotton cord is thick but which I brought is thin and it is so flexible
Thanks 💞💞💞💞
@creativefnk
Жыл бұрын
Welcome 🌻
thank youuu
@creativefnk
Жыл бұрын
Thanks for watching 🤩
Am I the only one thinking of “where the crawdads sing” 👀
thanks
@creativefnk
Жыл бұрын
You're welcome! 🌻
This is my third video I’ve watched and I can’t get it 😭 I think I’m stupid
@amber189-3
5 ай бұрын
NEVERMIND I GOT IT GUYS!! I’m so excited. Thank you!!!
@creativefnk
5 ай бұрын
Excellent! Just needs practice huh!! So glad my video was helpful 🌻💫
how much cm do you use ?
@creativefnk
Жыл бұрын
It’s about 127 cm 🌻
I took 10 watch and made 0 of necklace!!!! :( but thats on me
@nc-ou3nu
Ай бұрын
I took 10 of necklace and made 1 watch
@nc-ou3nu
Ай бұрын
that's on me, too
@mohzmmedzia3165
17 күн бұрын
I made it in one watch. I think u r not so smart