Acus M1 vs Spektra Flux - The Battle - A batalha entre as máquinas [PT BR | EN subtitles on desktop]
Ойын-сауық
Se você tivesse 1300€ no bolso qual máquina compraria; Spektra Flux ou Acus M1? Neste vídeo de batalha entre máquinas iremos comparar fatores como tamanho, peso, interface, ruído, vibração, E OUTROS! Acompanhe até o final e surpreenda-se
Grupos no WhatsApp para tatuadores: compreblackbird.com/grupos-de...
👇🛒 Links que ajudam o canal a continuar crescendo 🛒 👇
📒Cursos:
- curso de tatuagem botânica: t.ly/CursoTattooBotanica1
- curso de retrato em aquarela: t.ly/CursoAquarela
⚙️ Equipamentos que já fiz ou ainda vou fazer um review:
- cópia da Spektra Flux bem avaliada e entrega rápida para o Brasil: s.click.aliexpress.com/e/_9Hxnub
- Impressora térmica para decalque: s.click.aliexpress.com/e/_ACIztN
- Bateria wireless Arenahawk: s.click.aliexpress.com/e/_ABXwI3
✏️ Equipamentos usados aqui no estúdio:
🛒 Impressora para decalque alta resolução: s.click.aliexpress.com/e/_9QD2Vt ou s.click.aliexpress.com/e/_9JXRQB
🛒 Cartuchos EZ V-Select: s.click.aliexpress.com/e/_A5xMJl
🛒 Cartuchos EZ Revolution: s.click.aliexpress.com/e/_ArxDzd
Equipamentos para gravar os vídeos do canal:
Microfones:
Takstar sgc-600 s.click.aliexpress.com/e/_AnAk3N
Boya BY-M1 s.click.aliexpress.com/e/_A2QH59
segue a gente no insta:
@rafa.blackbird - / rafa.blackbird
@luiza.blackbird - / luiza.blackbird
@studioblackbirdatelier - / studioblackbirdatelier
Пікірлер: 50
Parabéns pelo review! Os melhores do KZread! Adorei a Acus M1! Pergunta: será que consegue um review da Bronc V2 Wireless? Valeu!
@BlackbirdAtelier
Жыл бұрын
Se ela chegar na minha mão… seria top de mais! Haha
Eu arriscaria na Acus ...e parabéns pelos vídeos sempre muito bem explicativo
@BlackbirdAtelier
Жыл бұрын
Valeu mano! Obrigado pelo comentário
Muitombom o video, mas você esquecendo de falar que a Acus M1 é umamaquina feita Pelos engenheiros da Cheyanne, pois deixaram a Cheyanne e ligo fizeram a Acus M1 e também pode ser esterilizada quando desmontada, e também pode comprar as baquetas com opção de serem mais pesada, também tem outros curso que pode comprar, como 5.0 - 4.1. Eu aconselharia a Acus também pela versatilidade que tem, e pode ser usada para vários estilos. Eu comprei uma e é muito boa a máquina.
@BlackbirdAtelier
4 ай бұрын
Estes cursos que você menciona são posteriores ao vídeo. E acredito que só um dos sócios trabalhou na cheyenne!
Estou a espera da minha M1 e estou em pulgas. É pena que não te tenham dado o código de desconto, teria sido bom para ti e para eles tb, pois teria comprado através dele. Parabéns pela comparação.
@BlackbirdAtelier
Жыл бұрын
Maaaaano… eu tenho um código (não ganho nada com ele) mas esqueci de por no vídeo 😰😭
@bullsheeptattoo
Жыл бұрын
@@BlackbirdAtelier coloca lá que pode ajudar alguém, ainda são 123 euros em desconto, vale a pena.
Estou realmente querendo uma M1 nao vejo a hora de ter essa grana nas maos, obrigada pelo esclarecimento, ja estou inscrito no seu canal.
@BlackbirdAtelier
Жыл бұрын
Opa. Feliz em ter ajudado. É uma excelente máquina.
What is everything what we need in tattoo machines ? For example functions or motor brand or metal
@BlackbirdAtelier
Жыл бұрын
That’s so particular. Every artist has different preferences. I search mainly for a weight less then 200g and low vibration… and of course, constant frequency.
@alexkilla434
Жыл бұрын
@@BlackbirdAtelier yes but what engine is the best for you ? And also mechanism ?
É incrível ver como uma máquina top de linha custa um pouco mais que um salário mínimo, fora do BR, e aqui, essas mesmas máquinas estão na faixa dos 10 salários.
@BlackbirdAtelier
Жыл бұрын
Infelizmente o poder de compra do brasileiro é muito baixo, e nossa moeda muito desvaloriza 😔
I m sorry i don t understand Portuges . We know what we know about each maschines and i heard a lot of informations about Acus M1. But if you would do a blind test with this two maschines would you feel and see any different? I just ask you because i have the Spektra flux and the Flux max 4.5mm but i m thinking to buy this Acus M1 maschine. Is there a hughe different between thoose maschines that you would say "yes we need to buy this Acus M1 definitely cause it's light years better than the Flux" . Thank you if you answer for me :)
@BlackbirdAtelier
Жыл бұрын
Brow, you have two great machines. Are you missing something from the Spektra they doesn’t give you? Are you missing power, softness, less vibration or noise? Because, of course the Acus is different machine but I would not say it’s a massive difference in quality or what you can get with both machines. Acus has less vibration and noise, hit softer and has different strokes and motor modes to choose, but it’s harder to wrap, to change the batteries, you can not change the stroke “on the fly”… there’s many things to consider. If you have the money you can check it yourself, but have you considered you don’t have issues with your equipment?
@mariokatulacs7706
Жыл бұрын
@@BlackbirdAtelier Thanks for writing back. Actually, curiosity drives us, and as it usually happens, those of us who work in this profession are almost obsessed with trying out the new machines that have just been launched. But what I have observed over the course of 23 years is that when a new machine was launched, everyone praised it because it was better than the machine that came before it, but there was not really a radical change. I've been following this Acus machine for a while now and also the comments they write, what I see is that after a few months they sell it because it's still not that good blah blah blah. It's more the addiction that speaks of me and the curiosity, but on the other hand I'm sane and I'd rather ask than spend a lot of money for a machine that I'm not sure would know more than what I'm currently working with. But if I understood Portuguese I wouldn't have asked you :) But anyway, thank you for writing. Cheers
Hi, after some months of use, do you think that acus m1 is better than bishop wand packer or flux?
@BlackbirdAtelier
Жыл бұрын
Unfortunately that Acus wasn’t mine. I just used for a month and sent back to the brand. My main machine today is this one here: s.click.aliexpress.com/e/_DDUuf4x and some times I use the bishop just because I miss it 😅
@BlackbirdAtelier
Жыл бұрын
The problem with the M1 is that to change the battery you have to desamble all the machine, and weap it is a pain in the S
@BlackbirdAtelier
Жыл бұрын
I’ve a friend who changed the M1 for two of this s.click.aliexpress.com/e/_DD6tbp7 so he doesn’t need to change strokes (what’s also a pain in the S on M1)
@francescoiaccarino5798
Жыл бұрын
Okay thank you, could be a 150$ machine better than a $1300 one? For the quality, the motor, and the precision...
@BlackbirdAtelier
Жыл бұрын
As good as the expansive one! The differences are: Brands The hour payed for the workers in USA/Germany or China And also the quality control. Anyway, with the giant difference of prices, any trouble you have with chineses machines you can always repair. Even if you broke the whole thing, you can buy like 8 machines with no reaching the price of the big brands
In English?
@BlackbirdAtelier
Жыл бұрын
Sorry. I had trouble uploading the “srt” file in English, but i did it in portuguese, so if you use the desktop version on your browser (even in your smartphone) you can choose the auto translation to any language from my portuguese file. I hope it helps you 🙏
English subs pls
@BlackbirdAtelier
Жыл бұрын
Try the desktop version and you may find the subs. Sorry for the inconvenience
Acus + menos vibração
@BlackbirdAtelier
Жыл бұрын
Desculpa mano, não entendi. Foi uma pergunta? 😬 tmj
Fk irons is losing their way they need to stop copying the competition and think more about what artists really want with so many amazing ones on their team you think they would have a better idea about what we really want in a machine acus figured it out really quick even though fk irons has years more experience
@BlackbirdAtelier
Жыл бұрын
Even some chinese brands, famous for copying in the past, now are making machines as good as fk or cheyenne (for the half of the price) 😅
@x_z0mb1_x
Жыл бұрын
@@BlackbirdAtelier it's 100% true the big boys have competition!
@x_z0mb1_x
Жыл бұрын
@@BlackbirdAtelier you say half the price actually 1/8th the price it's crazy! Worse than you think! I hope we can find balance and just get more awesome machines!
@alexkilla434
Жыл бұрын
Sorry bros but what you think about aitenitas pens ? Im going crazy I can’t understand which machine i need
@x_z0mb1_x
Жыл бұрын
@@alexkilla434 you need a machine that makes the needle go up and down, that is all, don't buy into the hype, that ai tenitas just copied Cheyenne I wouldn't buy one it's too long anyways and the sloped top I feel would get annoying to me
@blackbirdatelier do you have a discount code for this?
@BlackbirdAtelier
Жыл бұрын
Sorry. I don’t have