it worked for me, engine light and awd light went off on first start after changing the sensor, hardest part was to untight the old one.I put "loose nut" on the bottom of the sensor with a paint brush , waited 20 min. and it came loose. thanks a million times
@Rebelsmic8 жыл бұрын
Also do remember that if u choose to disconnect your battery. The Radio and Navigation will require a #Code... if u dont know the code,just visit or call your Acura dealer. Proof of registration maybe required. (u can write it down in the vehicle's manual for future reference)
@ej16443 жыл бұрын
Great job..I needed this 🙌
@erikarodriguez3140
8 ай бұрын
Did it work For You following the same process he did?
@wllmmena9 жыл бұрын
Very helpful thanks!
@erikarodriguez3140
8 ай бұрын
Hi did it work gor You please let me know
@falla51562 жыл бұрын
Great video. Hope you will have a video for Bank 1 Sensor 1
@ruthlesssociety51503 жыл бұрын
Good work bro
@Rebelsmic9 жыл бұрын
Your welcome mena.
@apemanshaved15 жыл бұрын
So the light won't immediately turn off after replacing O2 sensor? Just replaced and emission and shd lights still on. Any advice is much appreciated. Thanks
@kevinfuller77377 жыл бұрын
I have a 07 Acura RL, and for my emissions light, all I did was take off negative battery connection for 2 minutes. That's it, plus RE-enter your pass codes.
@TriggaFlex
7 жыл бұрын
Kevin Fuller ...... temporary......code will return
@kevinfuller7737
7 жыл бұрын
+Trigga Flex sh**, if it returns I'll check your vids again, thx.
@womack1324
4 жыл бұрын
@@kevinfuller7737Fuller once the computer reboots it will return.
@maxinemccauley74118 жыл бұрын
Does this apply to my Acura 2008 RDX. Started happening after the transmission fluid was changed?
@Rebelsmic9 жыл бұрын
#Thumbs up*
@BangBang-ge6tw7 жыл бұрын
I was switching my Air filter and accidentally disconnected wire that was connected to the air filter but quickly pluged it back in, and after switching the filter and started my 2008 MDX I saw the *Check Emission system" Will the codes come back or do I need to take it in?
@victorpuente45253 жыл бұрын
Ho do you reset emission light?
@fgvmadieglez4563 жыл бұрын
Please help with the PO134
@robertguy50635 жыл бұрын
After filling up my gas tank on a cold day a tighten gas cap light came on. So I tighten it. The next day the emission light came on. I checked it with FIXD app and it said to give it a few days for the light to go out. Problem was minor. After a few days the light turned off and the gas tank was less than 3/4 full. I think the problem is filling up your tank on a cold day.
@tkd4bun8 жыл бұрын
my acura mdx 2008 after replace the senor .. 3 month later the emission light came back on what cause this...?
@Rebelsmic
8 жыл бұрын
Are u sure that it's the same bank and sensor?.. first thing i would do is to get a rescan. This suv comes with 4 different sensors. The one that i replaced was bank 2 sensor 1...
@tkd4bun
8 жыл бұрын
+Trigga Tube yes and i check it to make sure all the wire is the same.. i got the senor from rockauto for 2008 mdx.
@tkd4bun
8 жыл бұрын
+MBH TKD my car is 2008 mdx aura got the from your youtube bosh 13954
@Rebelsmic9 жыл бұрын
O2 sensor tool. 7/8 or 22 www.google.com/search?redir_esc=&client=ms-android-sprint-us&hl=en-US&safe=images&oe=utf-8&q=o2%20sensor%20socket&source=android-browser-suggest&qsubts=1423636192188&action=devloc
@edgardiaz53407 жыл бұрын
Drive car as you stole it?.. lol
@Rebelsmic9 жыл бұрын
Video fix--- kzread.info/dash/bejne/dJhlutSOedS6gZs.html
@erikarodriguez31408 ай бұрын
Ey i replacd the same one you did in uour video abd it kkeps giving me tge same code back again and sgain ,even when back to store and bought the oms or sumbullhshit like that cuz supously that the original densor and still give me back same code.PO154 .mine its a 2003
Пікірлер: 28
it worked for me, engine light and awd light went off on first start after changing the sensor, hardest part was to untight the old one.I put "loose nut" on the bottom of the sensor with a paint brush , waited 20 min. and it came loose. thanks a million times
Also do remember that if u choose to disconnect your battery. The Radio and Navigation will require a #Code... if u dont know the code,just visit or call your Acura dealer. Proof of registration maybe required. (u can write it down in the vehicle's manual for future reference)
Great job..I needed this 🙌
@erikarodriguez3140
8 ай бұрын
Did it work For You following the same process he did?
Very helpful thanks!
@erikarodriguez3140
8 ай бұрын
Hi did it work gor You please let me know
Great video. Hope you will have a video for Bank 1 Sensor 1
Good work bro
Your welcome mena.
So the light won't immediately turn off after replacing O2 sensor? Just replaced and emission and shd lights still on. Any advice is much appreciated. Thanks
I have a 07 Acura RL, and for my emissions light, all I did was take off negative battery connection for 2 minutes. That's it, plus RE-enter your pass codes.
@TriggaFlex
7 жыл бұрын
Kevin Fuller ...... temporary......code will return
@kevinfuller7737
7 жыл бұрын
+Trigga Flex sh**, if it returns I'll check your vids again, thx.
@womack1324
4 жыл бұрын
@@kevinfuller7737Fuller once the computer reboots it will return.
Does this apply to my Acura 2008 RDX. Started happening after the transmission fluid was changed?
#Thumbs up*
I was switching my Air filter and accidentally disconnected wire that was connected to the air filter but quickly pluged it back in, and after switching the filter and started my 2008 MDX I saw the *Check Emission system" Will the codes come back or do I need to take it in?
Ho do you reset emission light?
Please help with the PO134
After filling up my gas tank on a cold day a tighten gas cap light came on. So I tighten it. The next day the emission light came on. I checked it with FIXD app and it said to give it a few days for the light to go out. Problem was minor. After a few days the light turned off and the gas tank was less than 3/4 full. I think the problem is filling up your tank on a cold day.
my acura mdx 2008 after replace the senor .. 3 month later the emission light came back on what cause this...?
@Rebelsmic
8 жыл бұрын
Are u sure that it's the same bank and sensor?.. first thing i would do is to get a rescan. This suv comes with 4 different sensors. The one that i replaced was bank 2 sensor 1...
@tkd4bun
8 жыл бұрын
+Trigga Tube yes and i check it to make sure all the wire is the same.. i got the senor from rockauto for 2008 mdx.
@tkd4bun
8 жыл бұрын
+MBH TKD my car is 2008 mdx aura got the from your youtube bosh 13954
O2 sensor tool. 7/8 or 22 www.google.com/search?redir_esc=&client=ms-android-sprint-us&hl=en-US&safe=images&oe=utf-8&q=o2%20sensor%20socket&source=android-browser-suggest&qsubts=1423636192188&action=devloc
Drive car as you stole it?.. lol
Video fix--- kzread.info/dash/bejne/dJhlutSOedS6gZs.html
Ey i replacd the same one you did in uour video abd it kkeps giving me tge same code back again and sgain ,even when back to store and bought the oms or sumbullhshit like that cuz supously that the original densor and still give me back same code.PO154 .mine its a 2003