Probably the best video with all the explanations I had in mind..I need to do this to my f80 🔥🔥

This has to be one of the cleanest F80’s I’ve ever seen. What a build man.

@carsoncolemanbm4

4 ай бұрын

That gunmetal grey is sooooooo clean! My e90 335 is the same shade so I've always had a soft spot for the super darker grey cars! I couldn't agree more with your comment brother! I'm trading my m550 in this week for a slightly darker grey then this one w only 45000 miles on it. I'm siked! Seeing this video is making me not sit still 😂😂😂😂! Stay safe brother great video and beautiful car!!!!

This sounds really good. I agree with you that louder is better. Excited to see what mufflers you choose

Been watching since the sti. I know youre such a great person

That intro is 🔥

Heck yeahhh man... sounds sooo good! The cold start was drastically louder and sounded mean!

@Scoobyfreak86

9 ай бұрын

Wait until you see the video coming out of the comparison between stock to this. It's a huge jump in volume!

“It makes the car sound 10x louder. Phenomenal” 😂

Great choice man! I should have went it single instead of equal length but i will eventually go single in the near future. Ur F80 is coming along great so far keep up the F80 content 👍 where in jersey are u from?

I have mine since 2016. All I can say is enjoy it, beat it, use it as intended. It won’t break! I have 75k miles and well over 100 track days and she is still perfect

@cryan6849

Ай бұрын

Crank hub ?

Love the sound! Adds a nice touch to the upgrade, can’t wait to see what else comes along. I noticed when you were on and off throttle you gas gauge fluctuates, is that normal?

@Scoobyfreak86

10 ай бұрын

Yes, on/off throttle aggressively to hear the hard decel noises. It’s addicting haha. Gas gauge moves as it acts as a boost gauge. This is shown when I did the bms valve controller install.

Remus axle back is the way to go. Definitely not the most budget friendly but you get what you pay for, and retaining the valves was a big selling point for me

@Scoobyfreak86

9 ай бұрын

yeah, remus or the dinan is on the top of my list. However, I very rarely use the valves. They are open 99.9% of the time. Currently debating on some other options as well.

Great video, would love to see a POV driving video with the new exhaust setup!

@Scoobyfreak86

10 ай бұрын

Coming! Full exhaust video will be out comparing stock to this. Lots of clips!

This thing is starting to sound MEAN! Can't wait for the WOT pulls and curvy road POV driving!

holy fuck it looks perfect

Fantastic video! I have BMW performance exhaust and was thinking about this mid pipe with resonators and their catted down pipes. I want the deep tone but not to loud. Any thoughts?

@Scoobyfreak86

7 ай бұрын

It’s a great piece to add some serious volume but keep the drone away and it still driveable for everyday.

Iv personally been contemplating on getting a Dinan muffler for my car to pair with the single midpipe but I'm curious on your thoughts of the mad max from active? I wish more ppl had it to get a better idea on it

@Scoobyfreak86

9 ай бұрын

I’m considering the madmax as well. Seems to do a good job and offering the best of both worlds. Just a bit funky looking, but definitely an option.

Sounds great! Curious, do you notice a performance hit with a single mid pipe due to potentially less flow?

@Scoobyfreak86

6 ай бұрын

Didn’t notice a difference at all. I have since changed the setup since this video.

Hey did you use the oem gasket where the downpipe and mid pipe meet? Just bought a use one not sure if i need to get new gasket

@Scoobyfreak86

9 ай бұрын

I reused mine. Only 19k miles on the car and they were in great shape. If you have more miles, I would recommend getting a new set.

It will be a lot louder once you add downpipes. Personally think the rear section is not needed. You can just swap the tips out.

So in this video are you running stock dp, single mid & stock muffler?

@Scoobyfreak86

9 ай бұрын

Correct

Looks good Chris, but I think it’s time to buy yourself a quick Jack. So worth it when working underneath the car or even just switching wheels

@Scoobyfreak86

10 ай бұрын

Haha you’re telling me. Every single time I have to do work on the car I yell at myself that I need to get them. Definitely in the near future!

@albertliong3172

10 ай бұрын

Just finished watching your Vlog and me watching you crawling underneath your car made my back hurts lol ..

@albertliong3172

10 ай бұрын

Just watched out for the Home Depot Black Friday deal, I bought my 5000lb quick Jack last year and it was $400 off , can’t beat it

@Scoobyfreak86

10 ай бұрын

Haha yeah I was beat up after this. Getting too old for the ol jack stands. Yes, planning on waiting for any holiday deals that come around. Most likely will snag one then.

You need some quickjacks my friend, they’re a great addition to the garage

@Scoobyfreak86

9 ай бұрын

haha tell me about it. I remind myself to get them every time I am laying under a car.

how do you always get a sweet shine on your cars!? they look amazing! I can't seem to shine my wrx like that

@Scoobyfreak86

9 ай бұрын

Car is ppf’d and ceramic coated so easy to keep clean.

@xzacto

9 ай бұрын

@@Scoobyfreak86 thanks, I'll keep this in mind for my future ride. Keep up the good work! 👌

I actually love stock sound of f80 m3 kept my m3 f80 fully stock and I'm glad I have!! Stock is best 👌

If you ever decide to get rid of that big can in the back Active makes a muffler called the MAD MAX it’s what I run paired with the single mp and it’s easily my favorite sounding set up for the S55. Great video as always

@Scoobyfreak86

9 ай бұрын

Yep, been looking into the madmax and a few others.

@SirBJH

7 ай бұрын

Have either of you looked into valvetronics single to el midpipe & muffler?

@Scoobyfreak86

7 ай бұрын

Briefly. I have changed my exhaust setup since this video.

@SirBJH

7 ай бұрын

@@Scoobyfreak86 what are you running now & are you happy with whatever switch you made & are you planning to change it further? & what kind of sound are you trying to achieve?

@Scoobyfreak86

7 ай бұрын

I went to a full inked custom’s setup. Yes very happy. Wanted to get rid of the rasp and buzzing associated with the s55. Check my other videos on my exhaust changes. Have a new video coming out next week with the latest change. kzread.info/dash/bejne/o3d4tNZuj926iaw.htmlsi=Yb_PjpLZG6Tpi-uL

So I basically have the same car (Gray 6 speed f80comp but with red int), and I did the same midpipe for the same reasons as you. Too much hype for equal length when you have to ring it out to high rpms to hear it sound good. The single midpipe lets you enjoy it all the time and gives you the deep sound that this car lacks otherwise. PS what's going on with your fuel gauge 21:40 . Is it indicating boost or something like that?

@Scoobyfreak86

2 ай бұрын

Yes. I was running the bms canflap module and you can turn the fuel gauge into a boost gauge. Anything over 5psi it kicks in.

21:06, What's with your fuel gauge. When you rev the engine the fuel gauge goes all over the place?

@Scoobyfreak86

9 ай бұрын

Bms valve controller. I go over it in that video. Gas gauge turns into a boost gauge over 5psi. kzread.info/dash/bejne/eppt1NKKfqrUec4.htmlsi=Wu_yvp3CNxGGg9B9

What air pressure you running on your tires? I have same wheels and tires. I find BMW recommendations to low.

@Scoobyfreak86

7 ай бұрын

33 or so

@vonfragyou

7 ай бұрын

@@Scoobyfreak86 I did some research and the calculated air pressure for those tires and axel weight is 41.5 PSI. I have been running 39 front and 36 rear and the car handles better. Recommend doing research, 33 is too low.

@Scoobyfreak86

7 ай бұрын

I don’t run these tires or wheels anymore

Did you notice your fuel gauge jumped @21:50? Normal occurrence or just random?

@Scoobyfreak86

7 ай бұрын

I had the bms valve controller on the car. The fuel gauge acts as a boost gauge. That’s why you see it move when under load.

Sweet looking M3 there buddy & a manual….😳. Sound nice until the pops & bangs started, got the titanium M-Performance system on my CS & comp cab, sound awesome 👌

@Scoobyfreak86

9 ай бұрын

Haha the pops and bangs are factory. Not my favorite and will be tuning them out eventually.

Is this resonated. Or non resonated mid pipe

@Scoobyfreak86

5 ай бұрын

Non

is this with stock DP's ?

@Scoobyfreak86

7 ай бұрын

Yes

It hasnt really solved the raspy dull tones these things make. It seems to be very difficult to solve. Most exhaust just make these things sound louder and its really not a good thing. Phil from Driftworks is working on some fancy exhaust downpipes and other bits to try and make these things sound more like an n55 screamer or more 2jz. The parts maybe produced for sale too which is promising. I know the equal length exhausts work well on these too.

@Scoobyfreak86

9 ай бұрын

Inline 6’s have a natural rasp that can be solved, but usually still is transparent on any setup. Ever experience an s54? Now that is rasp haha. But the aa single rectifies a lot of the bad tones and makes it way better with a simple solution. Should be interesting to see what Phil does, but usually when people add downpipes, it gets more raspy unless you move to a resonated mid section.

Will I be able to pass smog in California lmk somebody

@Scoobyfreak86

24 күн бұрын

Yes you’ll be fine as the cats are not touched and will still be emission friendly.

What’s wrong with your gas meter

@Scoobyfreak86

5 ай бұрын

Bms valve controller module allows you to turn the gas gauge into a boost gauge. When it his over 5 psi, gauge will move based on how much boost.

Sigh I really need to sell the Tesla & buy one of these. 😢

@Scoobyfreak86

9 ай бұрын

I support this decision.

🪚 lets go 🪚