Wish I had someone near me who was as passionate and knowledgeable about wrenching on Honda's as you are. Good stuff man!

@BruceLee-xp5fc

3 жыл бұрын

You can become that person yourself ! (If you wanna)

@98Kentuckian

3 жыл бұрын

@@BruceLee-xp5fc I feel like I am, but would be nice to not always be alone! Haha

@josuerivera5980

3 жыл бұрын

Where you from?

@desertadventures_

3 жыл бұрын

lol you and me both! ive been working on my db1 for 3 years and have some issues that would be nice to have somebody help me figure it out

@brianlo7012

3 жыл бұрын

Ééeéeeéeeeéeéeééeéeeeeém?

Always nice to get a message on my phone that you posted a new video, as a Honda nutcase i really enjoy watching it all the way in Europe. Keep on posting a big shoutout to the whole Honda community overseas!

'WELCOME BACK TO THE CHANNEL GUYS'... Yes my brudda, I look forward to watching all of your videos, great content. Keep up the good work 👍🏼

IDK why u don't have a million subscribers yet your content is awesome 👍

Bro I remember watching videos and you working on the car with the time laps running and you would fall asleep under cars lol love how you crank shit out solo bro you a true inspiration

Hey Dana love the video feeds bro and the knowledge you share with I could keep with it and convert it into my EF I just purchased a b16a that I'm gonna swap in gotta find a trans and find ur video on the harness build thanks and keep up the awesome vibe

When I leave the house, I leave on YoungStatic for my dog 💯

My blessing mi hermano!! 🙏🏾

7:58 "Dana... USE THE FORCE..." 😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣

Awesome vids bro. Inspiring G. I always tell myself like u say. Some progress is better than no progress.

Lovin the X man not many of us left out there. Love your brothers car sounds cool.

Love the EF content !!

Great content like always Dana and keep doing what you do 💯👍

Good stuff man.

Action FTW

Lotta you guys think I don’t drink water. I died laughing. People man. Thank for your time. You da man for real!

The krx looks sweet. Once you figure out whats wrong. Which I think you did. That will be some sweet pulls you do and should handle like a dream. Glad to see the sweet uploads.

You was getting at it today my man

😂😂😂 someone get this man a step stool

Paused at 19:20ish when I saw your DIY alignment set up, it will be at the least 2 degrees off on the toe once the suspension compresses.

Nice love them builds

Handling it as always!!

Milwaukees rock

TPS sensor my car did the same exact same thing with no check engine light once I hooked up to kpro I noticed tps wasn’t reading. Wire popped off.

My corolla 2zzge wouldnt go pass 2000 and i went to junk yard got a replacement Mass Air flow sensor. Swap and she fired up!!!! LETS GO!

car looks fire bro

Thoughts and prayers for that dog. Hahaha

Question that bypass hose on the back of the engine that is u shaped do u have a part number on that by chance

i was about to go sleep from my GY shift, then notification showed up... 😂 overtime😅

you mounted that crx like a pro

I got a question for you. I got a daily 97 ek automatic and I was wondering if I decide to boost it Just because you know any problems I will have or if the autos could handle it? Thanks.

So dont u put copper grease or Honda grease on the shaft for the release bearing?

If you from the tank there’s always sirens hahaha

Crazy to see you don’t adjust your clutch pedal at all when installing your action clutch. But they blamed me for my j series pressure plate breaking because I didn’t adjust it.

@kaybevang536

3 жыл бұрын

Do you have to adjust it a bit soft or it don’t matter ?

@mr._.gallardo

3 жыл бұрын

@@kaybevang536 action clutch sells J series clutches with the oem pressure plates, so they’re self adjusting. That’s what I don’t get. They’re idiots

@turbooodkrc3119

3 жыл бұрын

Action clutch is caca garbage

@kingskill6855

3 жыл бұрын

@@turbooodkrc3119 how is action clutch trash? I love my stage 3 clutch and I've beat the piss out my clutch for the past couple months and it still grabs like its new

What do u recommend for doing a quick release wheel been looking just not sure

Why did I not know that was super charged? I must have missed that build completely 😭

@Raindrops4891

3 жыл бұрын

for real that thing is wild

Is the intake manifold you got for crx an eBay one and are they good

Hey man, just curious what bearings you run in your engine cuz i got two k20s that need a rebuild and OEM main bearings are expensive as shit.

Can wait till krx gets back on the road

I recently picked up a wagon. Where do you get parts at it’s been hard to find the correct parts for them.

Bro love the use of the force to keep the shaft on the table. Some nice editing to get your ratchet back into your hand when you dropped it would have been sweet. Good video as always.

Dope

Nice man there's always something it never fails s mechanics job is never done

Bro do a video on fixing tge problem with your car. And congrats on action clutch for sponsoring you.

YO BRO BRO does cylinder 1 closest to the timing belt go to a7 on ecu for your dpi to mpfi swap?

was that a gm 3800 gxp supercharger?

Ok I went to the website and searched up the clutch it’s cool buuut how ever didn’t give me an opinion for a b20v motor and crv not in the list what do I do?

Cheee awesome vid brother keep up the awesome work. I remember weaksauce.org i use to order parts from there for my integra specially the function and form coil overs was a budget friendly set up back then 🤙🏽🤙🏽🤙🏽 #1OGHAWAIIFAM

Could it be the IACV?

7:55 me to bro me too :(

Hell yea boi 👊👊💪👍👊👊🤘🤘🤘

Is that a 1/4 Milwaukee Fuel impact your using?

How much you charge for k swap into eg

Bruh ✌🏼💥

Clutch looks the bees knees 👍🏻

HOW MUCH YOU CHARGE FOR K SWAP ON EG

Bro how can I get in touch with you I wanna go manual on my 98 Honda Civic and wan you to du the work.

Bro coming from a noise situation, my advise is that you go over and speak to them. More than likely they will comply, they will probably have a comeback with you making mechanic noice. But at least you can set terms.

@YoungStatic

3 жыл бұрын

My brother has. They can’t complain about “mechanic noise”. I’ve lived here all my life, they are in a family community garden. It’s not a kick back spot. They bbq everyday and slap music everyday. Not respecting the neighborhood. They’ve already smacked our cars a few time over the years because they leave drunk.

@JonathanGarcia-cy7hd

3 жыл бұрын

That sucks man, no dui is ever good. But I will say in Washington noise complaint hours are 8am-10pm. No matter what it is, music, yelling,”mechanic noise”, etc.

MAY THE FORCE BE WITH YOU!!! LOL!!

Like just for supercharger 0:30 no maaaaaames 🤤🤤

I need a honda

Hey bro looking for a crx to trade for my 99 ek hatch. It has h2b h22a4 b16 trans stage 2 crower cams type s pistons knife edge crank

Men bro you moster do mecany see all video you moster good jod want to know got my crv 2000 ex 4x4 5 speed need mavy like 3or 5 mont change the clutch my original do nothing yee only want to put headers thas it whatt clutch what clutch thing better for buy where can got good price good jod bro healp lot people see you video

link f or the catch can bro!

Freaking Noice

9:43 too much greese bro thats why i think it sliped love the content

MAF

I see young Static a click an like

Didn't you delete the iacv? Could be your issue

Would love to work with you

Damn I would of went to see wsup the that dog

Make it look ez

Ay

Damn never came to my mind but I wanna do a rally car EF Wagon 😂 or a lifted off road one

@DeadFront1319

3 жыл бұрын

Should go check out Dash-N-Cars after this. He’s pretty much done just that.

@kaybevang536

3 жыл бұрын

@Eric Lee Evo and Subaru guys : ***Confused Screaming ***

I order a clutch max for mine 🤷🏼‍♂️🤦🏼‍♂️😂 see how long the eBay shit will last lol. Stage 2 clutch for a b20b all motor should be okay🤔🤦🏼‍♂️🤣

I'm making my 98 civic lx a sleeper any mods ideas .thx

Jesus Christ himself,rex is clean as fuck.

Does your bro want to sell his awd civic wagon .im very interested

your force needs some work dude lol but you got

Let me know when u want to sell it 😍

put the car on the ground when doing your "alignment" and get some $40 toe plates.

5th

I want to k swap my ek so bad

Some of you guys think I don’t drink water I drink water everyday 😂 idk that was funny

Where's Joe at

Church your battery.

please let me know I'm stuck af right now

First.

Maybe the transmission is bad

YO IF YOUR BROTHER WANTS TO SELL THAT SUPERCHARGER ILL BUY IT CASH IN HAND..!!!

????????????????

Oh shit, warn us which brand clutch has the weak ass springs!