Achieving Zero Recovery Time: PRP vs. HSR
Ғылым және технология
PRP (Parallel Redundancy Protocol) and HSR (High-availability Seamless Redundancy), defined in IEC 62439-3, meet stringent requirements using packet duplication for uninterrupted data transmission. PRP uses two parallel networks, while HSR forms a ring topology, eliminating switch needs. Both protocols ensure zero recovery time.
This 12-minute video guides you through configuring PRP and HSR devices for zero packet loss using Moxa's DA-820C industrial computer and PT-G7728 switches with an embedded PRP/HSR module and RedBox. Learn to build redundancy topologies and enhance your network's reliability.
FOLLOW US:
LinkedIn: / moxa
Twitter: / moxainc
Facebook: / moxainc
Пікірлер: 4
In your example, you are using PT-G7728 for PRP Ring A, My question, can we use PT-7728 instead PT-G7728. how is the PTP complience on those 2 type switch. are both type are PTP complience switch.?. Thanks in advance for your respond
@moxainc
Ай бұрын
Hi @setiawanadi4388, thanks for reaching out. Only PT-7728-PTP models within the PT-7728 range support PRP/HSR when equipped with PM-7200-4GTX-PHR-PTP or PM-7200-4GSFP-PHR-PTP modules, and both PT-7728-PTP and PT-G7728 support IEEE 1588 hardware-based PTP.
Why a non-hsr device must use a redbox? Why it cant be connected to a hrs switch (like the others non hsr devices)?
@moxainc
4 ай бұрын
Hi @stringsandhamers, thanks for reaching out. Standard Ethernet devices can’t be connected directly to HSR ring because HSR modifies the frame and it can’t be processed correctly by a non-HSR node. To connect Singly Attached Nodes to HSR ring a Rebox or HSR switch should be used. HSR switch is essentially a combination of a switch and Redbox in a single unit, so from IEC standard point of view HSR switch is a multiport Rebox. The terms Redbox and HSR switch sometimes could be used interchangeably. If you have any questions about our products, feel free to contact a Moxa representative by completing the online form: www.moxa.com/en/contact-us