Ace 229V | VEX Robotics | Over Under Early Season Reveal
Our first bot of the 2023-2024 season ready for mall!
VRC Over Under Reveal
Follow us on Instagram!
ace.229v
#vexrobotics #vrc #overunder
Our first bot of the 2023-2024 season ready for mall!
VRC Over Under Reveal
Follow us on Instagram!
ace.229v
#vexrobotics #vrc #overunder
Пікірлер: 135
💰
👁️👁️ love the multi functionally on the skirts/wings, cata, and intake
Very nice, looking forward to seeing you at MOA! congrats!
ace robotics winning states, multiple sigs, and haevy contender for worlds this year
@madisoglrobotics
3 ай бұрын
foreshadow?
@eddo1569A
3 ай бұрын
@@madisoglrobotics B)
Mall ain’t ready for 229V
Yet another reason why North FL 🔛🔝
SO CLEAN 🔥🔥🔥
W robot 🔥🔥 Already looks crazy good
nice reveal. bot looking clean
Amazing song choice. 10/10
Butterfly effect WWW-also great robot -2654 driver
This is what bots at worlds will look like.
That was cleannnn
and here's the meta ladies and gentlemen
wow this is insane early season, 229V rocks 🔥🔥🔥
229 is the new 515 megateam just ya’ll wait
@RealKalebStephens
9 ай бұрын
They didn’t win every tournament they’ve been to though, Logan and Ben stand victorious
@HippityhoppityGnW
5 ай бұрын
@@RealKalebStephens “229V is the best team!” 9364H: Jk jk I love ace
Ace goes so hard
Sick robot😍
this is so fireeeeeeeeee
Ace too good 🔥
AAAAH ong this sweeps MOA
👀
See y’all at bisw ❤️
Ace = 🔥
This is winning the🗿sig event !!
We also using this meta design 😈
W meta right here
The solo works right?
Huge W’s ❤❤❤ ACE ROBOTICS
@shank7081
Жыл бұрын
wait is this vex U? cos i want to do the wings but im unsure if vrc are allowed to use plastic. btw if u couldnt tell alr its my first vex season
@GNG-cu3ww
Жыл бұрын
@@shank7081 hs team
@1028Z-Robotics
Жыл бұрын
@@shank7081 non shattering plastic is fine as long as you use under a 1' by 2' sheet of it
@shank7081
Жыл бұрын
@@1028Z-Robotics ok thanks, will also add sleds along with this
@shank7081
Жыл бұрын
@@GNG-cu3ww thanks
the most influencial bot this season 😍
ace 🔥🔥🔥
W
How many rubber bands did you use for the catapult? Trying to test perfect amount of them and running into problems. 1 on each side will snap slowly, and if I put too many the triball goes flying.
Nice design
aceeeeee ❤️❤️❤️
Sheeeeesh 🔥
This is the meta 🔥🔥🔥🔥
@727robotics
Ай бұрын
U sure
W song choice
diabolical
how many rubber bands are you using for the cata. 2 or 4?
ace op
Where’s the seal?
nice
Florida W
also this is going to be a 15k+ video you know
@eddo1569A
Жыл бұрын
this turned out to be a w comment
@mr.sir229v
Жыл бұрын
Correct
hi,how do you guys got the 400rpm on the drivetrain? like 74÷78*200rpm=300rpm
Hey what type of gloves you are using to match load triball?
This is an amazing pre season build. This is our first year doing vrc and I was wondering how you guys did the catapult system. What did yall use to pull the catapult down and release it so quickly?
@ringleaders10820A
11 ай бұрын
blrs wiki
@haydenford3794
11 ай бұрын
they used a slip gear which is a gear but is missing a portion of teeth
Hawt
Ace op 👀
This bot is insane! Nice job! Do you guys use 2 pneumatic pistons for the wings (one for each side) or just 1? Also, do you use pneumatics for the extension arm in the endgame? (I’m new to using pneumatics lol)
@ltcrobotics6271
Жыл бұрын
Pay attention to their specs at the end
Hi! You guys have a really nice robot. I was wondering how you guys made the catapult have both a high and low arc.
@sunkensplashgaming1884
Жыл бұрын
if we load into the catapult directly, it has a high arc, if we place it on the delrin that says WNA? the standoffs on the catapult will act as a puncher and give it a low arc
what is your specifications? Just asking
How do you get the different arcs on the slapper
Catapult explanation pls Great robot🔥🔥🔥
♠️🔛🔝
Did you guys use a ratchet on the cata?
Glad to see other teams doing this. First saw this on 62A a while ago. Great job, Great video.
Great bot, did you use pneumatics to expand and contract the intake part?
@sunkensplashgaming1884
11 ай бұрын
yes the intake is on 2 dual acting pneumatics
fire robot!!!! are you able to change the sec during the match, or is it the placement of the tribal within ur cata? 🔥🔥🔥
@mr.sir229v
Жыл бұрын
The arc depends on where we place the Triball when match loading.
@landonvo3098
Жыл бұрын
@mr.sir229v how do you make the cata have 2 arcs?
@mr.sir229v
Жыл бұрын
@@landonvo3098we are able to either place the match load into the catapult where it will shoot with high arc or on top of the catapult tower where it is “slapped” with 2 standoffs that are on our catapult arm in order to achieve a lower arc.
@landonvo3098
Жыл бұрын
@mr.sir229v Oh okay thanks
looks great but what's has it got for the climbing?
@mr.sir229v
Жыл бұрын
At 0:28 you can see our hang where we balance on the barrier.
What’s the purpose of the pneumatic intake? Is it just to make a flat surface for the wings? Btw, congrats on winning excellence at MOA
@229member
Жыл бұрын
It makes scoring the triballs alot smoother and more consistent and it is also for the flat surface with the wings
Hey, new to vrc this year, what did you guys use as a catapult stopper?
@sunkensplashgaming1884
10 ай бұрын
we use cut up traction wheel tires
how did you proggram your pnumatics
Very impressive robot. I was just wondering what the gear ratio on the Cata was?
@229member
11 ай бұрын
72:24 100rpm motor cart
@alexmendoza1874
11 ай бұрын
@@229memberhow many rubber bands did you use total?
does the piston for the wings move when activated? Excellent robot!
@sunkensplashgaming1884
11 ай бұрын
we have buttons to control the wings on the controller if that's what you're asking, there are 2 dual acting pneumatics that move the wings and they are independently controlled so we can move both or just one if we want
@williemedicog2163
11 ай бұрын
@@sunkensplashgaming1884 Im wondering if the pistions themselves rotate on a pivot when activated
@sunkensplashgaming1884
11 ай бұрын
@@williemedicog2163 yes, they pivot on the chassis and on the wings to create the motion
@williemedicog2163
11 ай бұрын
@@sunkensplashgaming1884 ok, thank you
Very impressive cata! Whats the wattage on it?
@229member
11 ай бұрын
11w
This build is actually insane for so early in the season. Can’t wait to compete with/against you guys at MOA -8823Z
@229member
Жыл бұрын
Thank you! See you at MOA!
how does your cata function does it use a ratchet
@sunkensplashgaming1884
Жыл бұрын
yes we have a ratchet and we use a rotation sensor to know the angle it's at
is that a 2 driveshaft cata or a 3 driveshaft cata?
@jadynhasstupid2275
11 ай бұрын
2
what is the gear ratio of the wheels
@sunkensplashgaming1884
Жыл бұрын
400 rpm 72:48 on 3.25" omnis
How do you swap between ow and high arc
@o.......l489
Жыл бұрын
oh nvm I see it now
what is the gearing on your cata
@sunkensplashgaming1884
10 ай бұрын
it is 24 on the motor shaft to 72 on the cata arm
Nice robot! However for your guys' intake, I would switch to flex wheels instead of rubber bands as with rubber bands its really easy for them to get tangled with other robots and break.
@Cayden675A
Жыл бұрын
Flex wheels are really heavy you can just cover the bands with a anti slip mat.
@connorm_3605
Жыл бұрын
Lmao robots used rubber band roller intakes all throughout TP despite the entanglement risks so I think they should be fine here
nice robot man, what wheels do you use and how many?
@eagle941_official8
11 ай бұрын
6 wheel, 3.25 in, 400 rpm i believe
@229member
11 ай бұрын
That would be correct@@eagle941_official8
@crie1808x
11 ай бұрын
@@229membercool thanks, that’s what I thought too but I was skeptical if 3.25 wheels could go over the barrier well ig it works 😄
Cad?
No climbing you going to add
Isn't the sweeping mechanism not allowed because your only allowed to possess one triball?
@mr.sir229v
Жыл бұрын
Pushing with a flat surface is not considered possession according to the game manual.
@Livewire1
Жыл бұрын
@@mr.sir229v cool
@Diam0nder
Жыл бұрын
just adding on that the rule in spin up. was as long as its not a concave surface u should be good
well im screwed
Wait so when you like expand to the sides to puch a lot in, isnt that a violation?
@sunkensplashgaming1884
11 ай бұрын
nope, our wings fold out and create a flat surface on the front, pushing with flat surfaces is not considered possession because the triballs don't turn with your robot so you can push as many as you want
Please ace I pray that you will make an explanation video
@leo77774v
10 ай бұрын
I agree with this dude for some reason
Can you send me your blueprints?
monk
pair with us at mall ❤
@mr.sir229v
Жыл бұрын
Team #?
@alexmerceline3100
Жыл бұрын
@@mr.sir229v 1687c we post a vid in vex cad of our shooting if u wanna see
kinda mid