Specifications
Power output: 70 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.1%
Damping factor: 50
Input sensitivity: 1V
Signal to noise ratio: 100dB
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 1 x IC, 60 x transistors, 44 x diodes
Dimensions: 482 x 150 x 353mm
Weight: 23.5kg
The circuit configuration employs a push-pull circuit in all stages, with less phase disturbance over a wide bandwidth and excellent linearity over a wide dynamic range.
In addition, in order to keep residual noise low, specially selected parts and careful circuit examination are carried out, and residual noise is reduced to the extent that it can hardly be heard even when it is directly connected to a high-efficiency horn driver as a multi-channel amplifier system.
It is equipped with a subsonic filter to cut unwanted noise in the ultra-low range. Equipped with a detent type attenuator that changes in 1 dB steps up to -20dB.