There are many ways to do an ABS delete and custom brake lines on these vehicles but here is how I did it! All the parts along with tools are listed below. The approximate cost is less than $300. I hope this is helpful to and if y'all have any questions or critiques let me know!
REAR:
Pegasus 3265-39 M12x1.5 inverted flare to -3an male flare
All star Performance ALL46304-12 12” braided steel line with -3 ends
Chase Bays CB-FEMF -3AN Male to (2) M10x1.0
Convex Female F Fitting
FRONT:
Pegasus 3265-41 M14x1.5 inverted flare to -4an male flare
All star performance ALL46404-20 20” #4 AN brake line
4AN AN4 Male Flare to 1/8 NPT Pipe Male Stainless Steel Brake Hose Fitting Adapter Union Connector,Brake and Clutch Adapter Fitting
amzn.to/4f1izP0
Biondo LL: Line Lock/Roll Control Solenoid - JEGS Part Number 376-LL
Dorman 785-436D Brake Line Tee - inverted flare - 3/16"
Anderson Metals Brass tube fitting 3/16" compression x 1/8" male pipe
amzn.to/3yeXSOW
The Stop Shop 25 Feet of 3/16 Copper Nickel Brake line with fittings
amzn.to/3LxvkU5
4LIFETIMELINES- 3/16" Metric Fitting Assortment Kit
amzn.to/467cBbv
LordHardware 200pcs Copper Crush Washers
amzn.to/3Y5mNPL
TOOLS:
Wostore Double Flaring Tool Kit
amzn.to/3SfRUUR
Capri Tools Tube Bender, 1/8
amzn.to/3y6SYUj
Also need about 32 oz of new DOT 3 brake fluid and Teflon tape.