ABANDONED Muscle Car Revival! First Start in 35 years! -- Part 3
Автокөліктер мен көлік құралдары
Part 3 of our 8 part camping adventure where we revived this 1970 Satellite in 5 long, hot, and epic days! On this episode we change starters, battle ignition issues, change starters, finally fire the engine, and then change starters again! Stay tuned for some amazing obstacles that we over come with a bit of skill and a lot of luck!!
Part 1: • ABANDONED Muscle Car R...
Part 2: • ABANDONED Muscle Car R...
PART 4 IS ON THUNDERHEAD289's CHANNEL: • ABANDONED Muscle Car R...
Check out the full range of Teng Tools tool kits:
t2m.io/JYDSat3
#FIRSTSTART #SATELLITE #REVIVAL
----------------------------------------------------------
Follow the gang!
Thunderhead289:
/ @thunderhead289
Dylan McCool:
/ @dylanmccoolvideo
Classicmustang429:
/ @theoldcarchannel.
Deboss Garage:
/ @debossgarage
Junkyard Mook:
/ @junkyardmook
Whack-it Garage:
/ @vicegripgarage
Contact Kevin:
junkyarddigs1@gmail.com
Instagram:
/ junkyard_digs
#satellite #junkyarddigs #revival
Пікірлер: 754
Hey guys just a reminder, Luke and I both work full time jobs and a video takes a minimum of 20 hours to edit and upload, so thats why each episode is exactly 2 weeks apart. Enjoy😎🤘
@niels7643
4 жыл бұрын
Definately enjoying the roadtrip/revival series!
@AL-ud2is
4 жыл бұрын
it's worth the wait :) thank you
@ottepedersen9219
4 жыл бұрын
Don’t mind waiting at all
@mig25foxbat
4 жыл бұрын
Hope you didn’t take my comment on the previous teaser as belittling the amount of work that goes into these, i just really enjoy the videos and am impatient for the next one!!
@E4EonEbay
4 жыл бұрын
I hope someday THIS can be your full time gig as it appears to be something you both are passionate about! Lord knows there plenty of rigs out there just waiting to be revived and it appears you have a solid audience hungry for content. Keep up the good work!
Kev - sprays "starter fluid" on starter... Luke: did it work? Kev: no... this. is why i'm here.
@captainargos8457
4 жыл бұрын
c. Cc c c 😮😋😋👂🏿✍🏿👂🏿👃🏿👂🏿👃🏿💟😉✍🏿👃🏿😠😠💩👺✍🏿👥🈸😤😤🈸😤🈸🈸🈸☪😤🇻🇦Drew Fausett
@darthhaul58
4 жыл бұрын
Like these guys need to give some 'mechanics' ideas
@nashbeniuk6104
2 жыл бұрын
Love it
@PrinceWesterburg
2 жыл бұрын
I loved the spontaneity of that too!
can we get a shoutout to his brother for filming? Usually people have trouble focusing the camera but this is crisp!
@JunkyardDigs
4 жыл бұрын
Lumix auto focus does wonders, but yes were super appreciative of Jesse filming🤘
@rupe53
4 жыл бұрын
@@JunkyardDigs … does anyone still use film?
@10mmfan
4 жыл бұрын
Brother you always do a fantastic job filming. You have a real talent for keeping it it steady and getting good angles. Kudos to you.
@daveb6386
4 жыл бұрын
I was thinking the same thing. There’s three of them there during this project. As always, another great video from you guys!
@raoulcruz4404
4 жыл бұрын
Camera guy doing a great job. A lot of handheld video looks like the camera is suspended by a bungee cord. The camera is swinging side to side. Or they’re jerking the zoom all the time.
11:15 This harkens back to part 4 of the F250 revival. Luke: "ya ever think that we're stupid?" Kevin: "All the time...."
@ricktretheway7947
4 жыл бұрын
Get someone that knows what they are doing. Talk about bush mechanics.
"Who puts a starter on this side of the car when theres nothing over here?" *engineers*
New title for this series “Two ford guys work to get a mopar started when their mopar guy is at work”
@ThunderHead289
4 жыл бұрын
Dylan Kane two ford guys make a mopar better than it ever was
@PoorBoyzPulling
4 жыл бұрын
I don’t think Mr. McCool is going to be happy with that statement.
@DylanMcCoolVideo
4 жыл бұрын
ThunderHead289 Unsubscribed.
Kudos to your brother on his filming skills. He does a fantastic job!
Thanks Luke for showing how to check a coil when it's on the engine. I'd never thought of that before.
Every time I see a Plymouth Satellite I think of the B-52s Song "Planet Claire"....."She drove a Plymouth Satellite....Faster than the Speed of Light!"
Just an FYI - mopars run the starter on the driver's side due to the offset of the engine to the passenger side - engineers believed there was more room on the driver's side because of this - also remember you're working on a column shift manual car which was actually relatively uncommon - most column manual cars were slant 6 engines with WAY more room. Glad to see the old gal light off - glad you explained that timing trick for some of the viewers - -
I love it when thunderhead joins the crew! Two car minds, better than mine!
It's been bugging me all night long... It finally hit me on who you two make me think of... Bo and Duke Luke.
Jesse has really done a nice job filming these episodes! Really enjoy the uploads, surely takes immense effort working the daily grind as well! Thank you guys!
I really enjoy watching you guys working together. It's educational and entertaining at the same time! Keep up the great work!
@Junkyard Digs - Tip for finding #1 cylinder, when looking at the offset of the heads the cylinder protruding forward the most is always #1
Great job, the cameraman got the perfect angles, I'm learning a lot from you guys, and thanks for sharing another informative video. Please bring the "Mook" back for the next video and send it!!!
You guys are awesome . You 2 , Dylan McCool and Vice Grip Garage are the best . Keep the videos coming . Much respect from Louisville Ky .
Reverend Keverend delivers! Glory be!
Something worth remembering too is that an old or worn starter will pull the battery voltage down low enough so that the ballast resistor which normally drops 13.8 to 8 ish volts with good current to 10 or less volts to nothing when cranking hence No Spark. I ALWAYS hotwire both the ignition and start to the battery when im playing with unknown quantity cars or you just end up chasing ghosts. Love your work Fellas
LOVE YOU GUYS....I REALLY LEARN A LOT WITH YOU TWO..KEEP UP THE GOOD WORK
"Let's just take the spacer off before it gets too hot". Proceeds to turn into a bonfire.
My dad and I watched part one and two together but part three he'll be watching from heaven.he loved your guys channels.keep up the good work
@JunkyardDigs
4 жыл бұрын
Well part 4 goes out to him, I bet he was a great man. Thank you for watching
@nmattcar
4 жыл бұрын
@@JunkyardDigs he was faught in Vietnam.showed me everything I needed to know supported me through my mistakes.thank you for the videos
Nice technique with the timing and advancement with spark plug
Love watching this video. Had a 1970 Belvidere back in the day. Could always buy cheap parts at junkyards and get it up and running. That 318 was bulletproof and light. Up north, the rust ate these unibody cars up fast. When working on the brakes, we jacked the front up then had to wait an hour before the doors lined up to close em, lol. Loved that car and got many offers for it even in rough condition.
The campfire has an electrical problem.
Look before trying to revive a muscle car. Make a check list of things you need and go buy them. Replace the items that should be replaced. Drain the old oil and take the valve covers off. Reset valves. Pour oil over them. Change oil filter. Fill oil with the right grade and weight. Drain anti freeze replace thermostat. Plugs, Plug wires, pump out old gas, replace with fresh gas, replace fuel filter. Check trans fluid and put the right fluid in it to the right level. Buy new battery to have the power to start the engine. When your ready to try. Rebuild carb. Because these old carb's are full of crap. The gaskets and floats are shot. New cap and rotor and points or file the old ones. Check the rearend fluid and change with right rear gear oil. Last if the engine is good and running then check and replace brake pads rotor and drums. Don't take the chance that a master cylinder is bad and trash a good old muscle car because your cheap or lazy. If this car is a good candidate to be brought back to life. Check it over before even trying to revive or it's worth the time or money. If you can't afford to bring it back to life. Sell it to someone who can. Sooner or later these relics will run out. We should try and save a car era that means so much to the Baby Boomers. Shawn
Enjoy all of your videos. Keep them coming...many thanks for the time and effort you and Luke put into your projects.
Love these guys glad to be here
Damn the front end on that thing is so bad ass
I grew up a couple hours south in rural northeast MO. These guys act exactly like all the my friends did growing up. Makes me kind of miss that place.
I love this channel! It feels like I'm there with you guys screwing around. Greetings from Norway!😊
Great job. Thank you for sharing every step you guys are taking.
Always drop the oil. Water settles to the bottom, won't necessarily show on the dipstick. On startup water goes to the bearings and people say "aww man, I guess it was parked because of a rod knock." Oil is what? $12
@marklewis9480
4 жыл бұрын
I say its stopped cuz a bearing got hot.
@nbowling10trio
4 жыл бұрын
I agree, never start an engine that sat more than six months without fresh oil
@stanlee7635
4 жыл бұрын
Say Whut? Or it was low on oil and full of water. How’s that rocket flying now?
@andreww3278
4 жыл бұрын
Maybe $12 when that car was in the showroom. It's like $8 a quart nowadays.
@stillshot2
4 жыл бұрын
@@andreww3278 You're overpaying, I get full synthetic valvoline for $5 a quart
This series just keeps getting better! Some of the stuff you are doing I have never seen done before. #SKETCH
Great tips on setting the timing and old vehicle first start.
you guys are very entertaining and super-intelligent about internal combustion engines. Those engineering degrees were not a waste of time. My son completed his electrical eng. literally this week and he's saved me & some of my buddies during our projects many times.
Thanks for sharing! Great video as always!
“When over here you have… NOTHIN” best thing I’ve ever seen, that face 😂
I really enjoy doing this stuff and it's a lot of fun watching you guys doing an old start. fun and relaxing and it takes your mind off other things.
I like watching older cars getting revived.. How 😎 keep up the good work guy's... Oklahoma
JYD, I started watching your newest videos and fell in love with the channel. Now I am watching the older ones, you look so different! Thanks for the great content!
This was the first revival video i ever saw, thankyou for the inspiration
I just happened upon your videos of the f250 and I am enjoying your restoration of these old cars.
I am learning a lot from the video....it's funny and silly sometimes but I am learning about engines and that's great. Thanks. I am glad you are making these videos.
Great job on getting it running. Another great video 👍
LOL that "suck" on it was a master card moment the look on you guys faces lol keep up the good work 👍
Good job
of course the starter would be a hangup...it's always something. Loving the vids tho guys!
Kevin the Videos are great when you have Luke with you! Your little bro is cool!
Wow iam so happy in part3 finally the car is started
Got to love them remanufactured parts!😂😂
Well time to get back to work on my 64 Buick Wildcat 4Door hardtop ex Rcmp interceptor 😎👍👍 Can’t wait to see the next episode guyz😎👍👍
Great Content Guys Thanks👍
My fathers first car was a 70 satelite and was the car I was brought home from the hospital in. My earliest memories involved that car. Unfortunately I believe his car was sold several times and ended up in the crusher. Great videos guys save these pieces of history before they are lost forever
Looking forward to see it drive!
Single ballast mopars don't power the coil while cranking. Put a jumper relay on the starter relay to provide power to the ballast resistor when the starter relay is energized. It makes them start a lot faster. Also, the distributor is keyed, not geared, so you can pull it out to set the points. It will eiher be right, or 180 off when you put it back. Cheers!
Man...that's an oldschool Chrysler starter for sure. Loving the grinding marbles as it winds down after the bendix drive disengages. As kid we used to pick out and guess the car just by the sound of the starter. Chrysler products were unique to say the least.
When your cleaning your contact points use an emery board it works great.
First thing I check when maybe bring an old sitter back to life is pressure testing the cooling system to listen for bubbles, hisses and of course any squirting. Then is carb totaly gummed and then some oil in the jugs.
Thank you for putting a ministarter in it. So many people dont do this.
Thanks for filming
Hey boys, love what you're doing with the series. Keep it up my guy.
Those cars were awesome . so easy to start and looked great .
What great guys to hang out with
You'd love the brake bleeders on my 74 GMC Sierra. Fronts are 3/8ths, back brake bleeders are 10mm... So at least I know the rear brakes have been serviced at some point.
Nice you fellas looked like your having fun love it 😊
You guys have way too much fun. You guys crack me up.
Absolutely love your videos you can learn alot
i subscribed to 289 soon as you mentioned it in this video good thing you mentioned it . You guy's are the best...
Love both of you Channels guys you'll get it man you always do 👍
Let's just take the spacer off before it gets too hot AAAAAAAAAAGGHHHHH! :O LMMFAO
You boys are national treasures.
Luke you have the patience of Job (you know....from the Bible). It’s great to see young men with such knowledge and interest in classic cars and you have fun with it. That’s why I watch every video you guys make.
19:42 lol I've never heard of a engine doing that.
On the timing, I use a test light hooked to points . Set timing mark to 12 degrees btdc. Turn dizzy, when the light goes off I know that's when to try to start engine. Works every time.
@JunkyardDigs
4 жыл бұрын
Same concept but we used a spark plug 🤘
@claudeladow2334
4 жыл бұрын
@@JunkyardDigs exactly.
I put a 401 nailhead in 65 GMC 3/4 ton pickup.it used to have a 305 v -6.it would wrinkle 10.16.5 10 ply tires. Quite the beast.
Ahh!! I don't have time to watch right now. Already liked it, cause I know I'll love it
i Honor you guess i appreciate what you are doing to help others ..bro love!! 👇
Hey Guys! What a fun series. Great video. I'm really enjoying this. You guys bring a lot of fun to this. Best of all things to you and your's. Great job.
My brother built a nice 350 Chevy and couldn't get it running. He was driving a Pontiac at the time. I was home on leave from the navy and took a look at it. He had timed it like it was a Pontiac, so I timed it and redid the firing order on the distributor. When he got home I said let's go go check out the 47. Which he had put the engine in. Popped the hood hooked up the battery and it fired right up. He said he knew what the problem was all along.b.s.
Very cool to hear it run, you guys are a great team!
I apologize gentlemen. I have watched up till episode 3 of this series only now subscribed to both of your channels! My bad! Thank you both for what you do!
Part III sweet!
Hey guys I really enjoy your videos and I do enjoy the old engine's fire up
Great video, as always. I love what you guys are going!
Oh yes! I love this thing
Does anyone even like Mopar?
@johnhicks1969
4 жыл бұрын
Mopar or no car for me . Dylan if you were there you guys would already be doing donuts and burn outs
@grandprix834bbl
4 жыл бұрын
Love mopar. But own gm cause parts are cheaper
@maddadd1
4 жыл бұрын
only smart people
@mikeobrien3744
4 жыл бұрын
Best Mopar ever...Blasphemi.
@velladune1
4 жыл бұрын
I love'em. Not sure why they even bothered with it. All they are doing is trash talking it the whole time. I don't see their point other then just trying to get it running.
21:37 killed me
Fun watch as always! Need to start using Shell Rotella T4 or regular Rotella 10w30 or 15w40. Need that Zinc and ZDDP for these old motors! Keep up the great content! 💜🤘
dude i love your guys videos
21:27 you went full Nicolas Cage right there. LOL
good work!
I always thought the Chrysler starters were slow and had a unique sound
@jrnymn14
4 жыл бұрын
Cause they were a gear reduction, sorta like a worm drive
@packingten
4 жыл бұрын
Wow your brilliant..
@lovetocrank
2 жыл бұрын
I always have loved that sound!
Love the vise grip garage hat
u dudes are awesome!!!!!!!!!!!!!!!! great job keep doin more revivals.
I daily drove a 1952 Chevy and will soon be in a 1940 Chevy. You guys make me want to save up for a junker so I can learn to do this stuff myself instead of paying someone else to,
I love how with the 3 of you, one prefers mopars, one GM, the other ford
Come on baby, first engine start up!!!
Great video Guys
It is a Mopar so what do you expect??? All kidding aside, it has been fun seeing this old car slowly come back to life. Keep it up even if it is not a Ford.