Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

I've got the 2500 one. I bought it one year ago. It works like a charm. One of my best purchases ever. Strongly recommended.

@joyisamazingyeah08

5 жыл бұрын

MIght it cut through cardboard?

@maksxymilian713

4 жыл бұрын

Hello, its still working?

@pratikjambotkar4626

4 жыл бұрын

Hi can it 2.5w cut white foam board

Finaly! A good review!

I have the same laser as you, the problem that you are having with the lines is becauseYou need to tighten the motor bands, also it seems that the capacitors that the laser haves are not enough and then sometimes the laser lose power, to avoid that you can pause the laser after 1 or 2 minutes of work so the capacitors can refill again, you can use a keyboard/mouse control program to do that automatically. the other way is to use less power in your laser and move the motors slowly

@NexiTech

7 жыл бұрын

animes25 Thanks Mate! Tightening belts solved problem! Cheers!

@punitsharma1204

4 жыл бұрын

I want to buy it....i m not getting the link...can anyone share the direct link

good assy video.time lapse and gopro view is great and good volume on music....only 6 min in and I subbed.... hope to see alot more from your channel. I also noted you reply quick to comments.... LIKE!

My next purchase.......great video

@NexiTech

6 жыл бұрын

TEMPUS MORIENDI Thank you :)

thank you for sharing , good presentation

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

Great video...I have been thinking about getting one of these...Now, I know I will...My thanks to the gent that made it.

I like the music in this video!

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

But where to find the software for Mac OS ....thanks

Very Nice! Thank You!

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

Awesome ! Great Review :)

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

Planning to make one with similar material, but larger, about 1mx1m. It is not difficult, and cheaper

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

Thanks for posting good review vid 👍😎 Will this cut depron sheet nicely?

Thank you for this video! Very helpful! Can you post a link for Benbox Driver and the directions you used to assemble? Thank you!

Hi Nexi tech, is this machine can engrave curve surface? like a coconut surface, thanks

Hey I'm doing a uni project in which I'm required to etch/engrave onto the surface of a pre-made box. I was wondering if this laser cutter could engrave onto a box about 13cm deep if I set it up higher than the box on another stand? Thanks:)

I'd like to see what its lilke engraving a wooden pen...could you do this?

I bought a laser cutter, only a small a4 one to start with, and I spent a whole day fiddling around trying to flash Grbl and get the steps/mm correct. I nearly bashed it against a wall but I held back and succeeded

@rakeshjadhav9238

5 жыл бұрын

From where you got A4 ?

@nxvasix8696

5 жыл бұрын

RAKESH JADHAV got my 2.5W A4 laser cutter off eBay for around £90

Hello! Can you tell if it is possible to change the head from laser to drawing head to work with pan of marker?

Hey, thanks for the video. I noticed you have a MacBook Air, what software are you using for Mac?

Hi - excellent video thanks -question- would it accurately cut fairly intricate spray stencils? the material is acetate (plastic) sheet, less than 1mm thick? thanks

so if it says complete unit without lazer module it means i have to some how get that too, and will it do plastic , and if how thick,, (talking about this specific model

hello i am curious can this machine engrave a plastic magazine like for a m4 etc.? i only saw you do something that is thin in size. the magazine sits about an inch high when laying down would this be an issue?

Please what is the wavelength? Thank you for sharing.

Awesome video on installation and testing. This video has got me much closer to making a purchase, so thank you! A few questions. 1) What thickness of wood did you do the Eiffel Tower on? 2) Does it actually cut into the wood or just burning the top surface black? 3) How long did it take to do the Eiffel Tower? And what size is it? My art is similar style Thanks!

Hi. Is your A3 5.5W adequate for cutting 1" foam? Would you recommend more or less power? Thanks.

what software do you use? I have seen the benbox and the eleskcam software and have even heard of some better software you can purchase. I am just wondering what is the best software out there to get the best results.

Hi .. is the re Andy specific formato to use it?

can you please tell me does this machine use for fabric cutting like polyester or cotton.

Hi. You are using the needed software with Bootcamp or a Virtual Machine? Do you think it is possible to use this software native on OS X? Regards

Do you think I can engrave on stones with this machine? Thank you

that laser can cut fabric canvas?

finally a english version i been looking

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

Hello , i have Eleksmaker A3 pro ,do i need to calibrate the machine? I have installed the program, I choοse the COM and the machine. , what do button set home and home? I can move the laser manually, but when I select the photo while it shows to the computer that it reads the design it does not move the laser at all. Could you help me? Thank you

Did yours come with assembly instructions

how are you running elekscam on your Mac???

Hello Nexi, can we customize the region of the laser up to 1000x1000 mm, and is it compatible with the software to cover up the 1000x1000 mm region? What type of picture format that the software can process ? Thank you

Is there any place I could download the laseraxe software online? I lost my software CD.

Hi, which program do you use in mac? does it works with laseraxe?

Hi Nexi Tech. I was wondering if you could tell me, if I buy a similar 500mw laser kit, and a separate 5500mw laser, would i be able to swap the laser out without any extra equipment. Both are 12v, can you think of anything else I might need or should it be as easy as a straight swap?

super . gracias por el video donde se puede comprar el set un saludo en australia vivo melbourne

How did you put the frame together?? i cant seem to be able to do it w mine

what control program do you use? Any g code source porgram?

Sir, please make a video for making a stamp with that laser machine.

Hi, congratulations for the video, you think you can cut expanded polystyrene?

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

Great video.. Does the laser lose any engraving power if height is extended over an object? I want to engrave wood object that cannot fit in engrave area, without raising the engraver. Thanks.

@NexiTech

6 жыл бұрын

Andre Jacobs Well you have to have flat object and laser in focus to be able to engrave precisely and even. For example if you will engrave round(ball) object laser will go out of focus down the curve and it might not engrave at some spots at all or very week You can add more power but then on areas where laser is in foxus it will burn it way to much then on non focus places. I hope i explained it right.

i wonder if one can make silk screen stensil using this laser. Can it be programmed to punch microholes in a suitable material? it could eliminate having to use emulsion and burn masters?

Can it cut acrylic. And upto what thickness? Please do a video on cutting different materials.

I think you could exchange the extruder with a laser, then you could laser engrave with your 3d printer

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

I wonder if this could cut eva foam up to 10mm?

Nice unit, I'm looking forward to getting one, the main use would be to cut 5mm white foamboard, have you done any test with this material? I would like to know if it would do a nice straight cut, without melting the foam away under the paper layer. Also, are you able to control the power of the laser, so you can either cut & engrave on the same process?

@curtisbrown2667

6 жыл бұрын

This laser has cut everything I've thrown at it with the exception of some metals. The power level can be adjusted and you can also increase the speed of the laser so its not in one place for too long. Just make sure you have extra materials because you will need some to practice on.

Hello, I bought a car with a le 5040 field. installed everything, but the native program on a large field, gives only a small picture. I want to make a big one. What program do I need to increase. thanks

how thick is the plexiglas from which the pieces are made?

Hey, nice video. Would i need anything more than a US to EU plug changer for this to work in Europe? Would i need a voltage converter to?

@NexiTech

7 жыл бұрын

Thanks mate! The main power to the whole Laser engraver is Adapter with Output DC 12V 5A and on back on adapter is label saying input AC 100-240V so you can go easy with EU plug and save money. :) Use provide links in video description and coupon to save even more money :) You will get better price. Good luck with your Laser.

@jerome100killer5

6 жыл бұрын

Wondering if you can help me with a similar machine if possible

Hola podria hacer un video cortando algun material?

What did you do to fix the dragon? Also I would have loved to see the software setup.

@NexiTech

5 жыл бұрын

3D Printwiz Belts was loose.

How do I install the software if I have a Mac???

Will this thing cut 3mm Acrylic?

Hi does this machine cut thin wood? Or isit only used for laser engraver? Thank you for sharing

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

What camera do you use to make the video? Thanks!

@NexiTech

7 жыл бұрын

Assembly video is done with AZ1VR Action Cam and rest of video is record with Samsung S7 edge with advanced camera settings. Lights is 4 neon standard lights 36W mount on ceiling. I could take everything in 4K but video editing takes ages. :D

yo, Nexi, i have the machine, and the 2500mw module bought separately. the module has only 2 cables, positive and negative. and the machine has 3 cables to connect. so, how do you connect the module, man? i am stuck. help me, man

Friend ... I was trying to use the program to test my 550mw laser cutter and the laser light went on ... I hit a metal bar and the room lit ... I did not see it directly but I could feel the blue light ... do you think he hurt me? I did not have the glasses on ... it was only an instant and I know that it takes a millisecond to hurt ... I'm afraid that it hurt me.

Can this unit cut 1/8” Balsa wood? If so about how fast? How about thin modeling plywood? Thanks

@XxTWMLxX

4 жыл бұрын

Balsa may need 2-3 passes with 2.5w laser. 5.5 should do in 1-2 passes. Up to 1/4 plywood cuts in 3-5 passes usually. It won't do it in one go. It's an engraver not technically a cutter. But can do it

Is this same machine compatible for both the European and American electric system?

can it etch glass?

Distance between laser and processing surface?

can it cut regular WOVEN fabric? how about printing on it? with ink? can I put something under a transparency for it to cut the transparency? Can I upload my own pictures on a jpg, png or PDF? thxs

Did someone managed to load DFX files into the Vigo software ?

I bought a 7000 or a 7 watt engraver, is it powerful enough to cut thin wood? I'm just a beginner at this. The only one's I see demonstrated are the 2.5's and the 5's. Also does anyone know what the best software to use is? I'm not too crazy about eleks software.

If I want to add an additional fan to cool the area hit by the laser beam, what type of fan do I buy? And, for support, is there anything in Thingiverse?

Nice!! Can you send me EleksCam software? I can't download from de official page! Thanks!!

Hello. Can you give the list of equipments(things i need) to make laser engraver machine?

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

I am interested to build this one.. Where can I get the mounting acrylic parts..

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

Quanto custa essa máquina e onde consigo aqui no Brasil?

excuse me, i looking for one machine like this but more bigger like 100cm×200cm, it's possible or not ? thank you

Bang klo buat cutting poly foam bisa gak

hi how is it work on plexiglass ?

Where can I download software for this engraver?

mine does not control the laser :( its got an off/on switch ontop but the software control does not work..

@NexiTech

7 жыл бұрын

The Hot End - 3D Printing & Technology Look for the buttons on top of laser module. Find right combination and it will be accepted in software. Practically you need to click on each button couple times until you turn laser off or swich it to low power mode then you flash it using provide software and then try to turn off or on laser using software.

@anthonymartin3405

7 жыл бұрын

Theres only 1 button, low power mode - tried it both off and on and reflashed software. I think the arduino nano is dead/faulty as the pin does not switch voltage when software is telling laser to be on or off

Hi, thanks for the video. will this laser drill 1mm holes in wood, have you triued, if not can you ?

@joeblogs4146

4 жыл бұрын

I was going to order one like this off Amazon from gear best only to get told it would take longer to arrive than they claim ?3 months) IS THIS TRUE "any advice" on this information I've been told by a third party Oh! and the import duty will amount to more the the whole system is actually worth is something else I've also been told. Thanks for the video it will certainly help many people out there.👍👍

good video. Thanks. What is the name of the program and where can I download it? I have the same but bigger

Hi, this is a good video!! I'm looking for a laser cutter and I need some advice. Would a 3000 mW laser (3W) be enough to cut through fabric? Does anyone have any experience in this? Thank you very much!!!

@curtisbrown2667

6 жыл бұрын

That depends on the fabric (like if its fire retardant) but a 3000mw should be plenty for it. If it doesn't make a cut on the first pass, try slowing down the speed of the laser and increasing it's passes. Eventually the laser will cut it.

@amrithMilW

6 жыл бұрын

Same requirement for me as well. These are chinese machine rebranded. Looking to buy one for my factory purpose to cut fabric. I have the same question which laser should I buy to cut polyester. But considering the fact even 500mW will also do I think.

@curtisbrown2667

6 жыл бұрын

Correct. Laser cutting fabric doesn't require a high powered laser at all. just make sure the work area of the machine is large enough for what you're trying to accomplish.

What instructions are you looking at? just the pic of the machine? id like better instructions if you have a good source. thanks!

@rayalbertgonzalez6498

5 жыл бұрын

I had to put mine together using the photos of the unit from the Amazon pictures. It was a real pain. It took me about 4 hours. I also wish they had instructions included. I'd think that it would be nice to add the instructions on how to put these things together. Good luck friend.

A lot of people make their own custom dice. Can you engrave on acrylic dice?

What kind of software is supported? It support "ai" (illustrator) or something from vectorial files?

@Tuffenough4u

5 жыл бұрын

It likely uses SVG format with upto 300DPI. That being said, any vector software should work fine if the export is correctly scaled and set to RGB. Inkscape is highly popular since it's cheap. But I prefer using corel over all others.

Hello.. Can you possibly tell me what software you are using for engraver please..

Good

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

corta madera mdf de 3 mm ?

nice vid , love it ! i'd like to use it to cut kite's fabric ( light ripstop fabric ). have you tried to cut things such as paper , wood , plastic ...ora fabric ? thanks

@NexiTech

2 жыл бұрын

Guys check this new dual laser engraver! This thing engrave even stainless steel - kzread.info/dash/bejne/gqOHtMeaYbHYmrw.html

Very nice laser machine 😊. I have a small business and I want to know is this laser machine can cut and engraving leather and rexine please tell me

Hi its very good assembly,can we cut fabric like cotton or poly cotton

@NexiTech

6 жыл бұрын

Yes of course there is plenty of power. You can do it for hours laser diode has very good cooling fan on the top of heatsink.

Hi NexiTech. I noticed that you are using your software on a MacBook. Do you have a link for Mac software that I could use? All I can find is Windows software. Thanks.

@Christian.V86

5 жыл бұрын

Oliver Hartmann did you find a mac software? I would love to try it but have only a macbook.

Hi I purchased a (Chinese) 2000MW but after working just once it will not open now with the software, what is the best machine and software for engraving and cutting acrylic up to 5mm thick

Does any one know if i can print onto a support 2 meter away from the laser extruder??

Can you laser mark metal using this machine? Metal marking with cermark or any dry moly marking sprays?

@NexiTech

5 жыл бұрын

Joseph Liu This laser engraver can not engrave or cut metal. You need way more power for that type of work.

Hey. What software do You use?

hai, it's possible to cut MDF wood and clear acrylic ? I usually cut MDF wood using CNC router, and need to know if I can replace it with LED laser

@thegardenofeatin5965

7 жыл бұрын

A diode laser isn't for you. A CO2 laser will reluctantly cut MDF--when cutting plywood, lasers have more trouble with the glue than the wood, and MDF is largely glue. Clear acrylic is transparent to blue light (you can see blue things through it, after all) so it doesn't absorb energy from a blue laser. Infrared lasers like CO2 lasers cut through clear acrylic beautifully.

I'm thinking of getting this to laser engrave my logo onto skateboard decks, do you think that would work?

@dustinmoore6643

4 жыл бұрын

As long as there is a way to get the deck under it probably

Hello I need that software for using the laser can you please help me find it . thank you

@NexiTech

7 жыл бұрын

Here you go forum.eleksmaker.com/topic/114/elekscam%E4%B8%A8download-instruction