A14 CPU Swap Data Recovery. Cracked iPhone 12 Motherboard. Step by Step Tutorial.

This iPhone 12 was smashed so bad, that it physically cracked the Main Logic Board & the customer really needed all their photos & videos out of the phone.
💡Do you need your data recovered? Send me a message for a quote: www.vccboardrepairs.com/conta...
iPhones have strong security built in, including full encryption of all the data, that prevents us from being able to just pull the NAND Memory chip & read it. We MUST get the iPhone to turn on, unlock the screen & click “Trust” on the iPhone screen to allow the phone to connect to the computer.
In this case, since the board itself was cracked, there is no way to actually repair the broken PCB. The only option here is to transplant just the bare minimum chips, CPU, NAND and EEPROM to a working motherboard.
And that process is a very meticulous and high risk process. As you’ll see in the video, it takes hours to complete this whole procedure and it is very highly skilled work.
We don’t recommend you even remotely try this yourself, as you will risk losing your data if you damaged any of the chips mentioned above.
This video is for educational & entertainment purposes.
In this video, we removed the underfilled NAND, CPU, as well as the EEPROM.
Did a CPU Reball, NAND Reball.
We used a 9mm Atten Hot Air Nozzle to hot air all the chips onto the board.
And viola! The phone booted up, but was I able to get the data?
Here’s the final solution to the 3 min restart problem I had at the very end: vccboardrepairs.locals.com/po...
Shiny Solder Balls Tshirt: merch.vccboardrepairs.com/lis...
Here are the tools we used in the video:
⭐ Wuzip Flux by EdgarYoReparo: wifixusa.com/en/products/flux...
⭐ Dual Soldering Iron Station: amzn.to/47RV4Dt
⭐ JBC C210 Knife Tip: amzn.to/47RV7PF
⭐ Atten Hot Air Station: amzn.to/3tjYIYl
⭐ Microscope: amzn.to/48coNYN
⭐ KORAD DC Power Supply: amzn.to/45Qxjvc
⭐ 2uul Board Holder Jig: www.injuredgadgets.com/2uul-t...
⭐ CPU Heater: www.diyfixtool.com/products/i...
⭐ Relife CPU Reball Jig: www.diyfixtool.com/products/r...
⭐ 158C LOW MELT Solder Paste: www.mobilesentrix.com/sp-x-mi...
⭐ Foam Swabs (Q tips): amzn.to/4awIgoy
⭐ Mini Grinding Pen: amzn.to/42fahx5
⭐ More Tools: www.vccboardrepairs.com/gear
➡ iOS Data Recovery Extraction Tool: www.jihosoft.com/order/itunes...
➡ Android Data Recovery Extraction Tool: www.vccboardrepairs.com/coolm...
Let me know down below in the comments, what you learned from this video!
▶Here are some other tools I have tested & fully recommend: www.vccboardrepairs.com/gear
▶Subscribe for more phone repair tool reviews & tutorials: kzread.info...
▶Need a repair? Or need to recover your data? Request a quote: www.vccboardrepairs.com/conta...
▶Useful Links◀
Crowdsourced repair solutions: repair.wiki/w/Repair_Wiki
Join my Locals Community: vccboardrepairs.com/locals-co...
30 Day Microsoldering Starter Course: vccboardrepairs.com/solder-co...
90 Day Advanced Solder Course: vccboardrepairs.com/90-day-co...
Buy a shirt: merch.vccboardrepairs.com
▶Phone Repair Videos◀
Microsoldering Repair Videos: • How To Fix iPhone 13 w...
Data Recovery Tutorials: • Where To Copy Your iTu...
Phone Repair Tool Reviews: • LIVE! iPhone 6S Plus O...
▶Best Thermal Cam Setup◀
Seek Compact Pro: amzn.to/34I4whX
Seek Stand: vccboardrepairs.com/buy-seek-...
Seek Macro Lens: www.vccboardrepairs.com/buy-m...
▶Social Media◀
Facebook Group: vccboardrepairs.com/vcc-fb-group
Facebook Page: / vccboardrepairs
Instagram: / vcc_board_repairs
TikTok: / vcc_board_repairs
▶About VCC Board Repairs◀
We are a Las Vegas, NV based repair shop who offers mail in repair services for microsoldering repairs & data recovery. Our specialty is iPhone, iPad, Samsung and other mobile devices. We also offer B2B pricing for repair shops. Contact us today for a quote: www.vccboardrepairs.com/conta...
▶Affiliate Note◀
This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!

Пікірлер: 53

  • @VCCBoardRepairs
    @VCCBoardRepairs

    Here’s the final solution to the 3 min restart problem I had at the very end:

  • @SURGE101
    @SURGE101

    Great watch as always Jesse👍

  • @JohnWilliams-zo5jf
    @JohnWilliams-zo5jf

    Keep up the good work❤❤🔥🔥🔥🔥

  • @AMCTechRepairs
    @AMCTechRepairs

    Absolutely amazing work! I am confident in my microsoldering skills, but this is just another level! I don't think I would attempt this! Having the right stencils certainly helps!

  • @oliverer3
    @oliverer3

    Impressive work! Glad the CPU survived, big chips like that have an annoying tendency to crack or die when you apply enough heat to desolder them if they've had the chance to absorb any humidity.

  • @hatgmhmd6483
    @hatgmhmd6483

    Thanks for your knowledge sharing ❤

  • @daviiddivad1349
    @daviiddivad1349

    hey jesse , at first thank you for all what you are doing and showing us ... my Question what kind off stencil you have for the rebal?

  • @farooq7504
    @farooq7504

    That's a lot of learning Thanks dude

  • @temyraverdana6421
    @temyraverdana6421

    You are magic!

  • @carlosgohn8659
    @carlosgohn8659

    Congrats Jesse, when your clean cpu with solder wick, how much did you set the temperature of solder iron??

  • @qwedkedofficial8514
    @qwedkedofficial8514

    That’s Bloody Killer Soldering Iron tip i’ve ever seen I wonder which Soldering Station you’re using i’m using the same tip but it’s not that sharp like a knife

  • @haliimaaxmed
    @haliimaaxmed

    jesse you are my idol boy

  • @bryanswaggbeast4594
    @bryanswaggbeast4594

    Brother I was sold a iphone xr back glass from amazon but it came with the camera frame and I believe it is spot welded from both ends of the frame. Is there a way to remove the spot welds/unweld?

  • @nasimcell9926
    @nasimcell9926

    good joob master,,trim,s

  • @bryanswaggbeast4594
    @bryanswaggbeast4594

    Any advice for starters on electronic repairs? Shipping methods, business po box or home address, buying broken parts for stripping? Would love to get into this business.

  • @emmanuelvalmas5648
    @emmanuelvalmas5648

    The Infiray P2 Pro camera does not pinpoint the same with the Macro Lens?

  • @ceejay_gaming9636
    @ceejay_gaming9636

    Jesse quick question, Why is it that when I used the same temperature and airflow you used to remove the CPU i popcorned mine it's an Atten unit too so am wondering where I must have gone wrong 😢

  • @miguelmacke4499
    @miguelmacke4499

    Is that shield removal a proper way to do? Or is cutting them off the better alternative

  • @adammirage4261
    @adammirage4261

    10/10 reball!!!!

  • @aerial_ace953
    @aerial_ace953

    hi can i ask , my iphone 12 has a activation lock does motherboard transplant kept it still in activation lock?

Келесі