This was my second 70mm edf. It has to be my favorite model. This jet is very forgiving for beginners with as3x. I wish they made an 80-90mm version of this jet.

@Mikeylikesit1968

11 ай бұрын

FMS does make a 80mm which is the same one as the Eflite. The FMS version isn't sold on there site but can be bought through a China website

@leyvonnewashlv4096

11 ай бұрын

@@Mikeylikesit1968 That one seems to be an older FA-18 variant while this one is the Super Hornet. I’d still try to get my hands on the current fms 80mm or maybe the FW 90mm

Nice Jon, I maidened one for a buddy. It flew really well. I didn't find it hard to land, but we had the CG forward of where you're flying it. Nice little Hornet for sure!

My Freewing 4S F-18 and F-22 have full rotating elevator stabs. They fly great in all the videos I've seen. I have yet to fly mine.

Another awesome video, I enjoy watching how you push these Models as hard as y'all do. 🤙🏼

@TwoBrosRC

11 ай бұрын

Glad you enjoy it!

Great vid. For my narrow wheelbase landing gear jets like f16/f18? Asanti AG61 nose gyro has been godsend for straight/direct takeoff/landings and minimizing wingtip to ground impact. It also shuts off in air/when gear is retracted. If nosewheel gyro not an option, LOTS of rudder expo also helps.

@TwoBrosRC

11 ай бұрын

You're 100% right, lots of rudder expo is your friend. We should have covered that, so it's appreciated that you brought it up in the comments. What you can do to make it easier to handle is use your gear switch as your rate control, and set it up so that you've got a lot of expo on the rudder with gear down.

I bought mine when it was first released and have loved it! It takes off and lands much better than the Eflite F-18 (80MM) Plus, I think it flys better too!

Nice commentary - it's one my personal favorites and yes it did bite very hard once. I have installed the Jolly Rodgers livery from Callie Graphics.

I put some softer wheels on mine, think it was dubro light weights they are alot softer and it helped alot, still a little rough with the 30c 5000mah smart pack but can take the misdletips off the wings to lighting it up. But it does splendid with Liperier 65c 3300 packs. I get about 4min 30 sec hard flying and 5mins on a slow flight. The smart pack gives me 530 to 6mins but those smart batteries are Heavy and cause bounce

Awesome Jet and Thank you for the recommendation! Ill be picking one up in a few weeks once I master the FMS F15.

@BrianTurner-ub2tu

11 ай бұрын

How soft/hard are the tires?

@TwoBrosRC

11 ай бұрын

They're hard, but you can replace them with rubber wheels or softer foam wheels if you'd prefer. Happy to help!

I had one of these a few months ago i got used. Guy had swapped in a 64mm fan being as im relatively new to rc i didn't notice..... anyway its been out of stock for months. Picked up this new one threw your links !.

INVERTED? YESSIREE! Two days ago, at our Tri-Cities Water Follies airshow, WA State, the F-35 Lightning pilot did an inverted pass, ALL fighter jets ARE designed to do this, and it IS very cool, and most (not all) rc planes look cool when they do this. My J-3 cub doesn't like it, but still does it.😁

Great flying and video Jon, this one looks like it's a bit too much for me but still fun to watch. AirHammer out!!

I love my F-18, what I like to do is have 2 steering rates , one is for taxing and then I have a low rate for takeoff and landing

@TwoBrosRC

11 ай бұрын

That's a smart way to do it!

I would really like a Legacy Hornet! The AOA wonder!!!

Yeah I’ve had this one for 6 years now and probably put 15 flights on her and she’s still in tip top shape except for the wingtips of course the narrow tricycle gear is extremely touchy even at walking speed 😂

very nice EDF, it is sad that FMS has so poor distribution here in Europe, very difficult to find planes , almost impossible to find spare parts.. :(

@TwoBrosRC

11 ай бұрын

We're sure that'll change in the future.

Very Nice Footage, I been following you since you were under 1 thounsand subscribers, more than a year now, and thank to you, i have improve so much in my flying skills, better than i was on my previus six years of flying, by the way, Which is the camera that you use, I really like your shots!

@TwoBrosRC

11 ай бұрын

Thanks! We use the Sony AX53.

2:34 Good advices.

The F18 has a fairly high aspect ratio for its wings. That along with the leading edge root extensions make it very forgiving in all conditions

@TwoBrosRC

11 ай бұрын

Except at the CG we're using, which makes it pretty unstable at stall recovery - but the fixed stabs make it a little easier to pull out of it.

Hey Jon! Great video! Besides the cobra maneuverable, how is this model compared for the FW f-18 90mm? Is it more predictable and stable? My F-18 90mm for me is by far the most challenging jet to fly and land. It stalls like crazy in slow speed. I’ve learned a lot from it, also using your great tips!

@TwoBrosRC

11 ай бұрын

It's definitely more stable than the Freewing 90, but nowhere near as agile.

@nirlachman007

11 ай бұрын

@@TwoBrosRC I guess this airframe is challenging not matter what size it is :)

How would you compare this jet to the eflite 90mm viper with regards to stability and ease of keeping it under control ?

@TwoBrosRC

11 ай бұрын

The Viper is more stable at lower speeds (up until you introduce a constant bank angle into the equation. Then you're more likely to enter a spin. Overall though, the Viper is definitely a better platform.

Have you looked at setting up full width flaps/flaperons on this one?

@TwoBrosRC

10 ай бұрын

Nah, it isn't worth the effort.

@user-zz8tf2tx9q

10 ай бұрын

@@TwoBrosRC I thought it’d look cool/more scale. The existing flaps do seem to work fine for me though.

is the gyro you talking about AS3X or something different?

@TwoBrosRC

4 ай бұрын

AS3X.

The freewing 64mm f18 has full stabs n I found it a nightmare to fly at first. Handlaunching it isn't easy as its underpowered . It stalls so easy .

@TwoBrosRC

11 ай бұрын

That's a jet we'll have to fly here one of these days. Full flying stabs are the shiznit.

would the fms super hornet be able to fly at at a local park or do you need to fly it at a ama rc flying club

@TwoBrosRC

11 ай бұрын

You could fly it at a park. Something that isn't small would be a solid choice.

not sure how you put a smc 3600 all the way back! In mine i put the 3600 smc as far foward as possible, and its still tail heavy

@TwoBrosRC

11 ай бұрын

It's definitely not tail heavy all the way up front. It might be more sensitive than you're used to, but it's most certainly not tail heavy.

You know what's next Jon... Turbine...! Have you ever flown one?

@TwoBrosRC

11 ай бұрын

Not yet, but we're looking into it!

@TheSkinon

11 ай бұрын

@@TwoBrosRC my club has a few nice ones, some like an Avanti and F4 Phantom are like 1.5m so not giant, they look amazing in the sky and do 180mph. I reckon you'd be able to fly the physics off one haha.

tried to buy this using the link and the 10% off discount - doesnt work says discount code isnt valid for the fms f18 70mm

@TwoBrosRC

8 ай бұрын

FMS changed the codes recently. All jets now need the code FMS2NR for 5% off. Sorry about that!

Whqt afterburner kit are you using?

@TwoBrosRC

Ай бұрын

KMRC

Why does FMS insist on selling the main landing gear sets as a pair and not separately left or right as a set or as separate struts? They do offer retracts but not strut sets individually. That has kept me from buying most FMS aircraft that have retracts. This is such a beautiful aircraft I hate to pass on it. But I vote with my wallet when it comes to being able to buy spare parts I need, not spare parts I don't need!

@TwoBrosRC

7 ай бұрын

It's not uncommon for them to be sold in pairs.

@hifinsword

7 ай бұрын

@@TwoBrosRC It's only common with FMS and maybe 1 other manufacturer. It's much more common to find separate struts with or without wheels, and complete sets as singles, not pairs.

You're famous 'pepitin70'! Hahaha!! YOU can always watch a different tuber channel.

@TwoBrosRC

11 ай бұрын

But why do that when you can try to tell us how to run ours?

@old-rcplane-phart

11 ай бұрын

@@TwoBrosRC Right!🤷‍♂️ Always an 🫏🕳 somewhere 🤣🤷‍♂️

@TheSkinon

11 ай бұрын

It's like 3% of the stuff he does in the videos... Guy was butthurt for no reason and had to tell everyone on the internet before he put the head of his furry suit on.

What about a x1

@TwoBrosRC

11 ай бұрын

X1?

@twobrosrc h ow muchis it?

@TwoBrosRC

9 ай бұрын

Link is in the description.

I disagree with the bit about landing. This jet is easy to land, I've never had it rock like the video. The problem is your runway. It sucks. As far as high alpha, it does it very well.

@TwoBrosRC

5 ай бұрын

You're absolutely welcome to disagree! Our runway is absolutely fine - we land a variety of aircraft on it without issue. The runway doesn't make an airplane tip over easily. The design of the airplane does.