A STOCK K24 TSX Motor Made HOW MUCH?!
Автокөліктер мен көлік құралдары
We throw Troy Wynn's All motor STOCK K24 on the dyno and see how much power we can pull from it.
Troy is running a STOCK K24 with 50*VTC, PLM Header, Ported RBC Intake, 800cc Injectors, Bosch 044 Pump. That's it all tuned on Hondata K-Pro. We get off the dyno and go right to the track for testing.
Пікірлер: 432
ATTENTION: BOLT ONS ARE NOT THE MOTOR
@tamreg04
6 жыл бұрын
i understand peoples confusion cos its not really a stock motor BUT a stock longblock.
@hereinmissoula11
6 жыл бұрын
Cams?
@humbleperformance
6 жыл бұрын
hereinmissoula11 stock cams.
@humbleperformance
6 жыл бұрын
Bseries_ Jess stock
@bluemoonestatesalesjohnsto7052
6 жыл бұрын
So stock motor with only bolt-ons and tune/race gas, stock cams making almost 300 at the crank?
Those are awesome numbers!! It's cool how Alex is able to make the trip to the track and give advice as well.
@troywynn5872
6 жыл бұрын
Jordan G ya it was pretty awesome they definitely treated me and my family very well!
I love all the "it's not a stock engine" comments lmao
Great video!!! You just became a Top 3 channel for me. Keep putting out that good shit!
Solid solid numbers. You guys are always putting in work. Love the videos
I saw this car in past videos! Glad it was featured!!
Loving it!! Humble performance are gods!!
11.5 is awesome! Super impressed! Motivation to work on my integra!
Always look forward to seeing your videos! Keep it up
I mean bolt ons help alot with a k series. i would be sad to see the regular curve of it was a bone stock engine. The fact that you can even get that kinda power on a stock cam engine is awesome.
@kotajames6211
Жыл бұрын
Is this Factory Internals?
Your channel keeps making me want to do an all motor K after I finish my boosted H.
@4door_papi
4 жыл бұрын
Funny im about to finish a turbo h in my accord then do a all motor k24
I need you guys to hit my S2K up sometime this year, early next.
in 05' i built my car, eg stock tsx engine (Had a type r intake came) %) deg vtc, DTR header, aem ems, and TWM ITBs and it made 259/205 so i 100% with this video. Sweet ride.
Nice 5th gen Prelude sittin behind that maroon hatch
Ohh yeah stock! And iam tony montana saying say hello to my little k2fou
Very impressive 💪🏼
my brother has a bone stock k24 block, k24 head with tsx cam, stock injectors, type s tranny super single non lsd, with type s oil pump 4 piston port, with big tube open header. Chassis is dc2 98-99 can't remember well enough but these k24 aren't a joke they're fast asf spanked a fully built b20v that made 226 tuned against my brother k24 street tune.
I remember racing Troy when this car had a b20 in it. Lots of work has gone into this car since losing to a b16 swapped CR-X.
When I finish my k24 build, etune from you guys hopefully...... Edit. For some reason I figured you guys where from the west coast. Just looked up your shop and realized you are in Tulsa. Great news as I am in missouri
@Shadow0fd3ath24
5 жыл бұрын
tulsa? holy shit im only 20 mins away thasnks for posting this comment i wouldnt have known otherwise
@jxavier4990
5 жыл бұрын
If.you.dont.live.in California...you dont.live.on.the.west coast.....😌
That’s some serious power from a bolt on K24. I’m assuming no power steering or A/C. So could I get 300whp with 11.5-1 pistons and good cams, header, exhaust and bigger injectors? CP pistons, assembly by 4piston with non-ported head, only new valve job and stage 4 Drag Cartels. Nice video, you guys do great work, wish I was closer
Lol I remember doing this back in 2009. To an eg and ef build. NA on both at Bradenton Motorsports. Ah memories. Neil Sutton was a huge admirer and KJ. Gear head performance made an aluminum dash for me. 🥰😍
Makes me excited to build my K24. Looking at doing minor upgrades......stock bottom end, cams, injectors, cleaned up head, intake manifold, and throttle body
@thedude3189
2 жыл бұрын
Port the head and port the rbc with a nice tb size...you should hit 280-290whp
them times though! impressive
I've been in the race scene and modifying cars since I was 13yrs old. I'm now 45 and this isn't bone stock. Bone stock has always meant as it came from the factory. I get it has stock internals and that's cool. Very impressive for a stock block, heads, cam, etc. But it is not "bone stock".. Neways with that being said it is a very nice build, continue the good work. Just got my first Honda, a 04 TSX. Let the bolt ons begin!!
I love the "Just on M5" comments in this video lol
that's awesome power for a stock motor with bolt ons and fuel
Love the channel and love the street cars
My boy Tj putting in some work let's see what you run in IFO my dude
love seeing customers cars perform..! now customers cars in mexico vids.!
Guys remember its a gutted hatch very light power to weight ratio makes a fun drag car. Also humble knows how to safely pull as much out possible he is nice enough to give some info but honestly if you found the secret recipe u aint goin share it after all the hard work you have done. You can clearly tell it has a massive amount of timing and vtc angle with m5 fuel keeps combustion cool and no detonation pump gas not possible
10:31 , that VTEC cross over 🔥
Take a shot every time he says “let’s see what it will do” . Take 2 shots every time he says “bone stock”
@Humble Performace Im building a k24a2 right now and would like to know a good recipe for 300whp on 93 octane, would love to go to your shop to have it tuned once I finish the build. Keep up the good work.
Stock motor can mean factory tuned or stock internals with bolt ons. Depends what you mean by it,
HONDA SO MUCH LOVE thanks for the video
@Humble performance im currently getting parts for my kseries build ( fully built prb head , 2.2 cams n stock k24block) what injectors do you suggest
cant wait to see david and lee car. run this year ! Minnesota stand up ~ #STREETCERTIFIED
oh man, i was routing for Marty soo bad to get that 12.0! LOL
@humble performance did this have the k20 oil pump when tuned
Ive never seen a k series on Nos been tuned here. How comes???🤔🤔
Stock? Sure. It doesn't sound cammed at all. Gotcha! 💯🔥
@humbleperformance
4 жыл бұрын
It’s stock cams. Rich idle on methanol
That's nice 270hp only rapping out to 7.5 probably a stock oil pump that's awesome I'm looking to do a ported type s pump moroso oil pump and rbc can hear on my k24z3 lmk if there's anything I should know
What rpm are you guys reviving them stock k24 too ?? And if you had a balancer shaft delete kit and supertech valve train what rpm is safe to rev as I'm using it on circuit racing
Any estimate what power that same car would make on m1??? Wondering if it would be worth it or not
Yo the I T B sticking through the hood though
Damn I knew it. Almost on the dot.
Damn sick! What's the title of the 1st song?
Purple and got a lot more in it but homeboy keep hitting the rev limiter he need to shift
good power
Wondering have yall ever had the issue of hitting boost na
Troy is a driver💪Alex is a great tunner👌and that maroon hatch needs a LSD and a different final drive asap .that white hatch is clean but that front bumper is an eye sour there has to be a cleaner way to help the areo .I know that's the point of that plate but it's just not asteticly pleasing to look at .not hating I understand function over form idn respect eather way .just an observation 🤗
@troywynn5872
5 жыл бұрын
Finally being addressed lol
Is it still using the k24 balance shaft oil pump? What’s the redline at?
What kind ecm your guys recommend me for my k24 2010
That dark purple ish hatch needs a better driver mod he needs to avoid hitting rev limiter
Can u swap tsx head internals to a k24a1 to make it run both vetc
That thing is sick!! Good work!
Hi guys... what is possible to get from a k24 RAA accord on a stock as a family car, I do not want anything too crazy but I just want to have a little bit more humpf from the engine?
Bad ass! I just picked up a 6spd tsx how much of a difference just the vtc gear make? And what was this setup revving to?
@Questchaun
5 жыл бұрын
Just gotta get a type s oil pump and vtc lock gear and you will be bOnE sToCk
What kind of bolt on parts get you 300 hp ?
Super simple... running methenol on $1000 worth of retail priced tuning...love it
@geoffreykidder5694
5 жыл бұрын
Try a DSM... I've got less than $4k into a 600hp+ AWD 5spd. 6266, Link on SD, fuel, bought the built longblock for $1000
@Ehren1337
4 жыл бұрын
Geoffrey Kidder same with b series. 2200 in b series longblock to handle around 700hp.
Trying to build my first k24 stock what kind of wheels can u send me info on everything plz thank u
But what does stock k24a produce without bolt on’s and pump gas....
Where are the links for all these parts is the better question
Spicy i need that for my rsx
Did y’all change the oil pump or no?
I can't imagine what power I'll make in 2100 pound 90 si civic. Doing k24a2 same intake e85 header, built for turns.
I'm kind of late to this conversation but power is an unknown quantity unless measured with weight. 100 hp can spank 271 hp if the total vehicle weight is 700 pounds lighter (just an example) so what I want to know is the curb weight of the car. Then I can make my power to weight calculations to equal or beat these times. Sometimes , within reason it's cheaper to remove weight than to add HP/TQ
@ihate2wait
4 жыл бұрын
I guess I should add what my goal is, I'm swapping a stock k24 into a Fiat X1/9 with the Honda 6 speed. The estimated curb weight will be 1950 pounds. I'm wondering how this compares with the Hondas that are pulling 12s or 11s. I will likely add some bolt-ons where room permits but room is scant in this little car.
What transmission are you running?
Fuel is crazy .... 93 oct buddy made 238whp stock long block just bolt ons
@superjervis
4 жыл бұрын
what bolt ons does he have?
K24 is beast
How many degrees of timing at vtec whats your rev limit
Crazy fast I was doing 11.8 on a 400hp b20vtec turbo eg hatch on e85 smh mine was daily driven tho full interior also lol I wonder what time I would do if fully gutted
@Ehren1337
4 жыл бұрын
Raymundo Vazquez probably 11.6
That fuel makes a huge difference, bone stock or not.
Did you remove the balance shafts, not trolling just asking if most people remove.
I was thinking u would make a dyno with its original vtc gear. Even if its a honda part u got to admit that the 50 vtc gear is a change in performance. Does it have a type-r oil pump?
@troywynn5872
5 жыл бұрын
Bruno Manco type s
11:03 What in the hell is that thing on the right?!
Badass!
Stock pump as well ?
Was this stock oil pump? Or type s
whats the song called? its dope, share the artist yo
The burgundy hatch is sitting on the rev limiter too long between shifts... He could pull a half second by shifting better
@richmedina2738
6 жыл бұрын
I mean when I drive it literally bumps limiter and already in the next gear
@willisan
5 жыл бұрын
Glad someone else noticed that
@Kai_DC2
5 жыл бұрын
Same i was saying, hitting limiter too long
@Outlaw_Tuned
4 жыл бұрын
Yea he needs to be more aware about the rev limiter
@jdmr.3346
4 жыл бұрын
I would raise the rev limit 200 rpm and get that shift point dead on instantly.
"BONE STOCK"
Still good. Shit moved and sounded good too k all day
Is this swap basically the same exact process as it would be into a del sol since it shares the same chassis as the eg?
@humbleperformance
5 жыл бұрын
It is the same.
What's the rev limiter at
what size front tires
Are many people running the 50° vtc on stock k24a2 or running pinned to 40°
@jonathancastillo444
Жыл бұрын
Pin it for safety. IIRC you can lock it in software to 40° max, but pinning is cheap and a great way to be certain.
Is this with the rbb head
I knew exactly what you meant. Bolt ons = still stock
How is so loud
is that stock k24 on m5?
I’ve seen fully built K24’s with high comp and cams not able to make this kind of jam, can you explain this phenomenon?
@humbleperformance
4 жыл бұрын
M5
@bluemoonestatesalesjohnsto7052
4 жыл бұрын
Humble Performance wow!! That much of a difference? Thanks and much respect to all your work
Let's see what we can do!
so my guess is, straight exhaust, ~10hp , intake manifold ~10hp intake ~5hp, throttle body ~5hp, injectors ~10 hp , pump 0hp ,advance timming ~6 hp fuel M ~15 hp total of ~262hp add a perfected tune of ~15% increase makes it ~300hp
Boriqua Power
So this is all Factory Internals?
@humbleperformance
Жыл бұрын
Yes Sir.
I make 265whp with pump gas all stock jdm k24a...lots of porting.
Song?
244whp is nice. but what about the k24 torque.
k.series best 4cyl engines ever made in my opinion