Get yourself a solif piece of copper, hold it behind the hole, then mig it, mig wont stick to copper, eady to fill holes, no matter how big.

just FYI, Alot of people who weld at home don't do this or know this. But maintenance, you should really blow compressed air through the hose from time to time to clean out the " Liner " that the wire etc runs through. it's also serviceable part aswell you can replace the liners.

You have to be my favourite GQ builder on KZread, you keep doing the simple but awesome mods on the cheap, the wiring relocation is perfect as you said never blown a fuse, and even when I did it was only wiper motor one 😂 defiantly copying that cause I don’t want it in the cab either, Big ups Tommo keep killing it

Bewdiful Tom! Folks are gonna be critical for the fuse biz but youve explained it perfectly for me. The build is looking epic, those wheels are crazy, little bit of tweaking with flares its gonna be mint. Cannot believe how hard you work man, doing this for us, day job, fam - you're a legend man. 👏 ✌️

Gday, it’s unreal how much wheels and tyres change the look, the engine bay is definitely going to have that clean look, top job mate, cheers

you do what you want mate…we will all learn from your adventures…the good and the other…great entertainment either way!

Those rims and wheels are sick! Looks awesome! Would love a black set on my bt50

Just sayin there's not much more in pulling the body off the chasis at this point. Clean it up, new body mounts, maybe some long arms..... the cliff half way down the slippery slope😁

Them tyres and rims are very snazzy mate, they do make a very big difference 🤙🏽👍🏽

I was a questioner on the last ep: you're right the fuses and relays will be fine where they are, shaved bay looks mad. I think go a different colour to exterior but surely not gloss black. Gloss black is the cover up colour haha. Maybe Rally white? Or just opposite to the exterior. Wheels look good.

loving this build🤟🏽

Love the vids mate. Best of luck with the growth of the Chanel for 24’. Let’s get this man out of his day job. One of the few I enjoy watching these days

@RoamLyfe

6 ай бұрын

Absolute legend 🫶🫶🫶

Love your work mate keep going

Looking the goods bruz!!

The blue looks good

Go the Patrol! GOOD work with this build ! 📹🛻🤙😎

Will be keen to see where you put the battery keep up the good work mate

Offset and rims looks. Hopefully you can cover them cause in Tassie our gq was defected for neg 30s which are well covered with conveyor belting, but the officious mermaid said track was too wide!

Luv ur work. Following with interest

Shame I can only drop one like! Love ya work 💪

Yeww how good is a new vid 👌🏼

GU blue is a great colour

@RoamLyfe

6 ай бұрын

Yes I actually love that colour!!

nice rims

Here’s a suggestion and something I really wanna try with my Ls swapped gq, custom interior, doing away with the hole dash and putting something more modern in like even trying to fit a gu centre dash

I’m sure there’s a little water tight box you could modify to cover the fuses then it’s no worries.

For the engine bay I suggest do something different like the American JDM cars. Totally different colour to the exterior. Love the work and the content. Keep up the great work

Looks killa

As someone who paints cars for a living, with a shaved bay please go with a metallic colour you won’t regret it. It’ll show off your hard work.

How do you plan on locking hubs in and out with the caps on? Great series been watching everything 👍

@darcykeddell4930

6 ай бұрын

Will have to cut the centre of the cap out like the standard caps on a gu

Should go an xlink on the front 👌 have one on my gq 100% worth it

Love the car

20c piece fills those big holes nicely.

Keen to see the finished product in the bay! Good quality wheels but cheapo tyres what’s the reasoning behind that?

Can you please tell me the color code of the three graphite raptor paint jobs you guys did a couple of years ago, I’m set to line/paint my patrol on Monday. Cheers and Aloha from Hawaii

Good car

Where do you get maxtrec tyres in Australia from reliable sources?

Use a piece of brass as a backer to weld the holes

J I st curio I s about how you will go getting a RWC with beadlocks as they are illegal?

Minticle bro Minticle

how cool would it be if you sold merch or something to raffle off this build? Just an idea, i dont know the logistics from ur end :)

What pressure are you running on those tires?!

how are you gonna lock the hubs

Jaw-Dropping Mods no same old same old

@RoamLyfe

6 ай бұрын

Jaw dropping mate, jaw dropping 😉

should of got the tig out mate and gave it a go

Is it 100% that if I run 35s I will get defected on a 3 inch cheers

We gotta get a interior episode like sound deadening and some different seats not xr6 seat

I have liked & commented on every episode to feed your "I'll go rhythm ". Doesn't a shorter weekly episode work better for your "I'll go rhythm " than a longer fortnightly episode?

Notes for building a 4x4: make it harder to get to your fuse box as opposed to having a fuse box with easy access, right got it!

@finn-bp6ru

6 ай бұрын

not as if he spent 5 minutes explaining that it is not going to be a problem or anything 🤨

@Sucobuilt

6 ай бұрын

Notes for watching a youtube video of someone building there 4x4. Follow step by step exactly what they do because that’s what i want to do. Got it!!

@rileypriest6240

6 ай бұрын

Come on children grow up, last time I checked it’s his car not yours. If ya don’t want to build your car that way, well guess what…. You don’t have too 😉

@1993Revhead

6 ай бұрын

Lucky hes not building it for anyone else.

The whole premise of the channel is teaching / sharing. Why would you not share issues with tyre / wheel fitting issues?

@RoamLyfe

6 ай бұрын

That was more a joke but I had to use a set of screw drivers as pry bars, it’s the normal way to do it really !

@danielgrice6344

6 ай бұрын

Copy , appreciate your work mate👍

Wtf is a fender mate?

How you going to lock your hubs 🤦‍♂️

@RoamLyfe

6 ай бұрын

2 Allen bolts and the cap is off, but it’ll be sitting in the shed for a while so may as well leave the caps on for now

Another wagon (I'm a wagon head) I have no issues I own 3, how about another brand with another engine brand