You are the only person on this planet that can get me to watch a 26 min video about tr... shop-math

@ChunkyMonkaayyy

5 жыл бұрын

This is pretty great.

@christianderbyshire744

5 жыл бұрын

I don't even look at how long his stuff is I just start watching and before I know it I'm 2 hours into a binge wondering why my wife just left (my wife did not leave it's a joke) I hope

@andrewaustin6941

5 жыл бұрын

@@christianderbyshire744 LOL I HEARD THAT BROTHA'

@markfisher7962

5 жыл бұрын

That was 26 m8nutes? Oh, right. Wonderful!

@freerideshuttle

4 жыл бұрын

I'm literally watching hours of his videos lately. Tis isn't ever too much. I could quit my job to watch these videos... Oh and now I want a garage full of machines, chucks drills, comparators, instruments and lots of nasty stuff mixed with oil and steel chips

love how you started a video about sine bars and angles, but ended going off on a tangent.

@phoobar9640

4 жыл бұрын

kzread.info/dash/bejne/oYectqxyYMmpY5c.html

@dravenwrightlee8390

4 жыл бұрын

I love and hate that you said that 😂😂

@spc.callahan1462

3 жыл бұрын

RDRR

@millomweb

3 жыл бұрын

I guess that struck a chord with you !

@SeattlePioneer

Жыл бұрын

Yes. I found these concepts to be VERY poorly explained. Flashlights? Get real.

I just learned more about sine and cosine in 26 minutes than I have in 55 years. Great video.

@msihcs8171

3 жыл бұрын

I aced trig in high school like >95% A aced it, as well as calculus (trig gets thrown in often, especially in a standard calc 2 curriculum.) This is possibly the best real-world scenario that I've seen for where trig can be applied.

@Backtrack3332

3 жыл бұрын

@@msihcs8171 wow dude you are so cool. Here take a cookie.

@JosueRodriguez08

3 жыл бұрын

@@Backtrack3332 wow dude, how does it feel know you are stupid in the inside for hating on people that likes math?

@innes2892

3 жыл бұрын

@@JosueRodriguez08 I don’t think he’s hating on someone who likes math. I think he’s hating on the bragging Niko N had to do before making his actual point.

@jardeekempton8352

3 жыл бұрын

@@innes2892 he was probably staying that he aced those classes cause somebody would've questioned what makes him credible and why they should listen to me

"Smaller and smaller. Until they're scrap. That's how I know I"m done."

This was so incredibly helpful!

@Razehell42

5 жыл бұрын

Had a real hard time learning trig in school. It was only until I learned what the real world use of it was that I actual understood it. I remember asking the teacher back in high school what it was use for only to be directed to a posted hung on the wall that was a chart with what careers used what types of math, Out of likely 30 careers listed trig was only indicated on math teacher and rocket scientist. What an udder fail. I'm sure if I grew up in a manufacturing heavy city 50 years ago I would have had no issues learning it as it was be taught practically how it was actually used.

@MT-jf1tn

5 жыл бұрын

A collaboration between the two will be great! ALEC AND THIS OLD TONY, what this old tony will teach the young Alec?

@lifuranph.d.9440

5 жыл бұрын

@@Razehell42 So true.

@JoeBlogster

5 жыл бұрын

@@MT-jf1tn He can start by teaching him some reputable shipping companies

@Leib33

5 жыл бұрын

@@JoeBlogster LOL. Poor Alec and that poor abused machinery!

10:40 Looking at your box of gauge blocks, I'm very sorry to be the one who breaks the news, but you clearly got a defective set - they're pretty obviously all the exact same height...

@Kaser

5 жыл бұрын

Nice one !

@kiritvara257

5 жыл бұрын

Attila that was not point sir. How tool works.

@kiritvara257

5 жыл бұрын

How the tool works.

@TheRealDrae

4 жыл бұрын

r/wooooooooooooooooooooooooooosh

@jaqssmith1666

4 жыл бұрын

@@TheRealDrae go back to reddit.

"And remember, the shift key on your calculator is not just for typing capital numbers".

@rodbennett4790

4 жыл бұрын

Thanks! I missed numbers and heard letters. Too funny!

@Potti314

4 жыл бұрын

One button on the calculator read "tot" and another one "tot^-1" - so cool.

@flyinbryan79

4 жыл бұрын

On the subscribulator ;)

@alexpav3167

3 жыл бұрын

5318008

@Monst3rNetwork

3 жыл бұрын

The arctot is equal to the difference between two calculated capital numbers which are measured with a Cosine error tampered test indicator on a sinebar floating in space.

As an Engineering student, that was the best explanation of basic trigonometry I've ever heard Nice

Some intelligent Person once said, if you can‘t explain something in an easy way, you did not understand it. You made it look so easy, i feel stupid because I had a lot of trouble understanding it years ago. You really should be a teacher if you aren‘t already. Your Videos are always informative, funny and captivating. You really have a Talent to make dull things feel like the most interesting thing in the world. Thank you for sharing your knowledge and skill.

@buckhorncortez

5 жыл бұрын

"Some intelligent person"? If you consider Einstein to be "intelligent," he said, "If you can't explain it simply, you don't understand it well enough. "

@smittywerbenjagermanjensen8414

5 жыл бұрын

Buckhorn Cortez yes, that is what I was thinking of. Didn‘t take the Time to look it up, just remembered it roughly and that somebody extraordinarily intelligent said it.

@smittywerbenjagermanjensen8414

5 жыл бұрын

@Donald R. Cossitt I don‘t know if I get what you mean. Are you talking about him being a teacher in the sense of him teaching „KZread classes“

@thenerv37

5 жыл бұрын

Smitty, Don’t feel stupid for not understanding what was poorly explained

@peterreid2888

5 жыл бұрын

@@thenerv37 Touche....

I don't own a mill or lathe yet, but when I finally convince my wife I need one, I'll use this video to convince her I need a sine bar as well.

@westernclimber

5 жыл бұрын

@Mike Oxenfire weak. What are you 12 years old?

@westernclimber

5 жыл бұрын

@Mike Oxenfire ok dude👍

@avocares

5 жыл бұрын

After you get the sine bar you will then need to convince her you need a granite plate to use it on, then explain why they are so expensive and you can't just use a scrap cutoff from the local countertop place, then explain why it needs to be on 3 feet a very specific distance from the sides. The bright side is she will eventually throw her hands up and say "as long as it makes you happy". Not that I would ever talk from experience...

@westernclimber

5 жыл бұрын

@@avocares hahahaha love it man. I've already googled "can you use granite countertop as a surface plate" and the answer was "you need a sine bar and mill first"

@jcknives4162

5 жыл бұрын

Having been married 4 times and this last one for over 20 years... I finally figured it out. I mean how to get your wife to WANT you to buy toys... I mean tools. Make stuff for her. It's that simple. Or in order for you to do something that she wants, show her how this new tool (insert any damn tool you need) will help you do what she WANTS you to do. OH, and it does help if you bring her to your working area and let her watch you do some magical thing like cutting a special thread on a small part. OH... I forgot to tell you. If by chance you are one of those who believe that opposites attract... that isn't love its lust. so... Hopefully you were smarter than I was and you only married once and she has A LOT in common with you. Then she will understand exactly what the hell you are doing and why. That way, when you say "Honey, how about we go to Woodcraft and look at the wood lathes." and she says..." How about we go to Woodcraft and buy a wood lathe." You will know you have chosen wisely... BUT... be damn sure you make stuff for her!!! Now. How did I get my first metal lathe? I had a great rifle that I loved but I found a South Bend 9A lathe that I wanted more. I traded. Here is the small lesson. If you sell something, use that money to buy something to replace it. Similarly, if you are going to trade something, trade it for something you are going to replace it with. I had a great rifle that my grandpa had given me so the ole 30.06 just wasn't needed any more. hence my new lathe. Good hunting!! OH, and in case I forgot to mention it... make stuff for her!!!

Oh god, it makes sense! I'm hyperventilating. Is this... Is this what math feels like?

@hex1101

4 жыл бұрын

LMAO I totally feel the same

@Stallnig

4 жыл бұрын

kzread.info/dash/bejne/f2SuwZqAmprdl6g.html

@JanBinnendijk

4 жыл бұрын

Well.. Yes...it's a bit like when Neo Sees the Matrix before his very eyes at the end of the film, or how Emmet Brickowski sees al the partnumbers and possibilities in the Lego Movie.. once you see it.. you feel like.. "That's all?".. I worked with Sinebars a lot, Just like This old Tony, i made one myself, since i needed it for very precise grinding of angles.. My last Math Teacher "handed me the tools" he made me see it.. and from that moment on, i was able to calculate Cartesian coordinates from drawings with polar dimensions, i could calculate the trail of a motorbike, by measuring the Fork angle, the offset, Fork length and wheel diameter.. all of the sudden.. these things couldn't hide their secrets from me.. I always say, if you can use math in everyday life, it becomes easy.. because you're using it all the time..

@Hansengineering

3 жыл бұрын

@Evi1M4chine 3b1b helped me get a degree. I had been through three damned courses talking about Fourier, and his video explained it in a new way that made sense and allowed me to understand Fourier's work at a deeper level.

@badgermcbadger1968

Ай бұрын

​​tbf 3b1b vid about Fourier is useless if you haven't learnt about it prior, he explains what it does to a degree but not what it means

I always wondered what sine and cosine actually represented. Nobody ever explained it, even in my college trig class. All I knew was to look it up in some table. The explanation with the flashlight and shadow length? Priceless! Every trig class from here on should include this clip. Thanks a million for your wonderful videos. (And I don’t even have any metalworking tools!)

@stargazer7644

4 жыл бұрын

You made it all the way to college and managed to miss every explanation that the sine and the cosine are the ratios of two sides of a right triangle?

@chaos.corner

4 жыл бұрын

@@stargazer7644 Also that they describe the cartesian coordinates of a point travelling around a circle.

@millomweb

3 жыл бұрын

Not even a hacksaw ?

@leomadero562

3 жыл бұрын

My teacher's motto is literally "you don't need to understand it, just memorise the formula"

@Intellistan

2 жыл бұрын

Yes. Yes yes yes

Man you got it all wrong! Sine is what your kid does at the bank when they want to buy a car and promises to pay for it, cosine is what the bank makes you do so they give your kid a loan for the car, then cosine error is when the cosine ends up paying for the car because the sine didn't make the payments. And that my friends is why a sine bar looks like a little car with a rear spoiler.

@mrphilbert1

5 жыл бұрын

I just read that to my mathematician wife. She chuckled for a full 38.243 seconds.

@denisl2760

5 жыл бұрын

So where does tangent fit into all this?

@Julez2150

5 жыл бұрын

@@denisl2760 The whole thing is a tangent!

@duesing6

5 жыл бұрын

@@denisl2760 Well if you say no to you kid on the cosine they will throw a temper tangent.

@skatewithvanz

5 жыл бұрын

Gold

Ladder historian here. The people climbing the ladders did not die from the fall, there were long dead before they hit the ground from suffering a severe case of Triginosis. They lost the ability to calculate angles, died, and then fell. Don't trust me? Don't go look it up.

@ThadEGinathom

5 жыл бұрын

Ladder here. Can... Aaaarghhh! Another Triginostic idiot! It isn't just the people that get hurt

@denism8494

5 жыл бұрын

Ladder user here. could you hold my ladder at the bottom for me please?

@hajmola7605

5 жыл бұрын

I once read somewhere 'Never trust an edited comment.'

@Gottenhimfella

5 жыл бұрын

@@denism8494 Dry ice salesman here, who moonlights short-selling stocks of life insurance companies. I have just the thing for you to use to chock your ladder.

@Anvilshock

5 жыл бұрын

Wall here. Are you doing something later?

Q: Why is a 5" Sine Bar the most popular? A: 5" converted to metric is 127.00mm the first time imperial measurements and metric measurements are whole numbers.

@millomweb

3 жыл бұрын

Oddly, it's half of 254 !

@mreese8764

3 жыл бұрын

5" = (2^7 - 1) mm 🤫

@BloodThunda

3 жыл бұрын

Don't question it ... the space time continuum might collapse... just agree and nod

@sthawkonthetube

3 жыл бұрын

Man, I’m agreeing and nodding so much I look like a bobble head....

@andrewgeary4720

3 жыл бұрын

@@mreese8764 so it's prime ... yep 127 is PRIME ... now it make sense.

"What are you doing, @ThisOldTony?" "Oh nothing, just explaining in 26 minutes what you didn't learn in 2 semesters in high school trig."

@elcidbob

4 жыл бұрын

In fairness, this is only around half of a lecture's worth of trig information.

@GingerNingerGames

3 жыл бұрын

You mean shop maths

I'd love to type something funny here, but my mind is still blown. I am 47 years old and have always had a massive mental block when it comes to trigonmeshopmath. I feel like those reference tables and the clever buttons on the calculator are genuinely approachable now. Honestly, sincerely, I am truly grateful for this. Thank you, and please keep doing what you do.

@timothyprochilo4840

5 жыл бұрын

jellyfinger i am also 47 and feel the exact same way. Goes to show you, its not the subject or material it is the manner in which it is taught.

@jellyfinger

5 жыл бұрын

@@timothyprochilo4840 - Couldn't agree more. I am watching this for the 5th or 6th time now, pausing and taking notes.

@sparkiekosten5902

5 жыл бұрын

@@timothyprochilo4840 Ditto

@FowlerAskew

5 жыл бұрын

Check out this visualization of the trig functions with the unit circle of you want to learn some more i.imgur.com/jbqK8MJ.mp4

@captcarlos

5 жыл бұрын

That is a good graphic, pity I can't input 2 values and get the graphic to show the graphic and all the other values. That would be a useful app... Any one listening?

If you're not sure why 10 inches is more popular than 5 inches I'm not sure I can help you.

@Obsidian0Knight

5 жыл бұрын

hahaha! thanks for the laugh!

@alexandruschaub1481

5 жыл бұрын

I was expecting this comment from AvE . Ending with "partner". :)

@barrishautomotive

5 жыл бұрын

@@alexandruschaub1481 yeah, there's definitely some AvE influence there

I love this. I'm a high school maths teacher (that's right.... mathS) and I've never really used trig beyond theoretical applications. As someone with little to no experience USING trig, it's hard to convey this mathemagics to students. But this video is a beginning. I need to learn more so I can impart these important concepts better.

@martinsweet3468

4 жыл бұрын

shouldn't have gotten rid of shop class!

@twlson49

4 жыл бұрын

I don't know if you teach equation of a line slope intercept formula but I am a retired millwright and I used that formula to align pumps and motors to one another. The centerl ine of the shafts are the lines that have to be within a couple thousands of an inch.

@chaos.corner

4 жыл бұрын

Also often used for 3D stuff with computers and I use them all the time when designing objects for 3D printing.

@chadjsaul

4 жыл бұрын

Maths... mathemagics lol

@millomweb

3 жыл бұрын

@@twlson49 Meanwhile, everyone else just uses a rubber coupling.

I've been a toolmaker for 45 years and also a metrologist for 26 years. A sine bar and a set of gauge blocks are just awesome tools to have in your tool shop. It's probably the most accurate way to set something at an angle or to determine an angle.

The biggest issue with math and school is the inability of schools to relate it to anything practical. Once we know why it’s useful it makes it easier to want to learn.

@manfredschmalbach9023

5 жыл бұрын

Some do. kzread.info/dash/bejne/Y2eq2qqRhq6sqpc.html 4.50 minutes in

@MemyselfandI001

5 жыл бұрын

Truth!

@dimitar4y

5 жыл бұрын

That's the problem with all modern education. They took away ALL practicals. Teachers are ranting wankers who don't even practice what they're teaching. :/ Screaming textbooks at children all day isn't a very ethical job. Teachers are way overpaid for being text to speech programs.

@misterZalli

5 жыл бұрын

True, the first time I learned sine and cosine was from a beginner's video game developing tutorial because you needed them to make objects move at an angle, and because of that I always remember them

@lawrencemiller3829

5 жыл бұрын

When public education is forced funded and education is mandated, it is no surprise the quality and usefulness goes down. Consider that many public schools are also daycare centers and indoctrinate siphoning funds away from real useful practical education. Consider universities mandating all sorts of diversity classes and such to get a degree. It is indoctrination coupled with a type of extortion. Consider people taking classes for what they want to learn are more likely to work to learn. Likewise when parents and guardians are involved with their children's education, the children are more likely to learn. School choice is a step in a better direction.

Hey TOT, thanks for taking us on this tangent.

Lol the little touch of adding “tot” in place of “tan” I missed that the first time watching the video haha

@danielnorman8595

3 жыл бұрын

It also says subscribeulater at the very top

@csnider_1281

3 жыл бұрын

He spent wayyyyyyy to much time matching that text because I couldn’t tell until it went slightly out of focus.

THANKS TONY. After 53 years I finally understand Sine/Cosine=Tangent. With you teaching, I could have been somebody...a contender.

Glad there were no metric angles in here

@Intermernet

5 жыл бұрын

To convert imperial angles to metric angles, just multiply by e^(2iπ ). Also works for converting metric years to imperial years.

@5000rgb

5 жыл бұрын

At very small angles there's no math to convert to radians.

Showing this one to my students next time I teach my shop class. Good info

@starcitizenmodding4436

5 жыл бұрын

i learned this by using fusion 360 which is free. i think its a great learning tool!

Holy fuck, I have, for some reason, never properly understood trig. I am in high school, and this is about the best explanation for it and has helped me really understand it

Definitely fell into the "Age where other stuff is on the mind" while trying to learn trig. Thanks for this video, it helped to visualize some of the stuff I can faintly remember hearing mentioned while passed out with my head on the desk.

There's a sine bar and a sine table. If you want to go even bigger you can use a Sine Field or you can just go have a coffee with a comedian in a car.

@heukelummer

5 жыл бұрын

a coffee with Seinfeld?

@EweChewBrrr01

5 жыл бұрын

@@heukelummer A coffee with Sine Field (Seinfeld)

@537331208

5 жыл бұрын

Comedians in Cars Getting Coffee

@crackedemerald4930

5 жыл бұрын

I prefere sine cubes

@tadamb1

5 жыл бұрын

What is the deal with this shop math?

🤯 Tony, I wish you were my high school math teacher. I always had trouble with trig. You just simplified it to the point that my minuscule mind could digest it. Being a crane operator, we deal with a little trig. However, nothing on the scale that you machinists mess with. Thanks for yet another great video! 🙂👍

@burningdinosaurs

5 жыл бұрын

Hey, Jimmy! Come here often?

@ToTheTopCrane

5 жыл бұрын

@@burningdinosaurs, hey there! I'm here for every new video. 🙂

"Why do I need to know this?" Deer staring into headlights - every math teacher ever.

@borysnijinski331

3 жыл бұрын

The motto of the proudly ignorant: “why am I learning this and when will I ever use it”.

@ShortArmOfGod

2 жыл бұрын

Well then why are you learning it and when will you use it?

@19mitch54

2 жыл бұрын

While I may never need to solve a quadratic equation in my daily life, math is hands-on training in manipulating concepts in my mind. It teaches you how to think. I may not be a great thinker, but I am a retired engineer (maybe never a very good one). Since my retirement, I try not to think too much.

This is more useful than my math class, the teacher's motto is literally "you don't need to understand it, just memorize the numbers"

Okay, so now that a YT machinist has taught something that none of my so called "teachers" could (30 years after I graduated *cough* high school), where do I go for my certificate from ToT Universtoty?

@thekaduu

5 жыл бұрын

Pay crap -> Get crap -> "Teacher"...

@SteffanRhoads

5 жыл бұрын

The final is every time you make something in your own garage or workspace!

@ytwdh

5 жыл бұрын

That's exactly what I was thinking... ToT just taught me more in less than half an hour than I ever learned in one semester. Thanks, Tony! A horse walks into a sine bar. The bartender asks: "Why the long face?" A pirate walks into a sine bar with a steering wheel attached to the front of his pants. The bartender says "Hey, you got a steering wheel on the front of your pants!" The pirate says "Arrrr! And it's drivin' me nuts!"

@maxximumb

5 жыл бұрын

The problem teachers face with this kind of dry subject is putting it into a context that students will be interested in and concentrate. Viewers of this old channel are interested in making lumps of metal different shapes. Tony can use applicable examples to show how it all works which makes the information bit more interesting and you engage more. In a class of 30 to 40 students, very few of them will have a similar set of interests, so teachers are limited in how to show what they are teaching in a real world setting. This gives rise to people saying 'when will I ever use this crap after I leave school?. In a job I had many years ago I had to help a guy set CCTV cameras up to monitor banks of slot machines for a couple of days whilst his assistant was out sick. Now how they used to do it was one would watch the monitor whilst the other would tweak settings and lenses on the camera. This seemed like a long winded way to so it. So I asked if we could try one camera my way, with that evening's beers riding on the success of my idea. I took the tape measure and measured the length of the bank on slot machines, the height of them, the height of the ceiling, and the angle of the lens' field of view. Then using a bit of trigonometry, worked out how far away from the machines the camera should be located, the angle from the machines both in relation to the ceiling and to the bank of machines. Armed with may calculations, I measured out where the camera was to be located and mounted it, used an old school protractor to set the angles and hooked up the cable. The only tweak we needed was to focus the camera and then agree to what time my colleague would be getting the first beer in. It took about 1/5th of the time they used to take and as far as I know, they're still using my method and enjoying longer breaks because they 'forgot' to tell our manager they found a quicker way to do the job. Even the strangest maths taught in school can crop up in every day life.

@malleusmaleficarum6004

5 жыл бұрын

I think you get it from ToT Universetony

"Separate the wheat from the chaff". Is that why you own a mill? :P

"I'm not talking about those out of square parts you usually make" Love it

I need to watch this video at least 4 more times. I have done a lot of machining in my trade over the decades without being formally trained and poor math skills. My desire to machine and create parts have overridden the skills I don't possess, and this lesson is incredibly helpful. Thank you for the lessons you teach.

I had no idea it was this simple..

@FowlerAskew

5 жыл бұрын

Here's a sweet GIF if you want to see everything visualized at once i.imgur.com/jbqK8MJ.mp4

@5000rgb

5 жыл бұрын

@@FowlerAskew I was thinking about that video, I'm glad you posted!

Did you just trick me into enjoying math?

"... until they're scrap. That's how I know I'm done." I laughed out loud 🤣😭 fr. Wish I learned trig from you at school 😘

Tony, trig is a very useful piece of mathematics, one I use regularly. I grew up in the time before calculators, and used sine, cos and tan tables and a slide rule in high school and through university.

I am sure you had an angle for this video but you did cover the subject quite well.

@weshowe51

5 жыл бұрын

He wants you to subScribe

@nakinajay

5 жыл бұрын

I see what you did there. Classic

great video...will have to view a few times as I smelled wood burning on my first run through....

@Blueshirt38

5 жыл бұрын

Really? I was smelling roasting almonds... I doft thnik itt a pro blrm thooufhh

@insAneTunA

5 жыл бұрын

hahaha I thought that it was just me who was smelling burning wood.

@grahamserle7930

5 жыл бұрын

I'm with you mate. Nice comment and I love your sense of humor. Personally I wasn't sure whether my head was spinning because of what Tony was saying or it was because of the alcohol.

@g-low6365

5 жыл бұрын

tell me about it. one run to translate it to spanish. another to understand the imperial units. another for the math and the last one to put it all back together

@mikedrop4421

5 жыл бұрын

@@Blueshirt38 Hwo strgane I haaad teh saem prollum..

This Old Tony, this video was friggin awesome. They need to show this in trig class!. Thank you for doing this.

Brilliantly explained. Plenty of humour to add interest as well. I wish my teachers had been as interesting to listen to. Thanks Tony.

For those that don't walk around with all this stuff on the top of their head, you put it very well. Next, you can show them how to use the exponent key to figure thepayments on their new haas super mini mill.

How dare you. I love that word! The unit circle defines me as much as it defines the relationship between angles and sides on right triangles. Coincidentally, I don't actually do any machining.

You Sir, have a gift for bringing life to dry concepts that should be the aspiration of professional educators everywhere but somehow isn't. Therin lies the fly in the conventional western didactic ointment. Anytime you find yourself at a loss for subject matter, a lesson like this would be appreciated. Thank you This old Tony.

By far the most valuable video for what I lacked in the machine shop ive seen yet. You explained it so well I actually understand what it means aswell as how to use it. Thank you!

Only co-sign I know of is when you buy a big ticket item. I asked my high school sweetheart if she wanted to get in the back seat,she said "no, I want to stay in the front seat with you."

@lifuranph.d.9440

5 жыл бұрын

It took a while to get it. HaHa!

i have a test on this tomorrow (or Tuesday, my teachers aren't good at telling us things). This video couldn't have come at a better time

@Bl4ckw0lf1

5 жыл бұрын

Let us know how you do on the test.

Thanks, Tony. Ya learned me somethin' that I fell asleep listening to 50 years ago. The lathe setup enlightened me, too. Keep the videos coming.

Fifty years after I did all this at school I realise that it was my teacher who was the schlub, not me! Brilliant, perfectly explained - thanks.

Nice simple explanation in a shop context. The use of the roundstock to keep the hypotenuse exactly the same when supported from below with a simple jack is pretty smart. I feel like I just watched a 3brown1blue video with really really good cgi.

"Cosine erorr" I like that little detail XD

@stargazer7644

4 жыл бұрын

That blinked by so quick I thought my eyes were playing tricks on me.

@borysnijinski331

3 жыл бұрын

Had to rewind to confirm what I thought I saw...clever humour!

HOLY COW!! 44 years after flunking Trig. I now understand Sine and Cosine! If I had just watched this video before that stupid test I might have been a physicist!

Tony - thank you so much for your wonderful teaching videos! You should get the "Teacher of the Year" award every year! Are you a rocket scientist in your night job? You are so smart. God Bless you and your family.

Now I finally know where sine , cosine and tangent are derived from. I wish my old maths teacher would have explained this as clearly as you just did. Thank you.

@keithnicklin8819

5 жыл бұрын

TOT. Do you stop to breath very often?.

@ThisOldTony

5 жыл бұрын

notimeforbreathing!

Came here for the TOT tangent. Was not disappointed.

one of the coolest explanations EVER on this topic. i have brushed shoulders with many instructors in many schools of thought, college full time at 15yrs old, trade school in California, IBEW trade school in Missouri, Technical school in Tennessee, and now a deep yerning to learn machinists theory and protocals considering all the equiptment i have aquired over the years for 'pipe-dream' projects. i have never heard such perfect, easy to understand, examples of trig functions...ever. WELL DONE. thank you very much for your videos sir. Precise, reasoning, humor, examples, ect., perfect mix.

Just this one clip has taught me more than i ever knew about accurate turning. Thanks

Keanu Reeves watches this video. “I know trigon o’metry”

@JinKee

3 жыл бұрын

"I met him at the sine bar"

It blows my mind that you(a hobbyist) are better at teaching math than my math teachers were... P.s. I dont normally comment but thought I'd thank you for all the laughs and entertainment you have given me over the years. So Thank you!

TOT - 1. Florida Public Schools - 0. Yet again you have done for me what 2 years of high school math couldn't do. I was trying too learn back then too. Thanks. Your self proclaimed biggest fan, John.

I loved Trig in school and still use it from time to time and I'm 72... And now that I saw the whole thing it is really interesting.... 2 thumbs up!!!

"Tony's Old Aunt Sat On Her Coat And Hat" - TAN = Opp/Adj; SINE=Opp/Hyp; COS=Adj/Hyp

@johncoops6897

2 жыл бұрын

Most people use SOH CAH TOA which sounds like an erupting volcano.

I don't understand sine language.

@Gottenhimfella

5 жыл бұрын

You probably would not enjoy Monty Python's semaphore version of Wuthering Heights.

@flatblack39

5 жыл бұрын

@@Gottenhimfella I had to check it out before I understood. Hilarious!

I memorized SOH CAH TOA. This has served me well my entire engineering career. Very interesting to learn about sine bars. I had no idea. I have no machining experience. Only your subtle humor makes me listen to 26 minutes of tirg. Nice job.

This is crazy. My grandfather was a machinist and I have a lot of his old tools now and he had a sine bar in amongst his tools and I never knew what it was used for and now I know. Thanks Tony!

Soo many videos lately! Definitely not complaining, just wondering... did you quit your day job?

@AgentKent

5 жыл бұрын

"My lathe is smarter than me" Fantastic content

@philbox4566

5 жыл бұрын

Yeah, he was a piano player in a whorehouse. Now he's just a fly in fly out dishwasher on an oil rig. ;)

@captcarlos

5 жыл бұрын

Not complaining ether, phunny as pharq! But, he probably has been able to quit his 'day job'. With over 1M subscribers (no doubt due to underhanded subliminal messages!) he shoul be getting quite the cheque from UT! Over 130k views of this one so far! Love it!!

@mikedrop4421

5 жыл бұрын

I don't think so. He spends whatever time needed to make the videos then fires up the Lathe and travels back in time as to not miss work.

Nice subscribulator you have there.

@jackiec7596

5 жыл бұрын

nice catch, I always forget to look for them.

@syncon303

5 жыл бұрын

it comes with tot function

@Garbaz

5 жыл бұрын

Missed that one

@Obsidian0Knight

5 жыл бұрын

@@syncon303 i thought i was going insane, he even changed tan in the book too!.

@21mph12

5 жыл бұрын

Funny. I saw the tot and arctot but missed the subscribulator.

Being an electrician sine-cosine are a description of alternating current!!! Your videos are both easy to watch and very informative!!!

Well! I now know how to use a sine bar.I was taught years ago,but it never sank in.Now at the age of 73 I understand it.Thank you Tony.

there was once a great hunter, he was married to a Cherokee lady that was every bit as great a hunter as him. every night they would make love on the skin of a hippopotamus they killed on their honeymoon. sadly she was killed by a couple of bears before they had any children. our great hunter of course killed the two bears and kept their hides. eventually he found love again in the arms of a sweet Apache girl. they would make love every night on the bear hides that had taken his first wife ,she was a terrible hunter but did produce a fine son who grew up to be as good as his father and his first wife. what does it all mean ?? the squaw rooted on the hippopotamus is equal to the son of the squaw rooted on the other two hides

@Ididerus

5 жыл бұрын

Was the squaw's name SohCahToa?

@ken481959

5 жыл бұрын

Excellent!

@gmortimer20031

5 жыл бұрын

Booooooooooo! :-) xx

@MrFirstcause

5 жыл бұрын

@@Ididerus wow, thats exactly how I've always remembered it too SohCahToa

@Michael-ij6kg

4 жыл бұрын

@Jim Alley Whats parochial?

Darn I really feel like I have learned something here! Thanks Tony!

I'm an apprentice currently and have to make some angled details at work monday, this should hopefully help me pretend to know what I'm doing with more confidence. Thanks!

I love how the "knucklehead" measurement is exactly how we measure televisions and monitors.

why the hell were you not my math teacher.... I finally get it now!!! Thanks Tony!!!

I'm actually starting to enjoy math now watching your videos.

Machining is wild. I have no idea how I found this channel, never wondered about machining, and now I've watched hours and hours of this guy. Awesome. I've learned more about Trig from this homie than I did an entire semester listening to an escaped USSR scientist in college. Had to teach myself the entire friggin' time and get my mind blown in 5 minutes by TOT

Outstanding! You are a natural teacher. I learned more from this video than I did in high school. Thank you!

"If you decide to start projecting yourself onto your triangles, just make sure you are doing it right" - @This Old Tony

My spine actually is tingling. Or I've been watching KZread too long and need to walk around a bit.

@isaacmadhavan

5 жыл бұрын

Vernon --> Same here!

"We learned something here today." -Kyle And, it reinforced for me why my Dad, the Engineer, always spoke reverently about individual machinists, with whom he interacted. Also, I should note that concepts and relevance discovered earning Surveying Merit Badge saved me when faced with High School geometry, algebra and trig. When I was in school, so much was apparently irrelevant. It wouldn't have taken much to tie it to usefulness, which would have helped with motivation and understanding. Thanks, Tony.

I have been working in the shop for about 6 months on and off and this really helps! WOW! Amazing content.

A heat treated sine bar was a school project while I was apprenticing. I wonder what became of it. Great memories of making it bud. Many thanks fella ! We did our math with no calculators. A time gone by eh. Great refresher bud.

@moyadapne968

5 жыл бұрын

It went into the black hole also containing my school project torque wrench.

This is the first time i ever understood any of this

To state the oblivious... XD... nearly 3 years on and I don't know how many times I've watched this and I'm still finding jokes... hats off, sir, hats off.

THANK YOU for explaining what Sine, Cosine and Tangent are! I've never had that explained to me before let alone what the relationship to angles are. I'm truly thrilled to FINALLY understand this.

Man, your subtle comedy is amazing! I was cracking up after that backseat joke!!

5 years of high school and I learn trig in 25 mins. Thanks for wasting 5 years.

@igorbarbarossa

5 жыл бұрын

Dafuq, forgive my ignorance by why did you spend 5 years in high school?

@brocksdaddy081910

5 жыл бұрын

Igor Barbaros hahaha I was going to agree that I learned more here than in high school but that was funny

@shawnhuk

5 жыл бұрын

@@igorbarbarossa - heh. In Ontario back in 2002 we had gr 9-12 and OAC. www.google.ca/url?sa=t&source=web&rct=j&url=en.m.wikipedia.org/wiki/Ontario_Academic_Credit&ved=2ahUKEwj20ebMlZPfAhURrYMKHV6IACwQFjAAegQIAxAB&usg=AOvVaw0hSLoKDtpllCDzdYxoOOls

@igorbarbarossa

5 жыл бұрын

@@shawnhuk understood. Thank you for clarification sir

@ThePetalesharo

5 жыл бұрын

@@igorbarbarossa didn't everyone?

Thank you so much for spending your time to educate us, highly appreciated.

When you took it to the lathe.. mind blown. Thank you for the great video!

Yo don't forget to tell people about degrees and radians on that calculator machine. You'll get wildly different answers

@jimc3688

5 жыл бұрын

Yeah, lots of calculators use radians as the default.

@TheAmpair

5 жыл бұрын

@@jimc3688 It saves confusion between degrees C and those F ones.

@FowlerAskew

5 жыл бұрын

If you want to get real funky, throw gradians into the mix

*This Old Tony* I loved the angle on the lathe to get an accurate "half division". Cool!

@truckguy6666

4 жыл бұрын

There is so much brilliant explanation of useful math in this video, I dont know how it could be improved. Machinists and woodworkers alike can put this to use. TOT is the best on youtube.

Thank you....coming from a younger wanna be machinist......I managed to watch every second of this video, then I noticed 800k people watched a video on a sine bar....now I have a little more faith in this world

some of this went over my head, at about 17:09 I'm gonna have to watch this video several times. The first part was very eye opening. I remember taking Trigonometry in college, I could never could get thru it, and I wasn't exposed enough to it in high school, or just wasn't taught well, back in 1982. when I went back to college, in 1992, I was still lost, and had to take rudimentary math again, to get back into the game. I have never had any instructor, who had the ability to teach this subject like Tony. Visual aides help a lot, with today's technology, it should be easy, but I suspect teachers are still using antiquated techniques to teach this subject. I want to learn this again, I'm 56yo, it may take me longer, but damn, Tony makes it very interesting. I'm enjoying this so much!

You’ve inspired me to pickup my old Trig books and try to relearn. Been putting it off for years.

@askquestionstrythings

5 жыл бұрын

I found the Khan academy website, it has done wonders for relearning all of the math that I should have learned in k-12 education.

@justiceforsethrichwwg1wga160

5 жыл бұрын

Ask Questions, Try It Thanks for the tip! Gonna install their app today and give it a try! Looks like they have all kinds of courses. Awesome! 🙏🏻

@bc7443

5 жыл бұрын

You guys should checkout the channel 3blue1brown, one of the best math channels on youtube by far.

A 26 min youtube video did a better job teaching me trigSHOP MATH than a year of study in high school.

@QlueDuPlessis

5 жыл бұрын

You only did one yeah of trig in High School? Back in the Eighties we had 5 years of High School and trig was part of the syllabus every year. (Full disclosure, I took Mathematics right through Matric)

Where would i be if i watched this video 36 years ago. I just now understand and am excited to go to math class tomorrow! Im definitely going to file this under future starting video for grandson pre highschool math class! Thanks from one old man to another 🙏

This brings back memories of high school related class. RIP Mr. Levesque you were a good teacher. Wouldn't be able to feed my family today if it weren't for you. 🤘