Let's get 3D! If you want to learn more about printing with puff ink, check out this article: scrnprntl.ink/FNINK_Puff

Say puff one more time ...lol...we love you ryonet .

@Ryonet

2 жыл бұрын

....puff! LOL!

Thank u for sharing the info 🫡🫡🙌🏼

@Ryonet

Күн бұрын

Glad to help!

Hello i am struggling understanding what 10-20% of the weight . Do you guys have a video of making the mix?

@Ryonet

9 ай бұрын

No worries at all, you'll just need to pick up a gram scale! Tare the weight of your container, then add your ink, then tare again and add 10-20% of your ink weight. I'll work on a video for you!

Thank you so much

Can I use the FN puff additive with wilflex ink?

@Ryonet

2 жыл бұрын

Hi @Alan Phung! you certainly can experiment with it. However, FN-INK has that lower cure temp, including the PUFF. The cure temp of LAVA may be too hot for the FN-INK PUFF.

great video thanks

Can you use puff additive when making plastisol heat transfer? Or will the pressure from the heat press keep the ink from rising?

@Ryonet

Жыл бұрын

Hi @Richard Effingham. Great question. I believe that it would get smashed in the heat press. you may get a very small amount of loft. Hope that helps.

Oh so washing a puff print, and seeing if it stays or falls out is a good indication of how it cured?

@Ryonet

Жыл бұрын

Hi! after cure and a rest period to let the ink completely cool down, you can do a gentle rub test and a small stretch test (puff doesn't stretch well) to see if the ink layer is stable. However - A wash test is closest to a gold standard for testing.

Very informative! I only have a flash dryer - is it possible to achieve the same results without a drying belt?

@Ryonet

Жыл бұрын

For sure! You just gotta keep a watchful eye on it and record your times to keep it consistent 🤙

@fieldtriip1566

Жыл бұрын

@@Ryonet thank you for the response i’ll try it out!!

Can we do this on an auto press? Or is this a better off on a manual press? This definitely is something I'd love try here in the States

@Ryonet

2 жыл бұрын

Good morning @carsen howell. you can do this on either. Honestly hinges more on cure temp and the cure temp of all your other inks in the print.

Do you use a stretch base with puff

Can a smoothing screen be used when doing white on black

@Ryonet

Жыл бұрын

Yes, absolutely!

Where to get your product in USA and In India please send Adress

@Ryonet

2 жыл бұрын

@Mukund daga check us out on screenprinting.com. We can ship to a freight forwarder if you are international or you can schedule pick up with us. THANKS www.screenprinting.com/

Can Puff additive be added to Silver metallic ink?

@Ryonet

Жыл бұрын

Hi! Yes you can add puff to FN Silver, but when it puffs you can loose more or less of the silver reflection. The puff can cover up a lot of the flake that gives you the silver look. Alternately, you can print puff under the silver and that will allow you to keep much more of the silver metallic effect.

can i use a flash dryer for the whole cure process?

@Ryonet

Жыл бұрын

It can be done! There are important variables to consider when curing with a flash. Check out Colin's tips and tricks here... www.screenprinting.com/blogs/news/how-to-cure-via-flashing

@joenevarez1938

Жыл бұрын

@@Ryonet Thank you so much!!! i can move forward with confidence now :D youre the best!!!

Too much information without any demonstration

@Ryonet

Жыл бұрын

There's a great demo about 1 min in! Also check this out...www.screenprinting.com/blogs/news/take-your-prints-to-the-third-dimension-with-fn-ink-puff