A Detailed Guide to Mastering Jesmonite AC730: Mixing, Pouring, Brushing, and Acid Etching
Тәжірибелік нұсқаулар және стиль
Jesmonite AC730 is a versatile and durable material that can be used as an alternative to concrete and GRC for a wide range of applications. In this detailed tutorial, we will show you how to mix and pour Jesmonite AC730, as well as how to brush and acid etch it for a variety of creative projects.
Jesmonite India Facebook Group: g/p_87Q8kxD4ArtupgoJ/2Q...
Jesmonite AC730 is suitable for sculptural works, architectural features, and interior design elements, and can be easily colored and finished to achieve the desired look and feel. It is also lightweight, fire-resistant, and waterproof, making it an ideal choice for many different applications.
Jesmonite AC730 Kits: bohriali.com/products/jesmoni...
Jesmonite AC730 Trial Kit: bohriali.com/products/jesmoni...
To mix Jesmonite AC730, you will need the following materials:
Jesmonite AC730 powder
Jesmonite AC730 liquid
Mixing bucket
Mixing paddle or a High shear blade
Measuring cup
First, measure out the desired amount of Jesmonite AC730 powder and place it in the mixing bucket. Next, add the Jesmonite AC730 liquid slowly and mix the two together with the mixing paddle. Make sure to mix the Jesmonite AC730 thoroughly to ensure a smooth and consistent consistency.
Once the Jesmonite AC730 is mixed, you can pour it into your desired mold or form. Use a brush or spatula to smooth out the surface and remove any air bubbles. Allow the Jesmonite AC730 to cure for the recommended amount of time, usually 3-4 hours, before moving on to the next steps.
To create a brushed finish on your Jesmonite AC730 project, use a fine-bristled brush to gently scrub the surface of the material. This will give the Jesmonite AC730 a textured and slightly rough finish that adds visual interest and texture.
For an acid-etched finish, you will need to mix a solution of hydrochloric acid and water in a safe and well-ventilated area. Using a sponge or brush, apply the acid solution to the surface of the Jesmonite AC730 and allow it to react for the recommended amount of time. Rinse the Jesmonite AC730 thoroughly with water to neutralize the acid and remove any residue. This will create a smooth and polished finish on your Jesmonite AC730 project.
With these steps, you can create beautiful and unique creations with Jesmonite AC730. For more inspiration and to keep up with our latest projects, follow us on Instagram at / bohriali and on Facebook at / teambohriali .
#JesmoniteAC730 #detailedguide #stepbysteptutorial #concretealternative #GRCalternative #sculpturalworks #architecturalfeatures #interiordesign #creativeprojects
Пікірлер: 30
Amazing..great vid for beginners!
@BohriAli
Жыл бұрын
Thanks for watching! Do let us know if there’s anything else you’d like us to cover!
Hey 👋, thank you for your video,i really like the shiny look finishing before using the acid. i tried to get the same result non succefull , what kind of silicone mold do you used? I am using mold stsr 30 and i didn't like the results, can you please let me know ? What kind of siler do you us ? Thank you
What is the name of the acid you are using to make the texture rough?
Does this resin float in water. after curing
Which acid used
Absolutely beautiful projects...could you pls tell us from where we can procure that beautiful silicone tile mould which had Mughal flower pattern which you showed towards the end of the video where you were pouring water on it....just checked your website, this mould is not listed. Thank you...keep up the good work.
@BohriAli
Жыл бұрын
Hello! It is a custom made mould made for a specific project :) It isn't available for sale at this point. Thanks for commenting :)
@pragyavashisthnayak
Жыл бұрын
@@BohriAlithank you for responding...would you consider retailing this mould in the future.
Please let me know what material you use for making
Καλησπέρα ❤ Μπορείτε να με πείτε τι υλικά χρειάζονται για να γίνει το καλούπι και τις αναλογίες; Ευχαριστώ πολύ ❤❤❤
Is it necessary to apply acid after its cured? Can we avoid the acid if we like the smooth cured product?
@BohriAli
Жыл бұрын
Yes! The acid is only for the rough stone finish!
Which Acid you used for etching?
@BohriAli
5 ай бұрын
We’ve used Hydrochloric Acid!
Aisa Kyon ho raha hai ab mai kya karun use sukhane ke liye
Hindi me bhi video hai sir
Mera resin pura Sukh Gaya Hai per thoda sa side se Sukha nahin hai aur vah likh kar raha hai to Kaise Rakha Mein use 10 Din Se Rakhta hun Fir Bhi Nahin to Khada Hai please bata dijiye frame h
@BohriAli
Жыл бұрын
Ek side se nahi sukha hai, iska matlab yeh hai ki resin aur hardener theek se mix nahi hua hai.
@yanshipriya6631
Жыл бұрын
Oooo
@yanshipriya6631
Жыл бұрын
ab kya kar sakte hain Kyunki vah frame hai
@yanshipriya6631
Жыл бұрын
kya mai use fridge mein rakh sakti hun
@yanshipriya6631
Жыл бұрын
Thank you so much reply dene ke liye mujhe bahut din se samajh Nahin a rahi thi ki Main Kya Karun
Hello, can you’re video be translated into Arabic, please?
Bro maine order kya tha but avi v muje mila nahi or nahi koi order status show karra hai
@BohriAli
Жыл бұрын
Hello, please can you email us with more information on support@bohriali.com so that we can help you better!
@uzmaahmed8205
Жыл бұрын
Bro maine already mail kya hai
@BohriAli
Жыл бұрын
We’ll get a team member to call you back today! Thank you for your patience
@uzmaahmed8205
Жыл бұрын
@@BohriAli thank u
@uzmaahmed8205
Жыл бұрын
@@BohriAli apka team se koi v call nahi kya hai