A Complete *Updated* Build Rundown of my 560WHP Turbo M50 BMW E34 | Every Detail
Автокөліктер мен көлік құралдары
Looking to turbo your BMW E34? Look no further because today I've decided to make an updated build overview of my turbo M50 BMW E34 5 series. A few things have changed with this car since the last overview. I go over every single aspect of the car from turbo specs, engine specs, drivetrain mods, fueling, cooling, etc. I also added in the total cost of this build at the end!
Пікірлер: 139
This is one of the most solid and enjoyable of that era. . My M5 E34 after tuning was 400Hp and very reliable.It sounds so sweet @ 3500rpm+ I would not dream of putting a turbo in it. Your car is a Rare Gem!
@m3nameisjosh464
Жыл бұрын
Definitely agreeed man!! They are great. Thank you!!
@petepenn1
Жыл бұрын
@@m3nameisjosh464 BTW your perseverance + passion is what sets you and your car above the rest. Critical qualities that will turbo charge your life experiences. Rock on!
@m3nameisjosh464
Жыл бұрын
@@petepenn1 thank you man! I really appreciate that!
@camialeh
5 ай бұрын
@@m3nameisjosh464 am bout to buy a e34 but is has 300k km, is in excelent conditions but im afraid that the engine is in mid/late life, what could i do to prepare it for a turbo?
@m3nameisjosh464
5 ай бұрын
@@camialeh engine out and can do a full rebuild, or just turbo it as is till it lets go, youd be surprised how long it might last
nice work bro, honest man, honest car, luve it :)
i be watching these videos in the family living room, and idgaf, fye content as always
@m3nameisjosh464
Жыл бұрын
Appreciate you bro!!!!
I turbo converted my E36 325 back in the day. That was mighty expensive! So I can confirm the high costs and the hard work! But so worth it if you want a really fast car.
@m3nameisjosh464
Жыл бұрын
Yesssir!!
I feel your pain remaking it over and over again, my E30 M50 Turbo is the same story and i would still change things, lovely car and very enjoyable video to watch, massive thumbs up!
@m3nameisjosh464
Жыл бұрын
Thanks man!!! Yeah its all a learning process!
Beautiful e34. Love this color. Totally true on buying a old car and not working on it yourself, it's going to cost a lot of money. I had a friend who wanted another e30 but didn't work on them and relied on me. I told him dude I'm moving who do you expect to work on your car if you don't got a deep wallet and he was like idk. I just convinced him not to get a old car if he's not going to learn to wrench.
@m3nameisjosh464
Жыл бұрын
Dude I’ve been there with so many non car knowledgeable friends, like i cant be a personal mechanic for them lol
Good job ❤
wearing ur e36 hoodie watching this cant wait to get a turbo on my s50 e30
@m3nameisjosh464
Жыл бұрын
Ayyyyy! Thats awesome!!
your vanos is bianary. just a on off switch. You could run it soooooo easily with stand alone. Just have it turn on and off at set rpm,s ..... Its got to be the easiest thing you could do with a stand alone. I know you would need a tune adjustment, but your talking about way more power under the curve. fwiw vanos usually turns on just off idle , turns back off at 4100. not untill dual vanos came out its variable in the us. ( I think the euro s50 was actually the first variable vanos) vanos only hooks up one way , but the clip has a + and a - sign on it. (hook up vanos back words fries the switch ) Your tial blow off is a 50mm. your vw breather is for a tdi, fcp sells them for less than 20$. What mac valve(boost controller) is that? I've never seen one that brand.
@m3nameisjosh464
Жыл бұрын
Goood to know! Thank you! I figured its not difficult, these tuners are just so stubborn with that stuff, and I dont even have a laptop with ecu master software to mess with it myself. I definitely will find someone to initiate it though, i need that vanos help for spool. Not sure on boost solenoid, tuners installed it. Called a WHP?
@fiekiejay
5 ай бұрын
VW OEM part nr - 06A103465 - oil cap breather
Hopefully I will swap a M50b25 in my e30 one day, these engines can hold power using stock parts its crazy
@m3nameisjosh464
6 ай бұрын
Best motor ever
I´m setting up to tubo my e36 325i, same motor, so your video was really helpful, thank you for this straight to the point clear video! can you tell me how many miles your engine has? have you rebuilt it when you changed the head gasket? or it has stock pistons and stock bearings?
@m3nameisjosh464
8 ай бұрын
all stock bottom end, no rebuild.
Love that it's mostly stock (manifold, cooling system, driveshaft etc)
In the middle of a NA E28 M30B35 build but man I would love to do a turbo m50 e36 sometime. Seems like it would be stupid fun in such a light chassis.
@m3nameisjosh464
2 ай бұрын
Not the lightest chassis, but definitely fun
I've been watching your videos for a while, really love this car. What was your reasoning for swapping to an M50tu? I've heard so many good things about the internals of the M50nv.
@m3nameisjosh464
Жыл бұрын
I didn’t want to go standalone ecu at first, and figured m50vanos can be tuned stock chip while m50nv cant. Learned that obd 1 tunes for turbo dont work well either way
@silverstone2898
Жыл бұрын
@@m3nameisjosh464 Ah that makes sense. Well at least you have vanos now, lol. And clearly the m50tu internals are plenty strong. I've got a m50nv, hoping to put it on a standalone and turbo it sooner or later.
@rossshkromiuk1574
8 ай бұрын
@silverstone2898 same here got the m50nv. Any tips?
@silverstone2898
3 ай бұрын
@@rossshkromiuk1574 The M50s biggest weakness in my opinion is overheating. Don't be cheap, replace your water pump, tstat, hoses and rad/expansion tank. If you're referring specifically to turboing it, you should be okay with low boost (
I just bought a 525i because can you personally show me where you get these parts from
Nice one bro, im doing de same on my e39, where you found that oil cap breather ?
@m3nameisjosh464
Жыл бұрын
Volkswagen oil cap breather
Hey I’m trying to find that video of yours where you mention a new intercooler or some kit to keep the oem front bumper look. Or am I misremembering
@m3nameisjosh464
Жыл бұрын
A few videos before this!
Awesome build! How many miles have you put on it with that much boost? I am building a 91 525i right now with pretty much the exact same set up so I am very curious how the engine is handling it.
@m3nameisjosh464
Жыл бұрын
Id say a good 500 hard driven miles, had to put car away for winter so didn’t get too much driving in
@kyleschlegel6524
Жыл бұрын
@@m3nameisjosh464 Gotcha. Im getting ready to order some turbo Cat cams for my build. I just got the CES copper spacer and cut ring gasket set in the mail 🤪 If you could choose any turbo, which one would it be factoring in everything youve learned?
How much are those wheels going for . I like them
Great build! How many psi is your wastegate spring? I have a gt3078 turbo and 650cc injectors and 12psi spring wastegate on pump 93 gas. I will take it to the dyno in 2 weeks. How much hp you think I would make?? M50b25 also stock internals. Ms3 Pro ECU.
@m3nameisjosh464
Жыл бұрын
I honestly can’t remember my wastegate spring pressure. But at 12psi probably 350-400ish
@mrkandasmagicmusings2464
Ай бұрын
Sounds awesome!! I'm looking at doing the same set up in mine. What were your numbers?
my e34 525i is a M20 engine is M20 good to tune with ?
Monster machine bro. Question tho, what's your thoughts on an e39 twin turbo v8(m62/s62) build? Is it feasible?
@m3nameisjosh464
Жыл бұрын
Im sure its feasible, but likely very expensive. V8 turbos are no joke!
@nathanarneaud5666
Жыл бұрын
I could imagine. Would you ever consider making build like that in the future? 😅
@m3nameisjosh464
Жыл бұрын
@@nathanarneaud5666 maybe once im rolling in youtube money!;)
How is it holding all that hp on stock internals? I heard the connecting rods are good but people say you need forged pistons for over 450hp and maybe a forged crank if you going over 500. Have you had any problems with the internals?
@m3nameisjosh464
4 ай бұрын
Nopeee. Good tune is all that matters. Rods are good for 600 torque 650 wheel
Would you recommend Rktunes as a good tuner for M50s(I know you said you aren’t tuned by them but just wanted to see if you have any experiences with them), I’ve heard mixed things like it can be a hit or miss but I’m not sure if I should, what do you recommend?🙏🏽
@m3nameisjosh464
Жыл бұрын
This car was rktuned at the beginning and couldn’t get it running right. For obd 1 turbo the only option is a standalone, otherwise don’t waste your time. For a NA tune i have rk on my s52 car and its awesome.
@jorgenieto1283
Жыл бұрын
@@m3nameisjosh464 okay so since mine is obd2 it’ll be way better right? I was gonna do the whole swap harness to obd1 with the link g4x but may just do that later on and see how rktunes treats me, thanks!
@m3nameisjosh464
Жыл бұрын
@@jorgenieto1283 rktune obd 2 tune is fantastic, my buddy makes 500 wheel on a stock m52 with his
what would you say the one time cost of your current 560whp setup is, not including iterations?
@m3nameisjosh464
Жыл бұрын
About 10kish
bought a 95 calpyso 525i turbo is the end goal
@m3nameisjosh464
Жыл бұрын
Good luck bro!
stock internals in this engine? are stock internals forged pistons? are there nozzles in the crankhouse for oiling under pistons on this engine? I can't remember what it's called.
@m3nameisjosh464
4 ай бұрын
Not forged pistons, no oil squirters either
I got a e34 touring for free was a salvage car got hit in the tailgate only cost was I had to pull the m50 and Trans lucky I got a ford 302 and t5 Trans but I'm gonna do a twin turbo. My only concern is this is gonna be my racecar/driftcar so any tips on the steering system/suspension?
@m3nameisjosh464
Жыл бұрын
Nice! But i have a full suspension refresh video on one of these cars discussing what i like to do for suspension. Steering stock is fine
@njdorset1050
Жыл бұрын
@@m3nameisjosh464 thanks the owner gave me another spare tailgate and gas tank and it is getting full racecar treatment (custom made parts, body panels etc) but it's my introduction to everything bmw so I'm just doing research but there isn't much about racing these cars
Got a 92 325is non vanos. Should I get a megasquirt or VEMS standalone?
@m3nameisjosh464
8 ай бұрын
Vems is probably more refined. But Megasquirt works fine
Dream. Engine was rebuilt before putting on the turbo?
@m3nameisjosh464
Жыл бұрын
Nope. All original
maybe this would cost more, or take a shitton more time to do than an engine swap. But I just got one of these for free and I love building and modding, WIll def take some notes from this vid, Thanks for not engine swapping, thats too easy :D
"tuners" cannot switch the damn flybacks to make that vanos work with emu !
Nice build. Thanks for sharing. I have an e34 with an M50B20 that I'd like to turbocharge though I'd prefer an M5*B25 but they're rare in my area. Is the Precision 6262 turbo in this video too big for a 2 liter engine or is it suitable for both? It would be nice if I could use the same turbocharger for both engines just in case I come across an affordable M5*B25 later.
@m3nameisjosh464
Жыл бұрын
6262 would be good for an m50b20 id say!!
Hey josh I was just wondering if you could supply a link to the Cometic headgasket? And is it .120 or .140?
@jorgenieto1283
Жыл бұрын
Also did you have to do any prep to the block/head before installing the new gasket?
@m3nameisjosh464
Жыл бұрын
www.cometic.com/products/C14010-142 Always get head resurfaced. Block resurfacing is nice but a good cleaning works
@jorgenieto1283
Жыл бұрын
@@m3nameisjosh464 thank you so much bro! It says bore size is 85mm but stock m50 is 84 is it fine like that? Sorry for all the questions bro but I appreciate the help
@m3nameisjosh464
Жыл бұрын
@@jorgenieto1283 honestly didn’t notice that, im not sure, my mls came with my engine, so i really have no clue where to get the right one
ever find the part number for the oil cap breather?
@fiekiejay
5 ай бұрын
OEM part nr - 06A103465 - from a 2.0 liter gasoline VW, fits in the oil fill cap location on the valve cover assembly. The oil cap attaches to the top of the breather, and it allows a second breather location for the cylinder head. Additional cylinder head breathing can be beneficial in highly modified TDIs, as it will reduce pressure in the cylinder head and allow oil to more easily flow to the head and the turbo. Most people use this modification with some sort of a catch can.
Strange how you feel like that’s enough brake I have a 540/6 and sometimes I feel as tho it’s not enough and the cars stock but on nitrous
@m3nameisjosh464
Жыл бұрын
People always complain about brakes, idk man I just never felt like the stopping power wasn’t enough, but its also not a cornering/track car
@paydroguapp
Жыл бұрын
@@m3nameisjosh464 I also didn’t factor the extra weight I have up front and probably all around which would probably make it make sense why they’d function better on that model
CAN U SHARE UR TUNER INFOS ?
Yeaaa ok imma have to go m50. Got any engines or trannys?
@m3nameisjosh464
Жыл бұрын
Not currently 🥲
do you think that Vw crankcase breather would fit an m60?
@m3nameisjosh464
Жыл бұрын
As far as i know the oil fill cap is same on m50 and m60 so yes it would
@ahmadsuliman7739
Жыл бұрын
Hopefully it’ll clear when shutting the hood. Im going to try it out. Thanks and great video!
@m3nameisjosh464
Жыл бұрын
@@ahmadsuliman7739 thank you!
Give that color the credit it is due! Calypsorot Red!
@m3nameisjosh464
9 ай бұрын
The best color
Can we get an acceleration video josh? I've asked before and I know it's just wheelspin at low speeds but could you do it? Pleeeeaaaaaseee?
@m3nameisjosh464
Жыл бұрын
I’ll have to do it after winter🥲
Im gonna be running m50b28 e34 touring around 800whp
@m3nameisjosh464
Жыл бұрын
Niceee
Where you find the turbo manifold?
@m3nameisjosh464
Жыл бұрын
Came with my engine
Whats the ECU ? Speeduino?
@m3nameisjosh464
Жыл бұрын
Ecu master
Did my turbo build on my m52b28 for 1300$ did all the work myself tho
@iphonex5096
Жыл бұрын
What’s your snap or instagram if you have one I have a e34 with a m50 head and m52 bottom end and I’d love to know your build I can tackle the build myself also
@byronvontreal7046
7 ай бұрын
Ig @?
That turbo,hot and cold side is just a big restrictor in a too small package. Hot side AR 0.96 and cold side 0.70,and you will have a MUCH more enjoyable engine.
@m3nameisjosh464
10 ай бұрын
I know i need a bigger exhaust housing, but its fun for what it is
@concretesub8253
10 ай бұрын
@@m3nameisjosh464 sure,but you have no idea of how much more fun,you now are missing out on,by using that restrictor. Please throw some more cash at it,you will not regret!
@concretesub8253
10 ай бұрын
@@m3nameisjosh464 i said 0.96 hit and 0.70 cold,bu the more i think about it,i would give it AR 1.00 hot and 0.75 on cold side. Just trust me.
Is it still running good till this day?
@m3nameisjosh464
2 ай бұрын
Yes check my recent video
Is there any way I can keep my AC if I drop a turbo in my e34?
@MendukoArgento86
Жыл бұрын
You would need custom ac lines
@joelysuggs
Жыл бұрын
@@MendukoArgento86 yeah that’s what I’m finding out. Have you done it?
@MendukoArgento86
Жыл бұрын
Not yet, I gotta take it to this AC place where they do all that, i gotta tune the e34 still..once I get it tuned and drivable then ill take care of the AC
Not me skipping the engine stuff cuz I’m researching the v8
How hard is it to manual swap these
@m3nameisjosh464
Ай бұрын
I have a few videos! Its not horrible, not fun
You dont run an oil cooler? Im building a stroker e36 and wondering if its even nescessary. Under normal circumstances if you are able to cook the oil on the street you're going to jail, but i dunno
@m3nameisjosh464
5 ай бұрын
I see no reason for an oil cooler on this setup
@placeholdername3206
5 ай бұрын
@@m3nameisjosh464 You have never had problems with oil temp on the street? Ever had it get hot? Do you measure it? Just wondering if I should even bother
@m3nameisjosh464
5 ай бұрын
@@placeholdername3206 never had oil temps or engine temps get hot at all. My buddys turbo e36 is the same way. Street driven/drift car. Only hard track abuse raises oil temps beyond normal
Anyone around here willing to guide me on my e34 turbo project 😅 ! Willing to pay
ZF manual? ..or Getrag?
@m3nameisjosh464
Жыл бұрын
Zf I thought i mentioned, maybe not lol. Getrag would be confetti by 300wheel
@claytonhaske
4 ай бұрын
@m3nameisjosh464 even a 260?
Manifold?
@m3nameisjosh464
Жыл бұрын
Obx e36
куда пропал русский перевод?
Doosh works 😂
@m3nameisjosh464
Жыл бұрын
I said it wrong??? Whooops🤣
@Moshforthekill91
Жыл бұрын
@@m3nameisjosh464 doy-tch. Your street Cred is still valid 😤
@m3nameisjosh464
Жыл бұрын
@@Moshforthekill91 🤣🤣🤣 thank you!
The poo shiesty special
@m3nameisjosh464
Жыл бұрын
AGAGAGAGA
That ain’t that power. Chat crap
Bro, Why does your voice sound so much like Ryan Gosling?😂🔥👌🏻
@m3nameisjosh464
Жыл бұрын
Ive never gotten that before hahaha, but ill take the compliment!
I really enjoyed watching this video, please make more!!! Your content deserves a service like Promo>SM!!
@m3nameisjosh464
Жыл бұрын
Thank you so much man!