I'm a JCM800 2203X user and recently bought the JIMS 800. I LOVE IT. I needed a buckup for my amp, in case something went bad, but now i'm thinking as a replacement on some gigs.

I've had the Jims800 for over a month now - its a great Marshall JCM800 pedal. I no longer need to bring my Marshall DSL50 or DSL40CR amp to band IEM rehearsals and also bring it to all my gigs as an amp backup. The boost is really great sounding.

I bought a used 2203 years ago and rehearsed with it for a few hours. Plugged it in to play a gig and maybe 15 seconds into the first song, and a couple of the caps blew. It was pure Spinal Tap. Never had a pedal go up in smoke before now. :D

I owned a 1978 JMP 50 Mk II back in the 90's and WOW! does that pedal sound like that head. I'd like to hear what it does through a cab to hear (and feel) a little more of the effect it would have in that sense. But in a recording environment, that sounds 1 to 1! Well done TC! Edit: Just bought one from Sweetwater! Great price. Can't wait to check this out!

I could correctly tell which one was the amp, and which one was the pedal, but only if I listened to them one after one. If I sat in a room with eyes closed, and listened only one sample, I would have a fair chance to fail. The difference is insanely slim. This video is very convincing. Dear TC, which of Your ampworx pedals do You consider as the best pedal platform? Not with sterile clean sound, my basic clean tone is somewhere above the breakup point. I like to experiment with OD stacking, fuzzy sounds for heavy/stoner rock. My current solid state amp's modelling preamp is half decent, that's why I'm after a preamp pedal. Thanks for the advice!

I have had the Jims 800 for a while now. It is a great pedal. I sold my jcm800 in the 90's and they are to pricey to buy another. The pedal gets the job done for me.

TC is the best

Very cool guys. I love TC electronics stuff. I may have to buy this one or the Rectifier model. I play mostly hard rock and blues hard rock, and the jcm 800 version will be about perfect. The nice thing is I can go to FOH because everywhere I play its required usually no amp or silent stage. So, this and a few pedals would be great. I just have to decide which one I want. Thanks guys. Great video and demo. Very imformative. ❤❤ Best regards from a customer who loves TC. ❤ Regards from South Central Indiana. The heartland. USA Tim.❤🤘♥️🤘

That Frenchie saved this whole demo.

NOTHING EVER SOUNDS BEST ON KZread.

Great pedal. Def get my ac/dc jam fix with it!!

I wish you could do one based on the rockverb from Orange....

What guitar was that I couldnt tell because of the blurred headstock. Damn cool sounding pedal though!

@JonasKarst

7 ай бұрын

Has to be a Gibson Custom Shop 💪🏽. I think the player is Christian Trebbien. He makes KZread Videos where he also plays that guitar ✌🏽

@JonasKarst

7 ай бұрын

Or you are probably just kidding. I just saw your channel. You most defenetly know it’s a Gibson 😂😅✌🏽

@RiloRox

7 ай бұрын

@@JonasKarst haha yeah i was kidding, thats pretty obviously a gibson😂

@k.bizzle

Ай бұрын

Fender.

How would this fair if i wanted to create a ampless 'Superbass/JCM 800 Bass series' for bass?

At the end he said "now we've tried all three" but I can't find the video on the Dual Wreck, only on this one and the 550. Where's the video on the Dual Wreck?

@cnoberachus

5 ай бұрын

Hey :) You're correct and I can tell you that there is a video of the Dual Wreck, but sadly we were asked not to show that one.

Can this be used like a distortion pedal in front of a combo amp with no fx loop or direct out? Or only direct or in fx loop?

@MrGul

5 ай бұрын

It can, but the resulting effect is like blending two amplifier tones together (first the amp tone of the Ampworx pedal and then the amp tone of your actual amplifier) so it won't sound as close to a JCM 800 when used like that.

@thomasbowers5773

2 ай бұрын

The best way to run these pedals is straight into the amps fx return....in the loop it overloads the preamp at volumes higher than 9 oclock. In front of the amp it is thin harsh and tinny...but straight into the power amp section it is awesome

Why are yous blurring the Gibson headstock out?

@jefft5854

7 ай бұрын

Because of Gibson's somewhat over-the-top copyright policies ;)

@TheCleaner6969

7 ай бұрын

@@jefft5854 OMG... Things are really out of control these days.

I bought this pedal a few days ago.. and I really, really, really tried to like it.. I plugged it from DI into a FRFR, from OUT into the front and also the effects loop of 3 amps and also into the front of the Bam 200 with a cabinet (like on the other video ).. Here is my experience: - Into the FRFR with the DI out - it's not bad - I can get good sounds, even if a a bit muffled, and even after the update. My Marshall TSL601 gets better fuller thicker chunkier sounds. I do have to say the clear channel sounds good, especially with the plethoras chorus, reverb, delay afterwards. The distortion channel sounds a bit compressed, bass, boomy sometimes. But overall for DI-out I though it was ok, I would use it if that was my only set-up.There was a little bit of pedal noise on high distortion, but not terrible. (btw, on the video above I could guess which one was the amp on all instances, I am quite sure this was recorded by DI as it had that bit compressed feeling like the one at home vs my Marshall TLS601) From the OUT - this is a completely different story.. and a complete fail: - From the OUT into an amp - impossible.. the output is so hot that it completely distorts the preamps of the amps. I needed to lower the volume to be at 1-2 and it then it sounds tiny.. I tried 4 different amps -2x valve, 2x SS - no difference. - From OUT into the BAM 200 and into a cab - the overload was also massive - the noise and hissing from the pedal was so loud that I could hear it over loud distortion. I tried with different guitars too, single coil and Humbucker, properly isolated, etc.. no difference. - From OUT into the Power amp - through the effects loop - similar - the hissing was very very loud.. some electronic hisses on top of the normal hisses sometimes, and the sound was very trebly almost zingy, it just hurt my ears. It didn't matter where the knobs were, even after cutting all the treble. This is after the firmware update too. I tried as single pedal on the loop, also 4 cable method with the plethora where I could add a noise gate. No good! I don't really know where all these amazing sounds and comparisons I hear on KZread come from. This is not my experience. Maybe I have a defective unit.. but this JIMS 800 is going back. It is a really beautiful pedal, I really wanted to integrate it into my pedalboard to get the marshal sound with another amp.. but it was very disappointing.

@FacFerSch

3 ай бұрын

I currently use the Jims800 with a Fender Hot Rod Deville and it sounds awesome! Guitar> Jims800 IN > Jims 800 OUT (no IR) > Deville Power Amp IN. Thats the correct way if u wanna use it with a real amp with a guitar speaker. If you put it through the effects loop and plug your guitar into the input of the amp, then you will be stacking 2 preamps. Not a good thing.

Does the JIMS 800 have a built in tuner? (hint)

Now do DR103!!!

Gibson Les Paul Custom

Where is Dual Wreck / Mesa comparision?

@cnoberachus

4 ай бұрын

Thank you for asking, really apprechiate it. Sadly we were asked not to show that one.

@bm6244

4 ай бұрын

@@cnoberachus Why not, if I can ask?

@cnoberachus

4 ай бұрын

It comes down to someone doesn't want us to show their products in our videos.

@CCovers1

2 ай бұрын

@@bm6244 Mesa/boogie is owned by Gibson. HINT: Look which headstock is blurred in this video. Gibson are extremely particular about their products being demonstrated. I have the dual wreck and it's pretty damn accurate. It's a shame Gibson aren't a bit more open about their product usage.

Tune your guitarrrr

Ampworx sounds harsh. Good job, though!

I don't understand why blurring out the Gibson headstock while not blurring out the Marshall. That doesn't make any sense.

@srh361

7 ай бұрын

He's endorsed by another guitar brand and it's probably in his contract to not play any other brand so they blank it out.

@larsfrederiksen3005

7 ай бұрын

Ask the company that doesn't allow it. Please just focus on the rest of the video ;)

@srh361

7 ай бұрын

@@larsfrederiksen3005 Who said we didn't focus on the rest of the video?

@jeffallen3382

7 ай бұрын

@@larsfrederiksen3005 #gfy

@larsfrederiksen3005

7 ай бұрын

@@srh361, sorry. I just meant, please don't spend too much time focusing on that silly headstock thing. That company does what it wants to do and we can't really change that..

Blurring out the Gibson is stupid, we all know what it is…

@jcwoodstl

7 ай бұрын

It was a silly dig at a video that Gibson put out a couple years ago