Mini Boost DC-DC Step Up: Your Pocket-Sized Powerhouse. Low Drain only 0,2mAh during stand-by
00:00 Compare the sizes of step-up modules
00:28 The HW-357 device consumes around 8 mAh in stand-by mode
00:39 The Mini 360 device consumes around 12 mAh in stand-by mode
00:49 The Mini Boost DC DC device consumes around 4 mAh in stand-by mode
01:00 Module Step Up Marking input and output
01:07 Set output jumper The mini Boost DC DC
01:13 Jumper A and B location (mark circle)
01:51 Test output step-up module
01:57 Remove LED Jumper, The mini boost Step Up only need 0.2mAh
02:14 Design battery 9V, and the Mini Boost DC DC
02:13 charging battery Nokia BL-5C
03:00 PPhone batteries with overcharge protection are safe to use
03:06 But, size of the battery still bigger than 9V
The Mini Boost DC-DC Step Up converter is a versatile and compact tool for any electronics enthusiast. This tiny module packs a punch, able to boost your input voltage to various fixed outputs like 5V, 8V, 9V, and 12V, making it perfect for powering a wide range of projects.
What it Does:
Imagine you have a 3.7V battery from an old phone, but you need 9V to power your project. That's where the Mini Boost comes in. By utilizing a switching process, it efficiently increases the voltage to your desired level, providing stable power for your devices.
Key Features:
Compact size: Fits easily into your project box or breadboard.
Input 2.5V +0,5V (higher than input)
Multiple output options: Choose from 5V, 8V, 9V, or 12V to match your project's needs.
High efficiency: Minimizes wasted power duting idle.
Easy to use: Simple connections and straightforward operation.
Affordable: Budget-friendly solution for DIY
*Before using the voltage step-up module board:*
1. *Check the input and output voltage.* (Emphasis on checking before use)
2. *Set the output voltage as needed.* (Direct and concise)
3. Read spefication, input and output voltage