The HFP package on these cars bring it to a whole 'nother level. I can't help but stare when I see these on the streets.

@jordanadams7168

4 жыл бұрын

I wish I could buy one for my car😭

@xTheNameisEthan

4 жыл бұрын

Mine has the hfp bumpers and skirts but it doesn’t have the wheels : (

@dome4656

4 жыл бұрын

I was blessed on being able to own the HFP si, mines the 2013 tho

@Pharaoh_The_Great

4 жыл бұрын

It’s a shame that’s all they have is the hfp kit... not much other exterior mods. Unless you do some extensive research and find some other mods. But still a good looking car overall. (No contradiction)

@skyhigh5747

4 жыл бұрын

@@xTheNameisEthan wanna sell me the kit so you can get the wheels?

this video was definitely needed glad we got to see this

I own a 2015 civic si and I’ve been watching all your videos I’m just happy you made this video specifically 👍🏽

Nice tune!! Body kit looks badass on this Civic!!

Very nice man ive got a 12 civic si with rbc swap but its a stock port manifold and running stock 9th gen throttle body. I went with the ktuned adapter coolant bypass for my swap. The car is a night and day difference especially in the top with the rbc. Really woke it up

Literally my set up as well other then the Catless downpipe. But I am excited to come to you for my tune ! See you soon!

Impressive That’s good-useable-reliable power

Sound beautiful !!!!

Car sounds really good.

@iggyvlogs1132

4 жыл бұрын

Love you vids keep up the great work! Also would like for you to tune my car and put it on your channel!!

That's a pretty damn nice number.

Beautiful, I need this lip kit soon

Nice Work!

Sounds good,clean car

My 2012 si. K&N typhoon Intake Full race 3" Catted DP Invidia Q300 exhaust Flashpro - VitTuned Hasport 62A Rear Motor Mount 93 oct tune 206whp 173tq So looks like the RBC losses a bit of TQ but gains a more respectable top end. Doubt youll notice a -5tq but def trying to push 220whp. I think ill save up some and swap out my KNN for PRL and go RBC swap. The Vtec crossover sounds amazing.

@littleredsport5806

4 жыл бұрын

Im running rbc on mine and at 2.7k rpm i get a dip in torque but by 3k it picks right back up. torque actually carried better at redline too. By redline i was making around 10wtq more compared to the stock manifold and this was on the same dyno, sane tuner and similar conditions when i tuned on the stock manifold and hp carries to redline where before id peak at 7000 and then fell off from there to 7500 but now at 7500 its still making power.

Nice video, straight and to the point. The tq gains weren't dramatic but i bet it felt so much better being very linear. Do you do etunes?

@Darylrb1983

2 жыл бұрын

He does

Those are some hella good numbers I’m telling ya these 9th Gen Civics tuned are something else I myself can say it is well worth the money too get FBO and a Tune My 9th Gen Fb6 made 221whp 181 TQ Non-Ported Rbc Prl TB Adapter Skunk2 Downpipe Skunk2 Cold Air Intake Skunk2 Megapower RR Exhaust Type S Injectors 310cc Stock Throttle Body Hondata Flashpro 93 OCT

@ekbenny3939

4 жыл бұрын

220 w stock tb and injectors?! No way!!!

Super great setup now thats what I really call full and I mean full bolt ons lol but wheels were a little cricket so probably lossed a little bit a power there

i love my 10th gen and i loved my 6th gen civic. iono why they made such small engine bay on 9th gen....... its like my mr2, everyone hates to work on it.

That looks clean what kind of coil overs does it have ?

Suena lindísimo 🙈😍😍me enamore

Nice mods.

My k20a2 swapped em2 makes 252 whp / 255Nm Mods: Wiseco 12.5:1 pistons Manley h-beam rods Ported rbc (70mm) Tegiwa 70mm TB Toda 421 header 3" custom CAI 3" CUSTOM exhaust Grams 550cc injectors Dragcartel 2.2 cams Brian crower valvesprings and retainer Tuned on doctronics

@frankkirkman5994

Жыл бұрын

My stock j30a4 makes about that, so that's pretty sweet. 2 less cylinders and same power as a v6 honda. Most people who are number queens will hate on your 252 but that's from a 190hp engine, you made 25% increase on a n/a engine, that's cool...and probably super reliable.

@nicolasdujardin5691

Жыл бұрын

@@frankkirkman5994 everyone can have a laugh at it , i enjoy it to the fullest and it's indeed a very reliable car & engine ... i dont go for top dyno numbers, it's not a dragracing car, peak hp means nothing.. i go for the smoothest, most usable powerband possible... those N/A 300 whp peak cars are not daily drivable and have 0 power under vtec, mine has power all over the rev range. On the dyno it made 274 hp / 268Nm Figure a 8-9 % drivetrain loss should be around 252 Whp... Love the J series engine also! Is yours stock or tuned ? Enjoy it bud

@frankkirkman5994

Жыл бұрын

@@nicolasdujardin5691 mine is stock it's an 05, 6 speed exl accord. It's kind of just a winter car and I want to keep it stock, not like there is much you can do to a j series unless you build the parts yourself. I do have a 2003 350z with more or less full bolt ons and a 2012 audi s5 that's also very stock. Maybe one day if the Honda blows up I'll do somthing cool but for now it's just a winter daily.

Did you use a different coupler for the throttle body to the acuity intake? Or the one that came with the Ktuned Throttle Body?

I remember driving a tuned 9th gen, and I don’t know if it was on E85 or not, but it absolutely flew, didn’t even have an rbc I was blown away.

@royvazquez5892

4 жыл бұрын

My 9th gen is slow af

@Only1Kato

Жыл бұрын

@@royvazquez5892 😭😭😭😭

Can I add the same front and back bumper to my 2013 civic SI coupe? That is a 2015 but if both years are 9th gen are any of the parts swappable? I would really like the blind spot monitors, and the front and back end.

Have you done a video with upgraded underdrive pulley, NST or Buddy club? I have a 12 9th gen, full bolt on with tune, added the NST pulley kit, curious of actual gains.

What would you recommend to make 270whp? I'm already FBO making 205 with Acuity CAI, PLM catless headers with a Fullrace 3 inch

Mine is white. Looks good red. What’s the suspension setup???

Nice very clean would like to see a 8th gen si flashpro video!

@tuningbynick

4 жыл бұрын

8th gen Si content coming soon!

@zoob4371

Жыл бұрын

@@tuningbynickwould you recommend the 8th or 9th gen for a fun daily driver

I love my civic si 8th K24A2 230HP and 201torque

@belmundorodrigues-pires9202

4 жыл бұрын

mods?

@superipodmanvik

3 жыл бұрын

Mods?

@carlosr903

3 жыл бұрын

Modifications?

@Bentivegna91

Жыл бұрын

You swapped it ? Cause the 8th gen has a k20z3 if im not mistaken, the tsx was the only car to get the k24A2

Thinking on getting this car not sure yet is it a good choice?

beautiful civic and Good gains. My 9th gen made 203.73 HP, 176.93tq. Mods PRL short ram, invidia N1, HONDATA flashpro. Very happy.

@dre160

3 жыл бұрын

No down pipe?

@gustavopolanco6925

3 жыл бұрын

@@dre160 yes, no downpipe.

@joeyysee6632

3 жыл бұрын

203 whp or 203 at crank ?

@dre160

3 жыл бұрын

I think I was on a low reading dyno. I got the invidia n1 3 inch, full race catted dp, acuity air intake and it said I made 195 to the wheels. That can't be right can it?

@joeyysee6632

3 жыл бұрын

My 13 Si only has a 3 inch cat back exhaust and feels like I’m making 190 to the wheels with no tune never dynoed I just recently got a cold air intake for it but haven’t installed it yet I’m looking for 220 whp once I get flash pro and get some header for it but I can’t seem to find any header for it yet would a k24a2 header fit ?

🔥

oh my, the keyboard :o))))

Flatten that curve!

car is super cleeean 🥵

@tuningbynick

4 жыл бұрын

it really is

WhAt you charge for a tune ?

HFP come only black or white color ?

Any idling issues with the KTuned DBW throttle body? I know many folks have had issues with ZDX TB in the past.

@tuningbynick

4 жыл бұрын

None - It worked great. Its a super nice piece, i would definitely choose it over a ZDX

i need the rear hfp rear lip kit to finish my hfp clone look. i wanna do full bolt ons but wanna trade it in for a 2020 mustang or cybertruck cyberbeast. if not this will be the last car i finance as its already a perfect car stock.

How much do you think a fb6 would 14 SI sedan with skunk2 CAI, catless downpipe, invidia n1 exhaust, and e85

@tuningbynick

4 жыл бұрын

There are too many variables to guess hp - But if you wanted to run e85 you would need to upgrade the injectors. the stock injectors are basically maxed out on pump

Looks like it still wanted to make power is the oil pump or the internals not so good on these Z motors ?

@beatzzc1t

4 жыл бұрын

Oil pump is a limiter here, yes.

Did you need a adapter plate for the throttle body ? Will it fit the stock intake manifold???

@tuningbynick

3 жыл бұрын

The K-tuned throttle body bolts right up to the RBC manifold

witch tunner you prefer hondata or ktunner ? and how much do you charge for tuning

@tuningbynick

4 жыл бұрын

I prefer Hondata - Best to email me to discus tuning costs - nick@tuningbynick.com - Thanks

Curious, what state and can you pass emissions tests with a catess downpipe?

@jacobchaney

2 жыл бұрын

Toronto, Ontario, Canada. We don't have e-tests here anymore.

Bro where can you get this rims?? What are they call lol I've seen so 9 gen with them and some without are those oems

@tuningbynick

3 жыл бұрын

I believe these are just the OEM HFP wheels that come with the car when you get the HFP package

Hmmm, very cool video. I am interested in doing this, as I just picked up a 9th gen civic si a couple of days ago. I wonder what I would make with just an intake, downpipe and tune? Or is it worth investing in a set up like this?

@smokezyy8736

4 жыл бұрын

MrJayjay0420 getting an intake and downpipe as first is not bad since you'll need it anyway if you wanna run this kind of setup. What is not fine is getting an rbc and going s/c is an example of not fine because you'll end up selling the rbc anyway.

@MrJayjay0420

4 жыл бұрын

@@smokezyy8736 I hear running an rbc sacrifices low end and mid range, which isn't cool as it's my daily driver. I'd just like to extract a few more ponies without sacrificing low end and mid range. I'd be thrilled with 200-210 whp.

@smokezyy8736

4 жыл бұрын

MrJayjay0420 Acuity Intake, Catless downpipe, Flashpro and a good tune, you'll be around that HP.

@asakawolf6382

4 жыл бұрын

@@MrJayjay0420 downpipe, flashpro and mabey a cold air will get you there. I made 208whp when I was na with stock intake and mid pipe.

@joeymcquilkin3670

2 жыл бұрын

@@MrJayjay0420 Im in the same boat…. MAYBE down the road if I get bored with the power I’ll do an intake manifold and injectors but for now im doing the same - intake, exhaust, Hondata im looking for 200wheel - can’t decide on the down pipe situation yet, I don’t want the loud but I do want the power But yea, i/dp/e/tune you’ll definitely be @ 200

Hey bro I need my 2014 civic si to 2 step pop

I was wondering, if the rbc intake manifold fit on this engine, can you fit an aftermarket intake manifold on this engine? Are all K-series intake flanges all the same ?

@tuningbynick

3 жыл бұрын

You need an adapter plate such as the PRL adapter plate to bolt on the RBC to this engine

@carlosanduray504

3 жыл бұрын

@@tuningbynick where is your location nick

Where do I contact you to tune mine etune

Are you still doing tuning? How do you book appointment?

@tuningbynick

4 жыл бұрын

shoot me an email and we can set something up - nick@tuningbynick.com

What model are the rims the exact specs would be super helpful.

@jacobchaney

2 жыл бұрын

Those are the OEM HFP wheels.

I thought these 9th gens were already rated at 205hp from the factory?

Hi could you please drop here the dead times for the RDX injectors and Hondata FlashPro. Thanks in advance!

@tuningbynick

4 жыл бұрын

I dont have a perfect answer for you but the easiest thing to do is you can use the ones listed in Kmanager, you just need to convert ms to us - You do this by multiplying by 1000 - Example @ 14v 0.87ms * 1000 = 870us

@kennethfontenette118

4 жыл бұрын

@@tuningbynick I want to tune my 2017 accord sport. Any suggestions

Why am I only hitting 213? I got basically the same setup besides the 3” catback and a j37 Tb instead. I got a 2.75” catback. Does a 1/4 of an inch really make a difference in hp?

@Darylrb1983

2 жыл бұрын

Could be different dyno, weather, altitude etc

@albertvidal956

Жыл бұрын

That’s crazy I made 209 on just on catted downpipe and skunk 2 intake and Hondata dyno by a good tuner

I’m just curious if I take the battery out of my car do I need to disconnect the Flashpro? And when i put everything back do I need to program the Flashpro again?

@tuningbynick

4 жыл бұрын

It would be a good idea to disconnect the Flashpro before you disconnect the battery. The tune on the ecu won’t be effected by disconnecting the battery.

@baltazarbermudez4232

4 жыл бұрын

Tuning by Nick thanks

@baltazarbermudez4232

4 жыл бұрын

After I do the reflash on my car do I need to leave the flash pro plugged in or can I unplug it and drive without it? I’m just wondering

Where are you located?

In Canada we dont know how to tune k series but américains do

@cheeseman981

3 жыл бұрын

what you mean this guys shop is in toronto

do you install parts?

Do u offer e tuning?

@tuningbynick

4 жыл бұрын

yes i do - best to shoot me an email to discuss - nick@tuningbynick.com

Did the k-tuned throttle body throw any codes?

@tuningbynick

4 жыл бұрын

Nope - it worked well on this car

@DC5K1D

4 жыл бұрын

Tuning by Nick I have all the parts ready to do the rbc swap but looking at this I’m considering going with the 72mm TB

How can i get ahold of you for a email tune?

i have the same car and really want a full bolt on and tune. Can it still pass smog?

@tuningbynick

3 жыл бұрын

If you run a CAT on the car it should still pass smog

@malc1012

3 жыл бұрын

@@tuningbynick awesome! thank you for your help!

My 9th gen si was tuned on a dynojet and makes 215whp/185 wtrq, I want to go RBC, but afraid of loosing out on the torque that the car has.

@dc4dudefg4

4 жыл бұрын

Ikigai my car makes 227whp/187tq on 91 with fbo ported rbc

@MugenStylez

4 жыл бұрын

DC4Dude FG4 Do you have a larger Throttle body?

@dc4dudefg4

4 жыл бұрын

Ikigai yes I do cause I said f it I already got the rbc to 70mm might as well get a matching throttle body

@dre160

2 жыл бұрын

You will miss it. Trust me but if you can stay in the top end when it counts it doesn't really matter.

🤔🤔 shouldn't they make a bit more? I am I/H/E FP 8thgen 218whp 160tq , stock injectors stock manifold stock throttle body

@tuningbynick

4 жыл бұрын

8th gen and 9th gen Ks are very different engines - The 9th gen K24Z7 has the single exhaust port and no VTEC on the exhaust cam - These are really good numbers for one of these engines on my dyno

@8k_all_day664

4 жыл бұрын

@@tuningbynick I bet , I just figured the TB, RBC+ported, and injectors would put this near 230whp 175TQ+ 🤔

@b_nast19

3 жыл бұрын

@@8k_all_day664 maybe to the crank

what does full bolt on mean?

@albertvidal956

Жыл бұрын

Exhaust downpipe intake rbc manifold swap

does anyone know is 1997 preludes can use hondata or kpro

@NEO_Trojanmuldrop4

4 жыл бұрын

Ahhyeha Kpro and ecu has to be sent out but don’t quote me

@brandonbrisson844

4 жыл бұрын

Ahhyeha Hondata with a OBD1 p28 Ecu for example.

I heard Nvidia graphics card ... ?

Tunning by Nick where are you located at ????

@tuningbynick

3 жыл бұрын

Im in Toronto, Ontario, Canada - If youre interested in either a Dyno tune or a remote/etune - Shoot me an email and id be happy to discuss - nick@tuningbynick.com

@OrangeDCTypeRAcuraRSX

3 жыл бұрын

@@tuningbynick im in Florida USA

What's yall elevation?

@tuningbynick

4 жыл бұрын

we are basically sea level - I think its something like 250ft iirc

@yosh_tuned

4 жыл бұрын

@@tuningbynick Nice. Been watching your vids. Good stuff and really good power out that 9th gen

What fuel?

@tuningbynick

4 жыл бұрын

9thgensi 13 this was on pump 94

@live_life2tha_fullest9663

3 жыл бұрын

9th gens take 91 premium gas.

Stock power is 205HP correct? So multiple thousands for 16HP? I'm sure it sounds nicer and is more fun to drive but daaamn that's not cheap.

@tuningbynick

3 жыл бұрын

The 205 hp rating is at the crank. These dyno results are at the wheels. These cars only put down about 180 wheels HP when stock.

@Ellron23

3 жыл бұрын

@@tuningbynick ah I see so more like 40HP increase. Pretty good, these cars can definitely use some help on the top end. Is doing full bolt ons + tune more cost effective for performance gain than a turbo?

@tuningbynick

3 жыл бұрын

Personally i think going turbo is the most cost effective performance gain - A good turbo kit on these cars gets you to 400 Wheel HP

@ameykarade9432

3 жыл бұрын

@@tuningbynick Do you have any idea how much would that cost approximately (complete turbo setup)?

@k24z7_

3 жыл бұрын

@@ameykarade9432 around 10k CAD

Hey where's your shop ?

@tuningbynick

4 жыл бұрын

Im in Toronto

@OhSnap1983

4 жыл бұрын

@@tuningbynick do u have an email I can contact you at ... have a few questions about tuning and prices

What is RBC?

@nicolasdujardin5691

3 жыл бұрын

The original jdm dc5 intake manifold

@jacobchaney

2 жыл бұрын

RBC is the intake manifold from the 8th gen SI.

I don’t think RBC is worth it if your NA stock motor

1K likes!

9th gens are slow as fuck but goddamn does that sound good shoulda got a 6spd ilx with the z7 instead of my 10th gen hatch

Fbo barely makes your car faster you gotta build the head or turbo

Need supercharger

221 to the wheel? Say less

🧐

Not bad, check out mine

Down pipe??? Lol

@blooddrunk3330

4 жыл бұрын

Yeh these Si got downpipe

God that's so depressing. That's like what 3-4k in parts? Sigh.

All that money for 221 horse and 168 torque and to get a tenth gen there all you need is like 500 bucks lmao you’ll get 280 torque and 230 whp.

@smokezyy8736

4 жыл бұрын

SWEATPANTBOIZ but those are turbo'd from factory comparing to an N/A

@royvazquez5892

4 жыл бұрын

But if u slap a turbo on the 9th gen the 10th gen dont got shit on it

@linkinparkdrift

4 жыл бұрын

@@royvazquez5892 Likewise. Slap an aftermarket turbo on a 10th gen and the 10th gen is in front again lol. And you've still spent half the money.

@feelthatfeelthat

4 жыл бұрын

@@linkinparkdrift LOL. The 10th gen is a 1.5Litre. K24 with turbo make well over 400whp with ease.

@linkinparkdrift

4 жыл бұрын

@@feelthatfeelthat Damn Honda guys really are crazy. Making fun of a 1.5L like they don't say "size doesn't matter" when V8 guys pick on them 🤣

Perfect Civic. 10th gen = 👎

Very nice I just got my acuity cold air too, it should make good power I made 232hp 183tq on my setup, so let's see what he makes, car looks damn clean and good love it below is my dyno video kzread.info/dash/bejne/eIl8rqSEhqnIXbg.html

Looks dope but sounds like a fart can