No video
99 Ford Ranger Parking Brake / Emergency Brake Cable Replacement
hallcraftsuppl...
The Emergency or Parking Brake cable snapped.. this is how to get the cable off the brake pedal, and how to replace it.
There's 3 bolts mounting the brake to the side wall of the truck. take em out and it comes off. Then pull the cable through the fire wall and follow it under the truck down the driver side to just below the door where it connects to the rest of the cables. the cable is three separate pieces linked together so figure out where it broke before you get to this point or buy the new cable!
keep in mind, I didn't need a video to fix my truck.. I made this video of myself figuring out what to me was the hardest part, so that if I screwed anything up or forgot anything I could see what I did.
Пікірлер: 11
I cannot stress how helpful this was. Bought a beater 98 ranger manual literally today. Guide after guide showed everything except how to get this f****** out.
@hallcraft
2 жыл бұрын
Glad it helped!! I searched for info like 2 weeks, finally I just pulled it out and stared at it for like an hour.. felt like I had to put this on the KZread. haha
I'm in the middle of this right now - this helped a lot.
There is a hole that lines up with the pedal and side of assembly and a third hole that will align when you pull the cable put a pin through there to slack the cable and set the tension
Hay exelent
Ok. We just got a junker 2000 ranger xlt. We need to fix the ebrake there appears to be soooo many variants of the part. Any recommendation for a part number or length It’s a 2000 xlt 4.0
@hallcraft
2 жыл бұрын
well, ACDelco Professional 18P2634 Front Parking Brake Cable , is the part I got off amazon. What do you mean fix it? its just loose or the cable snapped or the brake drum insides need replacement, if you have drums, could need repair in so many was. I did the job over a year ago so off the top of my head all I can recommend is that you find where its broken first, if you mean there are multiple pieces of the cable, find where it snapped, then brows amazon, put in the truck make n model and it will give matching parts. you can always go to the junk yard and pull a truck apart before doing yours to figure it out too..
Need to remove this video lol
@hallcraft
2 жыл бұрын
why?
@hallcraft
Жыл бұрын
@Frank Furter obviously, you didn't see the clowns face.