Tremec T-56 Manual Transmissions ,Windsor 427 stroker build,Williams modular pumpkin,Sniper Dual 4-Barrel , a whole lot of plate welded in the front end,Total Control coilovers three years of sweat blood and tears ,ten years of salary some not yet paid off and an exe that calls my flatblack stang the Devil. Neigbors that call the police everytime I start it up ... priceless

@shawnvance5874

Ай бұрын

That's not very incognito

my wife has a ‘04 40th anniversary, thinking of swapping the V6 out and this definitely helps

I have an '03 Mustang V6 drop top that bought brand new 19 years ago. It's always been just a third or fourth string fair weather use-only car and otherwise has always been garaged, and now has only 45k miles. It's like new, top, bottom, inside and out. The trunk and leather interior still even smell new. I was at first considering selling it and buying another new (to me) toy car like a later model GT, but instead I'm considering doing a Coyote swap. I've had the car for so long and taken such good care of it that I'm a bit sentimental about it, and the money I would get by selling it isn't enough to make it worth it. It would be a much better deal for the buyer than for me. A Coyote swap, maybe using a Gen III crate motor and trans combo, is starting to sound like a much better, best-of-both-world way to move up to a Coyote Mustang but keep my existing car. With it being in like-new condition I think it would make a perfect starting point for a swap (no damage or rusty hardware, etc). I've been watching many Edge swap videos and reading project write-ups to educate myself and make a decision. Your video was very helpful. Thanks.

@thatmaverickguy859

2 жыл бұрын

Don't swap it to clean

@thatmaverickguy859

2 жыл бұрын

@diane Taylor because the cars to clean idc if it's a V6

@thatmaverickguy859

2 жыл бұрын

@diane Taylor I say for the money to do it then sell it it's not worth it

@aoclive6710

Жыл бұрын

Don’t sell it . Sometimes you just have to enjoy the car how it came from the factory

@solowstang9821

2 ай бұрын

Man you still have your v6 motor 😭

Subscribed!! I might get me another v6 just to do this swap, I'm currently building a widebody twin turbo 4.3l stroker.

You got good content bro keep it up there is a lot I have learned about these 32 valves from you

@DriftDreams242

3 ай бұрын

Thanks man, i appreciate the support and im definitely not hoing amywhere 🌴😁🌴

How did you drop the 5.0 in without changing the k-member? I was always told they were too tall and you needed a different k member or a cowl hood to clear

Dad had a 98v6 5spd and I have an 01 town car with a couple engine problems. Just recently the wheel broke off the axel and it's gonna be sitting for awhile. Thinking about just taking the engine out of the town car and giving it to the mustang.

Great video. If i were to swap in a carbureted distributor ignition 302W, would i still have to worry about the wiring? I have heard that the transmission wouldn't work without ECU information from the motor, but that may be another rumor like the K member, I often hear these 2 things mentioned in the same breath.

Really thinking about swapping in a 4v into my 08 that currently has a 3v in it. I’m pretty happy with the 3v but I eventually want more power than these internals can handle. Just trying to decide which way ima go but I want to find another engine either a complete 4v or a 3v shortblock so I can build the bottom end to handle 10-12lbs of boost. Currently I’m pretty happy with the car but im already pushing the stock internals to their limit I’m sure. Pretty much full bolt on jlt cold air intake, underdrive pulleys, 3” exhaust no cats or mufflers, 1.75 long tube headers, Ford racing manifold, gt500 tb, hot rod cams, 4.10 gears, zex single nozzle wet kit 125hp, with a n/a and n2o Lito tune. So with all those parts already bought and on the car I kinda want to stay with the 3v but just build a good shortblock and put either a centrifugal supercharger or a single turbo on it. Every one around here seems to hate the 3v and says to go with the 4v but I’m already in pretty deep with the 3v and kinda like the idea of being the outkast no one ever builds bad ass 3v’s

@justa3v619

3 жыл бұрын

@@DriftDreams242 they are most definitely the bastard child and I really don’t get it. I mean from the factory they make just as much n/a hp as any of the previous 4v motors. And mod for mod they will hang with a 4v. I guess it’s just the whole cam phaser problems.

@jgrilla6084

2 жыл бұрын

Can u put a coyote 5.0 in a v6 mustang ?

@justa3v619

2 жыл бұрын

@@jgrilla6084 yea only downside to using a v6 car is the rear end is a 7.5” not the 8.8 few other minor differences but it’ll go in the same way as it would a gt body.

@jgrilla6084

2 жыл бұрын

@@justa3v619 thanks brotha wanna buy this v6 but engine swap to make a drift car

I’ve heard that the 3v can be directly swapped and can even use the 2v harnesses for the 4.6 would the 3.8 harness work with it also?

Hello friend I want to do the same with the next generation 2005-2009, but I don't know how, I hope you can guide me. greetings from Tepeaca Puebla / Mexico

@kalebistheman16

2 жыл бұрын

I was recently told by a Ford enthusiast that it’s not really made for GT swaps but I’m sure it’s possible

Thanks for the information bro im bout to swap my 04 v6 for a 4.6 from a another mustang but idk where to get a donor car

@angelarmendariz8844

2 жыл бұрын

Do a 5.4 swap be better

The best , most in deep video thank u my guy

I got a 4.6 2v out a 1999 mercury and the guy pulled the motor and trans for me and the wiring harness and computer for $250 and I just swapped the motor mounts and im getting ready to pull the v6 and put the v8 in any tips on pulling out the v6 and also I got long tubes for the motor can I put em on the motor while dropping it in?

So helpful! I searched online and couldn’t find a straight answer as to what fits. Good news for me is I don’t have to get a new trans to 5.0 swap. Thx 🙏🏿

@69chosenone

Жыл бұрын

I have a 2000 v6 manual but it's not a GT would I still be able to make the swap?

just got a 02 base for 500 . im gonna do a 460 swap with it

I guess we'll just go for the gt look and enjoy the car for what it is.

I'm wanting to put a 460 in my new edge what would you recamend for wiring

So I’m gonna swap my v6 to an 4.6 gt motor do I need to change the transmission or can i use the same one

Thinking about swapping my 2010 v6 to a 4.6 looking for a donor car now.. I'm thinking a crown Vic

what would be the estimated cost from v6 to 4.6 2v

Is it only realistically possible with older cars? I have 2012 v6 but they say everything under the car needs replaced. How do 350zs get LS swaps then?

So you could use the v6 k member for the dohc 4.6 swap just use the 4.6 motor mounts

So i have a 99 mustang v6 automatic will my trans work with the 4.6 2v motor i heard the gt and v6 automatic transmissions were the same

What about the cooling and the rear end ...or the springs that are made for v8 engine weight

I want to swap a 5.0 coyote motor into my 2001 Ford Mustang v6 but I can’t find anything on it only seeing people do it with a gt

I have a 2000 v6 manual but it's not a GT would I still be able to make the swap?

I have a ford f150 2003 and i want to swap to a v8 does this still apply?

what about the speedometer, temp gauge etc. do they work with the donor's computer (5.0)?

So if I’m swapping a 2004 Ford Mustang v6 to a v8 I need motor mounts,the computer and…

What year Lincoln engine did you put in it

98 v6 car, going 5.0, will my k member and auto trans work?

I just bought a ‘95 mustang but I want to swap it with a ‘95 GT v8 am I able to do this?

Recommend changing the rear end too those v6 rear ends don’t last long behind a v8

@josephfarfan-fq8ji

3 ай бұрын

wich rear end will be good? im about to swap mine

@toddgoulart6961

3 ай бұрын

The 8.8 out of the gt

Huge respect for the swap but couldnt you have used a better recipient for the V8?:) That old girl is in `hurtin shape, makes for a nice sleeper though.

@DriftDreams242

4 ай бұрын

Thanks man, I definitely could have lol. In my recent videos I have a much nicer Mustang with a 4v swap in it as well, thanks for the support man 🌴😁🌴

I want swap chevy v8 engine to my 1975 ford taunus can i do ?

Bro am getting a 02 v6 I need your help in swapping to v8, how can I reach ya?

I have 2000 f150 v6 4.2 can I put a v8 4.6 ?

I’m currently taking a 2001 4.6 with built 5 speed behind it into a 1994 mustang that has a v6 in it any idea on what I’m going to need? Any help would be great

@jvking4898

Жыл бұрын

Did you ever swap it?

hello i have a 2000 mustang 3.8 can you boultup a 4.8 to tHAt trany.....

what’s the total cost of all this?

Will a 98 v6 mustang work in a 02 v6

How much hp yu have so far ?

Can you swap it with an LS motor

The only time you need to change k members is if you're LS swap

Jamaican accent? Anyway thanks for your help im doing all this but in England.

Last yr for 5.0 was 95 atll the new 5.0

I just got a 2004 4.6 5 speed that runs drives and I have a 2002 3.8 automatic and I wanna do the swap into the 2002 Bc the car it self means a lot to me I’m wondering if that how easy would the swap be or would it be to much money into it than I already have also I’m just wondering about the harnesses would it be hard to hook up I can’t find any videos on it like installing

@alejoaldaba6356

2 жыл бұрын

@@DriftDreams242 ok so it would be very hard right because some one told me I could just take my v6 body and just sit it on to the v8 chassis

@alejoaldaba6356

2 жыл бұрын

@@DriftDreams242 ok in your opinion what should I do. I’ve watch a few of your videos before i wish I had your knowledge

@alejoaldaba6356

2 жыл бұрын

@@DriftDreams242 ok thank you so much I wish you luck on your builds

I hear the new edge is good for a coyote swap. True?

@michaelmcgrath6147

2 жыл бұрын

They don't require a different k member or transmission you are just buying the motor and wiring for the coyote

I got a 99 v6 ,wondering if I should take the motor out my 99 crown Vic or get one out a different car if so which one?

@donjaunkirk7896

Жыл бұрын

@@DriftDreams242 okay I was just trying to see what’s better & cheaper to have built by this summer

tell us more about that steering column ....

@GUE5TPA55

2 жыл бұрын

@@DriftDreams242 it is not a stock mustang column ? Did you switch it to get around the PATS security or for some other reason?

32V motor? 👌🏻❤️

Are you sure that the 95 mounts for 5.0 will work in a new edge I just want to make surr before I spend the money. Are they designed the same?

@jordanv3842

2 жыл бұрын

I’ve seen it but I thought the k manner was different between the actual sn95 and the new edge. I have a 99 so if I use 95 mounts they will work in a 99 I’ve seen your video but like I said you dropped the 5.0 in the sn95 I have a new edge so Im just wondering if the k members are the same ? A lot of different answers when it comes to this.

@jordanv3842

2 жыл бұрын

@@DriftDreams242 I ordered them if they bolt up you have earned a new subscriber.

@jordanv3842

2 жыл бұрын

Okay so I have a 99 new edge I bought with the 5.0 already swapped, motor mounts are just ruined .So your saying that the 79 thru 95 mounts I ordered will work on the 99 v6 model. If u have face book I can add you on there or I can give u my email and we can keep in touch on there. Just let me know.

@jordanv3842

2 жыл бұрын

@@DriftDreams242 okay man I appreciate you. 💯

I’m trying to engine swap my V6 95 mustang to a 5.0 just pretty hard to find a engine And transmission

@tristenjauregui2948

Жыл бұрын

@@DriftDreams242 would I have to replace the driveshaft or anything else?

I’d like to trade my 08 Ram 1500 4x4 5.7 for a 02 Mustang n put a Hemi in there. That’s my plan rn at 18 lol

Do you need to change out the rear end?? Also do you have to ditch the AC/heat even if using a 4.6 2v from another mustang gt? Or is that going to be plug and play for the most part?

I enjoyed the topic and the video except your use of the word "Outsource," it's not used in the appropriate way. To Outsource something is to give work to another party. I think that it's best to use another work to mean what you meant to say, which I think it was that one would need to find an alternate source. Am I right? Great video.

Hey bro quick question, Can you use a 96-98 3.8 transmission with the 4.6 engine when swapping?

@DeiHarper9361

2 жыл бұрын

@@DriftDreams242 Oh..even if it's 5spd?

@paigedoyle6629

2 жыл бұрын

I have a five speed trans in my 03 v6 and I wanna put a 4.6L in it! Are you saying my five speed won't work for the 4.6?

@paigedoyle6629

2 жыл бұрын

But it will work on a 5.0 correct? If so, what year model 5.0 should I be looking for on my 2003 to work

@paigedoyle6629

2 жыл бұрын

So the only way those will work is slap a carborator right! No fuel injection?

@paigedoyle6629

2 жыл бұрын

Thanks bro

U in freeport bro?

What would I need to swap a 4.6 2v into my 99 v6?

@shadowstang1833

3 жыл бұрын

@@DriftDreams242 is that it foreal?

@TurboTurdBurglar

2 жыл бұрын

Its a bunch stuff to do it correctly and have everything work like factory. I just did this i had to change almost everything including the dash, brake pedal (hydroboost pedal is different than a brake booster pedal), master cylinder, radiator, radiator overflow, changed my k member just to be on the safe side, exhaust, blah blah blah you pretty much need a doner car like i did to make it easy

What was the standalone harness that you used?

@DriftDreams242

3 ай бұрын

Ron francis wiring harness but i found out the holley harness for the 2v 4.6 is way better and it comes with a standalone ecu

I have a 1999 Ford mustang I have a 1995 crown Vic as a donor car is this possible? And if so how to I do the gauge cluster?

@levigillis1048

Жыл бұрын

@@DriftDreams242 4.6

@levigillis1048

Жыл бұрын

@@DriftDreams242 the mustsng is V6

@levigillis1048

Жыл бұрын

@@DriftDreams242 okay so the crown Vic emc will it be needed? To make everything work I need to find all the wiring harnesses interior engine and trans included? And of course a V8 gauge cluster?

@levigillis1048

Жыл бұрын

Also how did you get away with the anti theft system?

@levigillis1048

Жыл бұрын

@@DriftDreams242 also since I'm taking the transmission with it should I look for that year model mustang? I know the speedometer is different then the 1999 mustangs

Any V8 you say?

So your car is automatic?

Where did you get your motor mounts from?

Man if I wanted to put Oprah talk show on Dang Oprah

I tryna do a 5.4 navigator swap in a 2000 v6 I need mad help

@emersonrussell5946

3 жыл бұрын

@@DriftDreams242 I need someone who cld hook my car up I ain touch nottn yet. I try calling some mechanic who I know but cldnt get in contact with anyone.

@emersonrussell5946

3 жыл бұрын

@@DriftDreams242 I just change phones not to long . I lost that number

Will the coyote engine clear underneath the v6 hood?

@DriftDreams242

2 ай бұрын

It will

@FrankRizzo333

2 ай бұрын

@@DriftDreams242 I also have one of those fake hood scoops that I can make into a functional one, would that be required if I was to add the supercharger at some point or can it still clear? (Thank you for responding btw)

@DriftDreams242

2 ай бұрын

@@FrankRizzo333 im really not aure about that one, superchargers usually require a hood scoop because of the height they give a motor,

Im. Doing a 4.6 swap In my 04 base mod. Do I need to. Use a gt 04 computer an harness. Or is there any other way to mod

@JoseRivera-zl3tv

2 жыл бұрын

@@DriftDreams242 my bad. O I ment a base model 04 mustang. 40th gen

@JoseRivera-zl3tv

2 жыл бұрын

@@DriftDreams242 if any possable if ya come a cross 04 gt hit me up I am in need of one IV lookled every were tht I can think of . or if u got a spot I could look up be awsome

@JoseRivera-zl3tv

2 жыл бұрын

Some one just told me 03 and 04 or the same is tht right

@JoseRivera-zl3tv

2 жыл бұрын

Sorry if I am to be a bother my bad learning. On this one

what about t56 xl magnum

@Gravex20111

2 жыл бұрын

@@DriftDreams242 Sir your just humble about your baller status

Is it still reliable

@alejoaldaba6356

2 жыл бұрын

@@DriftDreams242 I want to do one did you use the trans from the Lincoln too and did you use the wire harness from the Lincoln too

@alejoaldaba6356

2 жыл бұрын

@@DriftDreams242 I currently have a 02 3.8 I want to do one swap I want to but i don’t know what motor I wanna do 4v is hard to find here

@alejoaldaba6356

2 жыл бұрын

Would the 2v be just as good on stock internals as the 4v I don’t wanna rebuild internals

@alejoaldaba6356

2 жыл бұрын

@@DriftDreams242 would a donor car be a good idea

@alejoaldaba6356

2 жыл бұрын

@@DriftDreams242 theres a 01 gt near me for 1800 I think be ideal but the transmission line has a leak I think be I good idea idk what others thought

Ok this is cool an all but where the heck is a video for putting a v6 in v8 I absolutely hate v8 and 5.0 they always blow up I have a great v6 that has a shit body and a perfect gt v8 body now how and what do I need to do to make this happen if anyone knows Any videos or tips pleas lmk sick of just staring at this hunk of meatle in my garage

@Xelaon

2 жыл бұрын

Let me get that v8 👀

I don't understand why ANYONE would buy a V6 mustang

@DriftDreams242

Ай бұрын

Agreed lol

I swapped mine

Bro leave the engine alone lmfao fix the body

Talk to much