I am learning so much...Bit Modulation, Bit Angle Modulation, who would have guessed, seeing how colors and dimming works....Thanks Kevin, like your microphone, sounds great...

Love your videos as well as this project, this one did make it a lot better to understand with an example rather than theory! I would love to build one of these some day! Can't wait to see more!

Wow, I did not expect another video on this subject. Thank you a lot for the hours of demonstration and theory. I just ordered my parts on Futurlec. Can't wait to start!

This was really helpful, thanks.

Evidently, you're REALLY UNDERRATED!!! AMAZING MAN! AMAZING! KEEP IT UP!

thank you SO MUCH Kevin, for your insight into L.E.D.'s and microcontrollers and Multiplexing and making an L.E.D. cube. you have given me what i need to make my own cube. in fact, i have already made a 4x4x4 test cube i am now going to make an 8x8x8 cube. or TRY to at least. thank you once again for your time and reading this message.

very cool video! very well explained! bit angle modulation is fascinating!

2019 and this is the best explanation. Incredible!

It isn't difficult to stay awake when you are interested in it. :) Even watched them twice or even three times. First, because I was looking for some inspiration, second time because I knew I was going to need it and sometimes the third time to actually make any sense of it, considering I don't really have a background in electronics.

love you too! glad the vids are a help!

Damn im soooo happy ive found your Video!! I want to build my own first RGB Cube an couldnt find anything about how the „dimming“ works… HUGE thanks to you.

sweet! Thanks!

I learned a lot, thank you very much

Really great video explaining something really really cool!! Explanations were simple enough for anyone with any kind of interest in electronics. If you have an Arduino, then you probably know enough to understand this video and go out there and build one of these.

@SuperTechIT

9 жыл бұрын

Dei Shaw I can honestly say that probably 80% of the people with an Arduino probably couldn't complete this build by hand! LOL! The single colour 8X8X8 cube gave enough people a ton of problems!

This was Awesome!!

You are a GREAT teacher!

thanks! Yea I don't know.... I go both ways with micro controllers. My go-to is the ATMEGA328 running an arduino bootloader because I can crank out projects fast. If I'm in a pinch for space and energy, I might pull out my PIC 12F683 or if I need some serious horsepower I may even run with a Parallax Propellor. And if I need WiFi, I'll go with the Electric Imp, so yea it all depends on how I'm feeling. My geiger counter projecct used an arduino and a PIC!

Thanks that was awesome.

I've been having difficulty lighting LEDs in multiple columns. Since all my levels are connected via ground, i can't figure out how to get a trailing effect without the column being solid. An animation that experiences this issue would be the transition from an outer cube to an inner cube.

I made it! Thanks for these tutorial videos. Only thing I did different was stack the boards on top of eachother via hex spacers and placed them underneath the cube. I don't know if you look at these old videos, but have you tried to use the code with the ESP32? I think mine doesn't get to send the full 200 bits. I used the void IRAM ISR for the interrupts.

Kevin, I really like the way you demonstrated the cube as it pertained to multiplexing...I am an ITT-Tech grad..way back from 91' and I have been getting back into project building but it's been close to 15 years since I have worked (or played) in the electronics field, so I do remember fundamentals but am extremely rusty. My question is.. what value is the current limiting resistor you use on the all of the npn transistors connected to the anodes.? the cathodes didn't require one other than the 4k feedback.

thanks! the update speed is about 8kHz if I remember correctly, but that means each level is called at about 1kHz with an ON time of only 124us.

yea, I suppose you could get creative with where the bits reside and stagger it. I guess you could even have it actively select where it turns on and off so you get a smoother display

Start by watching his theory (I believe there is a bit on BAM there) and code video, looking through his code (on his website). It has helped me a lot in understanding. :)

can give me a list of materials is that I will do an identical job for the end of the course

this is awesome... btw you look like Leonardo Decaprio :O

@zyzzthetics7

6 жыл бұрын

mriloveethanol true lol

yep, those videos cover that... if you got the time to watch, and stay awake through them!

your welcome, thanks!

How many data lines are needed for 8x8x8 RGB?

nice video, good explanation

Thanks , now it is clear to me :-)) Thanks 4 sharing Greets M

Awesome!!!! Thank you so much! I was wondering through watching your videos was are you also using PWM with bit angle modulation for this cube?

Nice moustache, man

Your cable spaghetti is impressive !

yep, thanks

you are very very welcome. but this truly is a work of art. sorry about your day though. but i mean, nowhere to go but up eh? keep that head up and keep programming/doing whatever it is you do to make your videos so damned intriguing. but i do have a question, if i may, would you prefer using the arduino chip? (i think its atmega something sorry im a bit rusty and dont have a reference right now) or would you prefer using a PIC chip? (i think its either an 8-pin or a 10-pin one)

I have a little cube that uses a bunch of transistors, and it uses too many pins to use PWM. I think I should try out BAM, but im not sure where to get started.

thanks man! I needed this comment today... long day at my real job

can you buy thes led cubs on line

if you did a 5,5,0 would it mean that the green and red leds would come on at the same time even in slow motion?

yes this is a retina. I love it, but I do see the 'ghosting' screen defect people are reporting. I am planning on swapping it out before my first year is over, but other than that this thing is a beast... boot up time is like 8 seconds

How did you construct the 8x8x8?

re: Michael Braverman >>Does anyone know what update rate is necessary to make your eyes get tricked? It varies a little by person, but most people lose the flashing sensation at between 17 and 20 changes per second. At those rates most people can perceive flicker when using their side vision, but up it to 30 per second and I doubt anyone can.

you are the best

I love your vids and that led cube but i America trying to replicate it and I am confused about all those transistors and do I need them? Thanks😎

@SuperTechIT

9 жыл бұрын

Ryan Armstrong You can use my PC Boards. Way less parts, same basic code, plus access to much more code on other microcontrollers. www.TheLEDCube.com

wow, sounds like you're on to something there

I loop cycle is the same length in time then you would not get 16 levels with 4 bits, because 5 (1+4) and 6 (2+4) is the same ON time. So, the idea of BAM is that loop cycle time is different for bits (longer for higher bits).

if i use 8 bit angle modulation i'll use 8 arrays of red,green,red each right ? and in the BAM_Counter i will increment the BAM_Bit every 8-24-56-120-247-503-1015 and reset at 2040 please answer me i learnt alot from this videos and i think sharing these information is really cool from you :)

@mabdo88

10 жыл бұрын

Kevin Darrah

Kind of, but not really. The multiplexing is like PWM as each Level has a duty cycle of 1/8 but I am controlling brighness purely through BAM

check out the build vid

Hey, very nice Project... I think for me... Id have to wait a bit before I try this, but it seems very interesting!... for now Im doing something much simpler, and was wondering if you could Point me in the right direction.. I am Building a X=30 Y=20 Matrix. Totalling 600 LEDs. (LEDS=WS2811 RGB Strips.) I want to create a star ceiling. I will be attaching the ´stars´ to the LEDS as Plastic Fibre Optics... in other words, I will be bundling about 5 plastic optic Fibres together, and attaching them to each LED... meaning I will have 3000 stars. I want to Control the stars via remote Control, so that I can perhaps have about 12 Buttons.. each button could be a constellation. So when I press the desired constellation, the LEDs would Change according to the configuration. Can you recommend a way of programming this with Arduino? Thanks.

would need a moderator to check the messages, before up load to the cube though. :) You could have a juke box connected also, so people can select a song for the cube to sync too.

Actually, what you're doing isn't real bit angle modulation, but rather standard PWM - even though you're trying to distribute the on times. The idea of bit angle modulation is that the period for the higher bits is longer than for the lower bits, therefore reducing the number of cycles necessary. For your cube, using 4bit brightness, you'd have to have 4 different cycle lengths (8, 4, 2 and 1) and would therefore need a lot less cycles. Your cube is pretty awesome nonetheless... ;-)

I don't believe the 74HC595 Shift registers allow Pulse Width Modulation. So, I think he only uses Bit Angle Modulation to control the brightness. Also, if you go through his code, you see he only sends out 0s and 1s. :-)

Im sure that using the TLC5940's would've saved you alot of time.

Well this is much better explained than your code Video :) reat work, i think ill attempt to build a small version of this :) lets say 4*4*4 thats not that insain :)

What sorcery is this?

haha, yea this thing is a beast

How about a large LED cube in a shopping centre/mall that peope can txt by phone and donate to charity in the process ? say 20 percent for running costs?

wow, the only thing this video did was make me feel really fucking stupid lol. Give me a car, and a welder, and i can do amazing things. Computers are all black magic and voodoo lol.

@Xilurous

10 жыл бұрын

Aha give me a car and a welder and i'll find some way to break both

@officialanoopkumar

8 жыл бұрын

go on ride in your car to your home (DUMBVILLE)

just 15,15,15

no i dont mean that so i mean that when you have the full power, the leds are always on in one period of multiplexing. but what you do whenyou wanna light up all colors at full power ? you cant light every color in the row at the same time on ?

So, ultimately, multiplexing isn't a great solution for large cubes. The larger the cube, the dimmer the highest level brightness of the LEDs. Combine that with the fact that this is an RGB LED cube, with essentially THREE TIMES the LEDs as a single color 8x8x8 cube. Eventually, it will become better to have an IC with more output pins, or to use shift registers to add output pins.

....wow...if you perfect the algorithm..than you have invented a 5D TV... Imagine ..a big t Rex walking show at night...with sound

hey ! whyt you do, when you wanna light all colors (r,g,b) in on row at the maximum power ?

you could text your name to the cube , or a message for a loved one. : )

hehehe, I know. It's ugly, but I love it

Did u go to school for this?

Thanks, Leonardo DiCaprio Jr. !!

hey dude, would you be interested in selling that?? xD really wan't one but it's a little out of my capability, lol just reply to my comment, i don't check my inbox.

HUH??? This is so over my head, and why i'm not a software engineer. Or whatever this is for... is cool though.

looks great, but I can't follow. I'm an LED dunce

Why not just change clock rate rather than slow motion camera.. lol

and i thought my rats nest was bad

u lost me at 0

Sorry auto spell "am" not "American"

Don't really care about dimness and more about how it works to chose a led.. Bit sad.

this guy is a horrible teacher, can't follow him at all.

@ewanlister9262

8 жыл бұрын

+Brian Johnson What don't you understand that he said?