Pretty cheap and ez to find in the junk yards off of a 94 and down and the 92-98 jeep GRAND Cherokees have a 12.7 ratio steering box. Both are ez salvage yard finds

I swear it feel like you been doing KZread forever. You a natural tho. Keep it going my brother. Great work.

@87SSBOI

2 жыл бұрын

Yessir!! Thanks!!! Tryna help my PEOPLE 🦾

Came out clean!! 🏆🏆🏆I used to pull the Jeep shafts back in 2010, blast em, paint em and install. No need for all that now.! The little you save isn’t much. Might as well snatch a new one. All my projects run this one now. 🏁🏁 Keep the uploads coming fam!🏁🏁🏁

@87SSBOI

2 жыл бұрын

Yessir, same thing I said...just easier to buy new...save time and spend a few extra dollars 👌🏾

Great video was trying to figure out where to shave to fit it in. You the man.

@87SSBOI

Ай бұрын

🫡💯

Worked great I got them on a 85 regal no problems I changed the gear box also

@87SSBOI

2 жыл бұрын

🦾

Keep up the good work I'm currently working on an 84 Cutlass T Top flowing your progress . 💯

@87SSBOI

2 жыл бұрын

Yessir!!! Glad I could help🦾...we all we got! trust that process and keep connecting 👌🏾

Thank you for your video- Lord knows Hooker instructions are non existent for the modification to the steering column shaft for a G body. Three of my buddies and myself bought this for our Buick GN/Turbo T’s and tried to install it but obviously would not fit w/o the grinding of the column shaft- thank you for the info!

@87SSBOI

2 жыл бұрын

Yea it sucks...lol...that's why I made this vid...I've heard a few people say they didn't have to modify 👀👀👀...wish that was the case for me..lol

@87SSBOI

2 жыл бұрын

Thanks for watching and glad I could assist 🦾

👍🏾 definitely needed to see this video right on brotha 💯💪🏾

@87SSBOI

2 жыл бұрын

🙌🏾

lol our project looks alike.. I'm restoring the enjoy bay while my engine is away

@87SSBOI

2 жыл бұрын

Yessir!!! May as well get to it while it's free and clear 🦾

Great video and thanks for the intell. I'm ordering it now for my 86 SS. Oh yea.....I noticed the Panthers hat. Keep pounding.

@87SSBOI

2 жыл бұрын

Yessir!!! Thanks for coming thru!! Oh yea, Panthers all day 🦾🦾🦾

@Big_Country843

2 жыл бұрын

I just installed mine. Thanks for the again for the video. For whatever reason I didn't have to do any trimming on the shaft coming from the steering column and the screw screwed right through the factory hole. Now I have to take the screw out and put thread lock on them. Lol.

@87SSBOI

2 жыл бұрын

@@Big_Country843 Nice!!! Wish I didn't have to modify mine...lol...and yea I got ahead of myself and had to back my screws out to add the thread locker 🤦🏾‍♂️

It changes how straight your steering wheel is after you installed. It was your steering wheel straight? Sometimes you have to make sure and adjust it so the steering wheel is straight.

The Mechanic himself !

@87SSBOI

2 жыл бұрын

Lol...man stop it!! Just a regular smegular tryna get by...🤣🤣🤣

@jemelmonger

2 жыл бұрын

@@87SSBOI i feel you man

I have the half shaft ordered for the 96 to 05' S-10 for my 05' Blazer Not because i am installing Headers I hate the feel of the steering when driving Like a really bad B rated movie where the guy is on the steering wheel left right left right ....Only This is a real thing ! The rag joint is old and worn out I am even beting the owner before me hit a curb and ripped the rag joint ...Anyways It will save me one more thing The middle Spark plug being a tight fit ..You would have to use a deep socket with a square back to get a wrench on And back out the spark plug with 3 or 4 twist of the wrench Then by hand Pain in the ass Even worse had to watch your cross-threading going back it 2 more days waiting for my part Cant wait ...My Blazer btw is custom with copper paint ..a lift And offset tires Queen size bed And a kitchen pull out behind the tailgate My first love of cars was the 87 Monte Carlo SS My friend had a 84' LS Toronto Police pulled us over no less than 30 times in that thing ...Loved it

@87SSBOI

2 жыл бұрын

Nice bro!!! Thanks for the feedback 🦾🦾🦾

Came across your video helped me install mine . Thanks 👍🏽

@87SSBOI

2 жыл бұрын

Glad it helped ya bro 🦾🦾🦾

Great work man!!!! Great upgrade!!!!

@87SSBOI

2 жыл бұрын

Thanks 👌🏾🦾💯

Was that power steering box the original?..I wanna do the aftermarket quick steering box with a tighter ratio and was wondering if that would mount up..Thanks for the Video!

@87SSBOI

7 ай бұрын

Yea it was the OG…I have a new one now tho..it’s a small upgrade to the OG but nothing too crazy…p/n: 27-6550

Great vid! I'm about to install my Hooker shaft. Just wanted to say: the nut & bolt down by the steering box? I think you wanna take the steering shaft bolt out all the way to get the shaft to seat completely on the steering box gear. The steering gear has kind of a groove around it that the steering shaft bolt kinda slides through to hold everything in place. Don't wanna see you hit I64 with non-responsive steering.

@87SSBOI

2 жыл бұрын

I appreciate it man...I'm going to go back to take a look at that...safety 1st!!! have fun with that install!!!

Man I needed this video for my 84 SS

@87SSBOI

2 жыл бұрын

🦾🦾🦾

Great video man - i am going to do my ls swapped s10 - Thanks

@87SSBOI

Жыл бұрын

Thanks bro!!! It definitely makes a big difference too 🦾

Just the video I needed. Keep going!

@87SSBOI

2 жыл бұрын

Glad I could help 🦾

Just wanted to make sure you were all the way on the steering box, the guy's that rebuild steering boxes always cut the little tit off the end of the spline on the steering box so it doesn't interfere with after market shafts, good video

@87SSBOI

28 күн бұрын

🫡📝📝

I definitely got the jeep shaft a while back. Worth the upgrade

@87SSBOI

Жыл бұрын

Oh yea!!! Now I need a new steering gear box 🤦🏾‍♂️

@MountedMontersMagazine

10 ай бұрын

Im tryna get mine to shorten not sure if this one I bought is adjustable 🤷🏿‍♂️

I just ordered mine today hey thanks!

@87SSBOI

2 жыл бұрын

Yessir!!!🦾🦾🦾

Good job bro might as well change the steering seals

@87SSBOI

2 жыл бұрын

Thanks, I'll look into that 💯

I got one off eBay for a 84 Astro van. Cost $60. Took 6 minutes to install.

Thanks for sharing! I just ordered mine!

Good job bro 👍

@87SSBOI

2 жыл бұрын

Thanks 💯

There it go !!!! Easy money !!

@87SSBOI

2 жыл бұрын

Yessir!!!

Looks good bro

@87SSBOI

2 жыл бұрын

Thanks 💯

Where did you get that bold from the one that connects the shaft up to the steering wheel, i noticed mine needed a longer one

@87SSBOI

6 ай бұрын

Came in the box

read the back of the instructions, it says to file down a flat spot for the set screw on the steering box splines. you dont want the set screw on splines.

@87SSBOI

Жыл бұрын

Thanks 💯💯

@MrStevexcitement

Жыл бұрын

@@87SSBOI Yes Sir!

@towcars5550

Жыл бұрын

sounds good

Great videos man, do you know if that shaft fit a 79 Malibu? Thanks again for any help

@87SSBOI

2 жыл бұрын

Thanks man and yes it fits the 79 Malibu...all Gbody 78-88 👌🏾

If I change the steering shaft to jeep do I have to also change the gear box too or is ok with the original gear box on my 86 Monte

@87SSBOI

29 күн бұрын

OG is fine..that’s what I have

No more bullshit I love it brother nice job

@87SSBOI

Жыл бұрын

Thanks!!! It definitely makes a big difference!!!

What brand/color paint did use on that chassis? 👌🏼

@87SSBOI

2 жыл бұрын

VHT Roll Bar and Chassis Paint...Satin Black

just bought this for my girls 91 s10 that's got enough slop in the steering to feed a hog farm

@87SSBOI

Жыл бұрын

Lol...it will definitely fix the issue

Good and detailed bro. Does that shaft take all the play out the steering wheel ?

@87SSBOI

2 жыл бұрын

Kinda hard to tell with the vehicle immobile but from what I can tell right now it's about 90% better

@SS_Gang777

2 жыл бұрын

@@87SSBOI awesome 👌🏾

@87SSBOI

2 жыл бұрын

@@SS_Gang777 yessir🦾

Good evening, I have the same steering shaft and was wondering do you notice a lot of play in your steering wheel when driving?

@87SSBOI

10 ай бұрын

Nah…might be your gear box or your steering column giving u that issue

@connie2848

10 ай бұрын

@@87SSBOI yeah, I was thinking the steering column. Thanks for the advice.

Yes sirrrrrr 💪🏽

@87SSBOI

2 жыл бұрын

🦾

Did you replace the lower bearing? Swapping my 84ss for a jeep steering shaft and can’t decide if i should get the crown jeep bearing kit or the classic gm bearing kit

@87SSBOI

Жыл бұрын

Nah I didn't...I may in the near future

Would this work for a B body 96 impala ss seems like it uses the same gearing box an steering shaft

@87SSBOI

Жыл бұрын

I'm not sure

Hey man looks good! I just ordered mine after watching your video. How's the ride with the new one vs. The old ragjoint shaft?

@87SSBOI

Жыл бұрын

A lot better💯💯💯

Will this work on 1980 camaro

@87SSBOI

Жыл бұрын

Idk

my monte has a 5.3 with headers will this item help to no rub on headers no more...is there a difference between the jeep and this hooker one

@87SSBOI

Жыл бұрын

I'm pretty sure this will def help u with clearance issues...and I think this is pretty much a replica of the jeep shaft

@towcars5550

Жыл бұрын

@@87SSBOI thanks for the reply I could buy the jeep for 60$ but this one looks nice

What all suspension upgrades you done

@87SSBOI

2 жыл бұрын

Only rear QA1 coilovers so far...plan to do full front suspension this winter