My first thought was that's more than an exhaust system, then I look at the comments, lol. Sounds great man. I had a 3rd Gen RS with Flowmasters. Loved that car. Didn't sound nearly as good as yours.
@keithhamilton80042 ай бұрын
Sounds like one of those "Hot For Teacher" cams
@nsane992002 Жыл бұрын
Awesome car man I love my 86
@moneyandmuscle4002 жыл бұрын
A underneath video would be nice to see how you did the exhaust
@DREWSLENS4 жыл бұрын
Chopppin sounds good man!
@cajun9509
4 жыл бұрын
No doubt
@cajun9509
4 жыл бұрын
Yeah that's killer
@ArizonaArmory5 ай бұрын
Why did I read it as "back window exhaust"😭
@V8AmericanMuscleCar5 ай бұрын
Sounds great!
@mikemarks6562Ай бұрын
You know you put a cam in any car it’s gonna sound like this but I like to hear regular exhaust I’m gonna go look it up now … sounds good
@deanhummel7946 Жыл бұрын
Sharp looking camaro 👍
@strokerIROC7 ай бұрын
That sounds badass
@jacksonmarshallkramer508710 ай бұрын
Stock 305. Sounds beefy. Great exhaust.
@jeremytaylor4576Ай бұрын
That’s pretty well what my truck sounds like now, so basically not much difference?
@mustang88128222 ай бұрын
Had the same one,,,mine had nightrider gauges, not sure if that was original?
@NATIVEWARS Жыл бұрын
it's, totally stock, they all sound that way. are you at Mustang fan?
@Pete3916 ай бұрын
If your going to highlight the exhaust...You gotta get in and give it some throttle...
@MrYz250fman3 ай бұрын
I know a Jon Luttrell. Iberia MO
@redneckdrifter
3 ай бұрын
No relation that I know of.
@leannedale6357 Жыл бұрын
Which Black Widow mufflers are those?
@redneckdrifter
Жыл бұрын
They are the neighbor haters; the car is a street/strip car and I wanted people to understand they'd bitten off a tough race when it pulled up.
@mr.booshay Жыл бұрын
what cam does it have?
@redneckdrifter
Жыл бұрын
It's a custom grind from BluePrint Engines, it's a hydraulic roller with .638 in. intake/.622 in. exhaust lift and 251° intake/259° exhaust duration @ .050 in. lift
@JuanGomez-nz5be3 жыл бұрын
What's done to the car? And what type of black widow muffler?
@redneckdrifter
3 жыл бұрын
BluePrint Engines 600 HP/600 ftlbs of torque 454 small block Chevy, .638 in. intake/.622 in. exhaust lift and 251° intake/259° exhaust duration @ .050 in. lift roller camshaft, Aluminum 64cc chambered heads with 2.08 intake/1.60 exhaust valves and 220cc intake/67cc exhaust runners, Edelbrock Super Victor Intake, 950 CFM Holley Double Pumper, MSD 6AL Digital Ignition, Doug’s Long Tube Headers, Dual Exhaust with Black Widow Neighbor Hater mufflers.For the transmission I used a PATC Level Three Raptor 700R4, with a 2600 RPM non lock out Stall Converter and a B&M Megashifter. The rear end is a Strange Engineering S60, with S Trac posi, 3:73 gears, Strange Engineering chrome moly 35 spline axles and a Strange Engineering chrome moly drive shaft with 1350 U joints. The suspension is mostly stock, with poly bushings, relocated tubular Lower Control Arms on the Dana 60, welded in frame connectors and drag shocks up front with the front sway bar removed for weight transfer during launches.
@dustinbartolf3021
2 жыл бұрын
@@redneckdrifter where did you mount the black widow mufflers
@redneckdrifter
2 жыл бұрын
@@dustinbartolf3021 I have a lot of pics on my Facebook page of the build.
@dustinbartolf3021
2 жыл бұрын
@@redneckdrifter ok ill check them out then thx
@BlackMamba-wu3cz4 ай бұрын
Hi Suegro, i mean Bailey
@dcartellone26592 жыл бұрын
It's to bad GM doesn't make those tail lights anylonger.seen alot with faded light's.
@kmas8229
11 ай бұрын
Hawks Motorsports and Classic industries sells new ones now
Пікірлер: 35
Had an 86 . That’s more than an exhaust.
My first thought was that's more than an exhaust system, then I look at the comments, lol. Sounds great man. I had a 3rd Gen RS with Flowmasters. Loved that car. Didn't sound nearly as good as yours.
Sounds like one of those "Hot For Teacher" cams
Awesome car man I love my 86
A underneath video would be nice to see how you did the exhaust
Chopppin sounds good man!
@cajun9509
4 жыл бұрын
No doubt
@cajun9509
4 жыл бұрын
Yeah that's killer
Why did I read it as "back window exhaust"😭
Sounds great!
You know you put a cam in any car it’s gonna sound like this but I like to hear regular exhaust I’m gonna go look it up now … sounds good
Sharp looking camaro 👍
That sounds badass
Stock 305. Sounds beefy. Great exhaust.
That’s pretty well what my truck sounds like now, so basically not much difference?
Had the same one,,,mine had nightrider gauges, not sure if that was original?
it's, totally stock, they all sound that way. are you at Mustang fan?
If your going to highlight the exhaust...You gotta get in and give it some throttle...
I know a Jon Luttrell. Iberia MO
@redneckdrifter
3 ай бұрын
No relation that I know of.
Which Black Widow mufflers are those?
@redneckdrifter
Жыл бұрын
They are the neighbor haters; the car is a street/strip car and I wanted people to understand they'd bitten off a tough race when it pulled up.
what cam does it have?
@redneckdrifter
Жыл бұрын
It's a custom grind from BluePrint Engines, it's a hydraulic roller with .638 in. intake/.622 in. exhaust lift and 251° intake/259° exhaust duration @ .050 in. lift
What's done to the car? And what type of black widow muffler?
@redneckdrifter
3 жыл бұрын
BluePrint Engines 600 HP/600 ftlbs of torque 454 small block Chevy, .638 in. intake/.622 in. exhaust lift and 251° intake/259° exhaust duration @ .050 in. lift roller camshaft, Aluminum 64cc chambered heads with 2.08 intake/1.60 exhaust valves and 220cc intake/67cc exhaust runners, Edelbrock Super Victor Intake, 950 CFM Holley Double Pumper, MSD 6AL Digital Ignition, Doug’s Long Tube Headers, Dual Exhaust with Black Widow Neighbor Hater mufflers.For the transmission I used a PATC Level Three Raptor 700R4, with a 2600 RPM non lock out Stall Converter and a B&M Megashifter. The rear end is a Strange Engineering S60, with S Trac posi, 3:73 gears, Strange Engineering chrome moly 35 spline axles and a Strange Engineering chrome moly drive shaft with 1350 U joints. The suspension is mostly stock, with poly bushings, relocated tubular Lower Control Arms on the Dana 60, welded in frame connectors and drag shocks up front with the front sway bar removed for weight transfer during launches.
@dustinbartolf3021
2 жыл бұрын
@@redneckdrifter where did you mount the black widow mufflers
@redneckdrifter
2 жыл бұрын
@@dustinbartolf3021 I have a lot of pics on my Facebook page of the build.
@dustinbartolf3021
2 жыл бұрын
@@redneckdrifter ok ill check them out then thx
Hi Suegro, i mean Bailey
It's to bad GM doesn't make those tail lights anylonger.seen alot with faded light's.
@kmas8229
11 ай бұрын
Hawks Motorsports and Classic industries sells new ones now
That IS NOT a stock motor. Sounds sick.
@Jimbob-zn6bl
Жыл бұрын
383 stroker. Come get some idiot!!😡🚘
Sounds like it's got no power. Shallow