#84.2 - Gryphon C-40 Wet Bandsaw - Demo
Тәжірибелік нұсқаулар және стиль
www.halfinchshy.com/2013/05/gr...
Awhile ago, I posted a video review of the Gryphon C-40 wet bandsaw, but didn't really cut glass or curves. I didn't have the right stock on hand to cut up for curves then posted it too quickly. Mea culpa.
This video is the missing demos; we'll cut 8mm thick glass, porcelain tile, and natural travertine tile. All stock will get a straight cut, soft curves, then more aggressive curves. For the glass and porcelain tile, each cut is separate. On the large travertine tile, I made one long cut composed of the three segments.
Remember that I'm pretty new to this bandsaw and I could see how practice especially with a particular material would make for better tracking.
Пікірлер: 22
An impressive machine that would fit well into a studio that incorporates cut tiles in inlay and in accent roles. Thank you for your well produced videos. They are always very helpful.
Thanks! Great demo! I bought this to use on glass, and it's a wonderful tool. Thanks for posting the demo showing how to take apart and clean, too. Very helpful.
@HalfinchshyWWing
10 жыл бұрын
Thanks! :)
When doing tight curves like the butterfly wing, just saw past the line to the edge of the piece that will free up that last bit to be cut.
Nice Demo. Cheers 😃
Hi. Can i cut Quartz with 4 cms of wide with that diamond saw?
You need to lower the upper blade guide closer to the material to keep the blade from twisting.
@cristalquartz1
2 жыл бұрын
an it do that ? im thinking of one and hate it when blades twist
محتاج الماكينه دي حد عارف بتتباع فين في مصر
can you use this to cut bottles?
Any one knows where can I buy this machine?
Loved the demo! When you're cutting the tiles, are you using a heavy duty blade or just the stock blade that came with the saw?
@HalfinchshyWWing
10 жыл бұрын
Thanks! I only have the standard blade.
@diamondcuttingblade
Жыл бұрын
we are Chinese factory for producing this kind of blade😊
Nice video as usual Paul. I see you gotta really watch your fingers with this guy. Can this saw be used for cutting wood/plywood stock or is it for tile only?
@humboldthigh4269
5 жыл бұрын
there is not much danger of cutting your fingers with these diamond coated stainless steel bands.
How does it do with soft metals such as copper, brass, bronze, silver, etc? Nice demo. Thanks!
@diamondcuttingblade
2 ай бұрын
diamond band saw blade cut non metal materials, like glass, coral, stone, marble etc.,
I see you are bitten by the green bug.
Hunk of over priced plastic junk.