Great job sir. Glad that we aren't dealing with bad parts this time.

@ToltecMerc

Жыл бұрын

So true! Thanks!

Thank you for sharing and well done. It is nice when it is just the power supply. Getting it out of its casing was difficult.

@ToltecMerc

Жыл бұрын

I need a simple one every now and then. The case did put up a fight!

Another enjoyable video, I repaired one of those lately with 1sec 12V thanks . Glad to see you back.

@ToltecMerc

Жыл бұрын

Thank you! Congratulations! I didn't think I was gone that long.

Glad to see you back, thanks for the video...

@ToltecMerc

Жыл бұрын

Of course! Was I gone that long?

if the caps don't bite ya, the case will! I have never opened up one of those ps5 power supplies, but it looks like a real pain. Literally. Gj m8. Thanks for the vid

@ToltecMerc

Жыл бұрын

Just 2 screws but SO many plastic latches! Thanks for stopping by!

Nicely done! Looking forward to the next one! :)

@ToltecMerc

Жыл бұрын

Thank you! I'm working on the next one!

Ur the best guy ever thanks dude i fixed my ps5 power supply coz of ur videos good job 💯

@ToltecMerc

Жыл бұрын

I’m glad I could help! Congratulations!

Starting to really like your knowledge on the PS5

@ToltecMerc

8 ай бұрын

Thanks! I'm still learning the PS5. There is still a lot more to learn.

Nice win thanks for sharing

@ToltecMerc

Жыл бұрын

Thank you so much!

Very good sir, youre the best

@ToltecMerc

Жыл бұрын

Thank you! That's very kind of you!

Good job mate 👍

@ToltecMerc

11 ай бұрын

Thank you!

Yes, when the drive is not connected there isn't any action on the eject button. I just dislike when I get a proper boot sequence only to find there's no signal on the tv. Great job Toltec

@ToltecMerc

Жыл бұрын

Thanks for confirming that! Thank you, also, for coming by!

Thanx masters ❤️🇹🇷

@ToltecMerc

Жыл бұрын

Thanks for watching!

Good video 👍

@ToltecMerc

Жыл бұрын

Thank you very much!

keep trucking man. would love to chat if you ever get a chance!

Thanks 🙏

@ToltecMerc

Жыл бұрын

You're welcom!

1:16 keep looking at the top left of the towel you see something that looks like a roach or bed bug. Keep looking until the camera come back to the same spot and you see the bug is gone. And that’s how you bring bugs into your home.

Great video as always, do you have PS5 Southbridge readings you can share?

@ToltecMerc

Жыл бұрын

Sorry, I do not. I need to take a lot of measurements and make notes but there is never enough time.

just a question Im still self teaching myself alot about electronics repair. in this case when testing why did you put the red probe on ground instead of the black one? usually its reversed but im sure you had a reason for it. as always great fix love the videos i learn alot from you.

@MultiVoiceofreason

Жыл бұрын

That would be testing in diode mode to test for diode junctions

@ToltecMerc

Жыл бұрын

You can use diode mode however you like but having the positive probe on ground tends to give a reading more often than having the negative probe on ground. This is simply because of the way ICs are manufactured. If you use black probe on ground, quite often you just get OL reading. If you see diode readings listed online somewhere, the readings will normally be taken with red probe on ground.

@ItachiRyu

Жыл бұрын

@@ToltecMerc ah i see i did not know that. thank you for the reply looking forward to the next video.

Hi, thanks for help us,respect!I have problem with power supply adp-400dr , no power 12v ,zero V.On both capacitors main filter have 290-300v dc , i know must be 390v, where is missing 60v, i check nothing in short nothing burning, afc diode and mosfet is ok, and fet s too, i dont where i looking

@ngonohtc5724

2 ай бұрын

Same problem. Did you fine the solution

What could it be if make a beeps but no power or light, just beep, I got my electric service went down and I think after that it stop working

@ToltecMerc

11 ай бұрын

I think the HDMI encoder can cause this.

@XXFalopioXX

11 ай бұрын

@@ToltecMerc I try diferent cable and port but I will double check again

@ToltecMerc

11 ай бұрын

@@XXFalopioXX check for shorts around HDMI encoder IC.

I had bought a new 400DR to replace one that was giving no power. I installed the new 400DR into my system and plugged in cables to test but it still didn't turn on although I can feel my system was slightly hot to to touch. Any Tip? is the new PSU defective? is it the motherboard?

@ToltecMerc

Жыл бұрын

There could certainly be a problem on the main board. You would need to confirm that your supply is supplying 12V out. If it is outputting 12V, everything else happens on the mainboard.

Nice job. One tip only. Use it flat.(you know the whole issue with liquid metal)

@MultiVoiceofreason

Жыл бұрын

That was all blah blah it doesn't affect anything

@Thehustler01828

Жыл бұрын

@@MultiVoiceofreason Please dude, if you don't know the liquid metal density becomes like water at certain temperature, then you shouldn't give an opinion as if it's the revealed truth.

My ps5 has the same problem is dead,maibe it is the same problem?

any difference between 400ER and 400DR?

@ToltecMerc

Жыл бұрын

Yes, there are slight differences. Still similar as far as ICs used.

I am on my 4th PS5 PSU, got 3 of them burned in my drawer

good day, could I ask for a link to those chips 🫣thank you

@ToltecMerc

5 ай бұрын

www.mouser.com/ProductDetail/512-FCPF13N60NT

My PS5 wont turn after lightning struck right near my house, I already had sent in for diagnostics but they couldn’t do anything. Can I pay you to fix my PS5?

I've never seen a cockroach in the flesh and know little about them but I'm guessing the existence of cockroach remains in a console means that it came from a hell hole?

@ToltecMerc

Жыл бұрын

It usually means the environment it came from was not the cleanest. They thrive in those environments.

@Adrian_Finn

Жыл бұрын

@@ToltecMerc Thought as much. Thanks for the reply, great content as always.

I have two PS5 power supplies that I would like to send you, and I have tried to repair it but I have not found the problem. If I could repair it and make a video it would be great

Hi, thanks for help us,respect!I have problem with power supply adp-400dr , no power 12v ,zero V.On both capacitors main filter have 290-300v dc , i know must be 390v, where is missing 60v, i check nothing in short nothing burning, afc diode and mosfet is ok, and fet s too, i dont where i looking

@ngonohtc5724

Ай бұрын

Same problem. Did u find the solution