I love these boxes. Hope the best for your business. Hope it grows so big that they will be on Amazon. I will pray for you.

Thanks for sharing lovin that box

Wow these boxes are awesome looking and you seem to really care about quality.

so i think i have an idea that could help. multiple drawer configurations. a way to make this easier is having your box more like a snap on box for example, 2 drawer slide cut outs for every 5.75 inch drawer... it woulds be easier if they were a even 6. because than 2, 3inch drawers could fit in the same place. and then if you had the availale slots on the box frame and drawers you could sell more slides. i dont know if this was already thought of but im giving my 2 cents. best of luck to you my man

I am in need of a box ATM and right now there are a few things steering me away from Styrke and into other areas and i thought it would be useful for you to know so you may be able o make some changes in the future. 1 - Obviously the price. 4200 for a bottom chest is awfully close to what you'll get off the truck for a Mac tech series or a snap on box from the trade show. Currently macs tech series is 6900 but you get 3K in free tools. So essentially your locking yourself into buying mac tools you were probably going to buy eventually anyway and paying 4K for the box. Not it is a slightly smaller box. 67" wide, and i think 41" tall with less drawers but due to it being a name brand, the box holds more trade in value then yours if i ever choose to swap it in for an upgrade. On the flip side, if you can wait till Aug for the snap on trade show each year, people have been walking away with 68" epiqs around the 5K mark and i have even seen some 84" epiqs going for 6500. Now this doesn't mean id like to see this at a $1500 price pont. IMO this box would be a no brainer at 3500 bottom chest all day long. 2 - The drawer stiffeners. While they do make a difference, I would WAYYY rather see under side stiffeners over punched stiffeners. You and snap on actually do use the same 18 gauge steel for your drawers but snap on puts a couple rails on the bottom to stiffen the drawers and it makes a HUGE difference. Roll bead stiffiners are a super cheap alternative and over time the drawer will still sag and flex a bit. 3 - The SS top. This is more of a suggestion then a con but id rather have the option of tops then a forces SS. Some people like no top o their box or prefer rock guard. Your kinda shooting yourself in the foot by having it default SS. Might help reduce the initial cost as well and get it closer to the 3500 price point. People also tend to like paying for addons rather then a more expensive initial cost. The people who want a SS top would probably even come back and pay more then initial cost to have one and still feel good about their purchase. People also like to customize shit so having different top options creates a sense of personality and drives more people to your product. Also. Got to say it. The SS weld on the corners is kinda gross lol. 4 - The logo. This is very minor but it screams cheap on a box. Keep the logo simple. A typography style logo in the corner like all the other box's do. Maybe a giant S lime mac and snap on does on their big bottom drawer. Its a rip off for sure but its their design choice for a reason. It looks way better and draws more attention to the good looking box over a meh logo. 5 - For the top hutch, the peg board should be pushed away from the back of the box. make the back double wall and have the peg board on the inner wall. The last thing you need is al then peg sticks sticking out the back of your box to look ugly as shit and have people knock em in. 6 - Financing. Need more info on how it works. The rates all that jazz so i know what im getting into. Right now just on the price point and the deal with the drawer stiffeners alone, I would way rather buy that cheap fat boy box from Uncle wieners whole sale and wait till Aug. I just cant justify paying such a close price for a box that has such a key design flaw. That's my opinion however but i hope it helps you make some key changes to drive more attention to your business.

@styrkeindustries2966

6 жыл бұрын

I'm going to assume you're being genuine so I will respond...So first off, many of the cons you have mentioned have already been updated and have changed already. That's the nice thing about being a small company, it's easy to alter things. But I'll address them individually. 1. Price is very reasonable for what you get. Most customers who show up are surprised what they get for the money. I'm not taking advantage of anyone, my margins are very low as it is. Come see a box in person, they compare very well with tool truck stuff. 2. Already addressed. 3. Already addressed. Now fully welded out rather than what you see in this video. Also I offer rock guard on any surface you want. 4. You're welcome to buy a box without logo's. Everyone has their own taste. Honestly the company name and logo has some family heritage in it so it won't be changing. The style could possibly change. The Styrke logo is actually cast aluminum that is machined and polished after. So trust me, it's not "cheap" lol. Looks really cool in person. 5. Already addressed. Will be double walled. 6. If you send me a personal message, phone call, text, or contact me on facebook, I would be happy to go over the details of financing. It is third party since I'm a small business so I like to explain it fully to the individual that may want to use it. Thanks for your opinions, hope I didn't waste my time responding to a troll or a tool truck pumper. Cheers, Bob

@xxpr0nag3xx

6 жыл бұрын

No no not a troll comment and for sure not a truck pumper. Only own one snap on tool tbh lol. You should make an update vid showing the changes you made. Im sure people would give you more attention if you did. As for the price. Price is always going to suck. Your box does compare very well to a master series box as is and with the stiffeners and double wall it comes even closer, for sure. I won't debate that one bit. It more so is an issue with all the deals your can get via mac and snap on in comparison to yours. Mac and even matco usually have deals that supersede your pricing and sit in the sub 4K range. Id venture to say even if you ran summer time deals or student discounts to the 10% drop which i think is 3700 or something youll get a lot more traction. I know it sounds weird but being above 4K in terms of a box is sort of the thresh hold from cheap and affordable to close to snap on pricing. That is why strictly tool boxes best sellers are doing so good. All their best sellers are juuust under the 4K range. (i know its USD but the theory holds the same). I might actually come check out your stuff some time. Still havn't bought a box so if the changes have been made already then it might be worth it.

@miket6978

6 жыл бұрын

my snap on box was around 20k in a similar set up to the one in the video. 6500 is more than a fair price. mac boxes are way over priced for what you get, i don't see how you could compare the two tbh

Very nice 👍looks very high quality

I'm saving up for the lime green box with the Black Drawers and green anodized trim. I think you guys should Market that one along with an orange and black with orange anodized trim. You guys could really give snap on a run for their money. you're boxes look amazing . You've got to get the word out to more people. Maybe a plum crazy purple box.

Love that color

Great looking beefy toolbox

beautiful boxes

would love to see a walk around of the tool cart

good looking box

4:34. Stamp reinforcement is a good idea. Stamp should go down not up though. Do the drawers pull all the way out? If not that would be my other suggestion.

Do the drawers open all the way to get sockets in the very back ?

Nice dude

The draws don't come all the way out?

nice box what is the cost on the green one with the hutch Thanks Mark

When are they going to be available in the usa or how can I get one in BC and import it myself? Are you offering any top boxes yet? I have emailed off the website multiple times and have never gotten a response. Any information is greatly appreciated

Will you make a 55” double bay at some point?

Beautiful looking tool box. Would love to to have one. Would look great in my CMM room at work. Feel like driving to Windsor Ontario??

@styrkeindustries2966

5 жыл бұрын

Actually I have a guy willing to show his box off in Sudbury. Shoot me an email and I'll get you some contact info.

Any way you could do a review on the hutch door? I’d love to see what it looks like closed. Very interested in these boxes. Thanks

@styrkeindustries2966

5 жыл бұрын

I expect to have one posted within a month or so. Going to be doing a quick update on the small changes we did in this years build. Stay tuned!

Nice box.

GOD I WANT ONE!

I need this box in my life

I’d love a big split top cart...Snap On’s isn’t big enough for me.

Any takers for a 95th anniversary snap on box? I’d love to sell it to get one of these!

Nice box, looks like the “tool vault” one with them two locks

@Claps1775

5 жыл бұрын

What I thought when I seen the video too.

@tystruckautorepairservice4012

4 жыл бұрын

Same

Strictlytoolboxes box on demo?

I want one!

Need a video of the locker

will you be coming out with a top chest ?

Is there a top box for it?

Wondering if you have an update on the lockers. Saving for a little bit then looking to get a bigger box. Mind set on this one but would like to get with lockers and get everything all at once as apposed to separately.

@styrkeindustries2966

5 жыл бұрын

Have the steel purchased, if all goes well its looking like we will be wrapped up in June...Hopefully.

@mattb9803

5 жыл бұрын

@@styrkeindustries2966 well if all goes well saving wise that should be when I'm able to get the box anyway lol so perfect fingers crossed

I heard you speak of the stiffeners of the drawers......which is awesome by the way.....but I didn’t hear any info on how deep the drawers are. The thin ones in particular. I am in the market for a new box and fuck these tool trucks. This box looks awesome. I’d like more info.

@styrkeindustries2966

6 жыл бұрын

Thanks, if you want to check out all of the specs, head to the website www.styrke.ca. Drawers are 5.75", 3", and 12" deep. Feel free to send me an email if you have any more questions! Bob

Will the hutch fit a snap on 72 “ ? And will be availed in the USA

@styrkeindustries2966

6 жыл бұрын

Hutches are 72" by 28" deep, so it depends what model snap-on you have. And yes shipping to the U.S. is an option. Thanks, Bob

Hello i was seeing if i can get some information i love the setup and looking for a bigger box thank you

@styrkeindustries2966

5 жыл бұрын

Hi Robert, send an email to bgulbe@styrke.ca. I'll be happy to answer any questions you might have.

I checked your web site and as of right now I guess all you are offering is this box and hutch or did I miss something? I’m kinda in the market for another box but don’t need something this big. I do like all the features and Comstuction of these boxes though!!!!!

@styrkeindustries2966

6 жыл бұрын

Yeah the 72" box and hutch is the only thing we have currently for sale. Lockers are coming out later in the year, and I've finished up drawing for a 42" version. Thanks!

How much are these I’m a student I need a bigger box then my 55 inch is general

Nice I’m needing one for home use. What’s the ball park on those go for.

@styrkeindustries2966

6 жыл бұрын

Hey Gabe, check out the website or facebook page! Links under the video.

I'm happily surprised to see a Canadian small business rolling out a box with comparable, and even surpassing, to those on a tool truck. By no means a troll, and in contrast truly hoping a box bearing the "Made in Canada" pride to be successful in the States, I have comments in line with those from @xxpr0nag3xx, on pricing strategy and on branding. The superior quality is so obvious, there is no need of further comment. 1. Pricing: With the current exchange rates, the Stryke 72" is about $3,500 USD. At this price point, it starts to be competitive as a less recognized brand name. It is about 70% of a box of similar size from the tool truck. Also it is a few hundred dollars cheaper than Harbor Freight's ICON box, which uses lower quality bearing slides. 2. Customized tool storage: I suggest to team up with manufacturers of tool box organizers to have solutions specific for the dimensions of Stryke boxes. One of the example is Olsa Tools, which is also Canadian. 3. Branding: While fully respect the family heritage tribute, I do agree with @xxpr0nag3xx that the large logos take away my attention to the details of the box. At first impression my attention was all on the logo rather than the casters and the coated aluminium handles. Until Stryke becomes a well-recognized symbol of quality, the quality needs to scream to potential customers. I'd suggest subtle, smaller logos as high quality metal emblems on a corner.

Are there any third party reviews of these boxes?

@bobgulbe2585

4 жыл бұрын

All of the customer reviews are on the facebook page.

Wow nice box will you someday come out with the same box in 60 inch?

@styrkeindustries2966

5 жыл бұрын

Thanks! Yes we're working on a 54" version at the moment. Hope to release them in March/April.

@bushwalker2673

5 жыл бұрын

Styrke Industries your draw size and configuration is spot on I love it. 54 inch is a size I’d buy I’m in Quebec can I order one and have your ship it to me , with a stainless steel top? Thank you! I’ll make a video and promote the box if you like.

@styrkeindustries2966

5 жыл бұрын

@@bushwalker2673 You can certainly put your name down for one. Get in contact with me by phone or email and we can set it up. Thanks, Bob

How much money for that box

do you have a 42-46 inch version?

@styrkeindustries2966

5 жыл бұрын

Going to be bringing out a 54" some time this year.

Basically.

Do you sell to the US?

@styrkeindustries2966

5 жыл бұрын

Hi Michael, we sure can. Send an email to bgulbe@styrke.ca and we can work out the details.

HUCH LOCKS?

This box looks good

The only thing that this product needs is neon lights and a built in refrigerator.

you do realize those stamps on the bottom of all the drawers are going to cause tools to sit unlevel and fall over right? I wouldn't buy this box for that alone why not add extra slides under the drawers instead

@styrkeindustries2966

6 жыл бұрын

Thanks for the input. Although very minor and nearly unnoticeable when using the toolbox, I will be sure to take it into consideration in the future.

Is ISIS threatening to cut your head off in the background? Good lord man, tell us about the box already!

Hold the fuck up.... Red Deer.... I live in Red Deer.... shit I'd be down for one of those. What are the prices?

There website says the box is 4200 and hutch 2000. They also say they are fed up with over priced toolboxes. They are the same price for a smaller box. Cornwell and matco can get you in a 76 inch triple bay with hutch for 6500 and give you a tool credit when you buy a box. These guys are liars

@alexwilliamson92

6 жыл бұрын

Bryan Hudson what was it like the first time you blew your cousin?

@bryanhudson4645

6 жыл бұрын

That's your reply to a legitimate comment. I see your education lies somewhere tucked in the hills of bum fuck nowhere. The shit is just as expensive as any other toolbox, and its smaller. For them to advertise that they are techs who are tired of overpriced boxes and put out a product that is the same price for a smaller box says something about the business they are in. So, fuck off kid

@tonywong9095

6 жыл бұрын

Looking at the Cornwall CTS76BUBK and it's 4,995USD and Hutch CTS76HUBK is 2095USD. 7090USD is 9,056.91CAD, so 6200CAD for the Styrke is a much better deal. Unless dealers are selling the Cornwall for less?

@alexwilliamson92

6 жыл бұрын

Bryan Hudson I was being serious.

@bryanhudson4645

6 жыл бұрын

MSRP on internet is more than what it is on the truck

They say you dont pay for the name but it costs as much as the cornwell boxes I see on the truck. Disappointed!

@styrkeindustries2966

5 жыл бұрын

In case you hadn't noticed...we're a Canadian company, who sells in Canadian dollars.

@emery1ann1

5 жыл бұрын

@@styrkeindustries2966 ya, I noticed. I'm sure it's a great product ( it sure looks like it) but even in Canadian $ it doesnt change my statement. Roughly $3,300 (US) is on par with the premium tool truck that I see every week!

@lawman8877

4 жыл бұрын

Um a cornwell 84 inch box is over 10 grand and the snap on 84 inch is over 15 so 3000 for this box is way cheaper