#72 [Builder's view] "Ninja" Kawasaki GPZ900R vs. H2R under construction ...
Тәжірибелік нұсқаулар және стиль
[Builder's view] Aoshima GPZ900R and Tamiya H2R is in progress.
This time is the work of Ninja H2R.
I made a muffler.
The muffler of this Tamiya kit is a very beautiful plated part.
Since it is a great deal, I will make use of this plating and paint the muffler as if it was burnt by heat.
If you use a file to erase the gate marks, the plating will peel off excessively, so cut it carefully with a knife and paste a small piece of mirror finish from above to hide it.
For painting, use the three "color sources (Creos Mr.color/CR1 CR2 CR3)" of lacquer, and spray with an airbrush in order from the color you want to produce the most.
When I checked the actual vehicle, the muffler spring had anti-vibration rubber, so I put a heat-shrinkable tube over the muffler spring to express it.
(This is almost a Google translation)
Please follow me on SNS.
Twitter / nandemo_seisaku
Facebook page / nandemoseisaku
Instagram / nandemo_plamo
Пікірлер: 59
Always perfect workmanship! And those burnt pipes look super realistic...! Well done! 😎👍🏼
Merry Christmas! Looks great. Fabulous job on the exhaust coloring.
@kenji-plasticmodels
3 жыл бұрын
Merry christmas!🎅
お疲れ様です。 メッキを活かしての塗装、素晴らしいです。 色の素を使うと濁らずに美しい焼けが再現できますね。 ミラーフィニッシュでの修正は勉強になりました。 ありがとうございます。
Magnífico ....o grau de detalhes postos na peça crua impreciona .
マフラー焼けがありえない程に美しい!どうしたらこんなにナチュラルに仕上がるんだろう
メッキされた部品を見ると、構想もなくハイターに漬けていた自分が恥ずかしい
宝石のようなマフラー
I've viewed quite a few methods to replicate the heat stains, others use 4 to 6 different paints and they are just "Ok" but yours is by far most realistic (obviously) Oh and the brackets are a work of art. Sensei Merry Christmas to you and your family.
@kenji-plasticmodels
3 жыл бұрын
Thank you, Merry Christmas🎅
ん〜唸る…素晴らしい。
Looking good!!! 👌
Wow, fantastic finish on the exhaust. You have overcome the problem of plated parts - the sprue gate with Mirror Finish - an absolutely fantastic idea! Thank you also for introducing me to the concept of prime colours for exhausts. Do you think the Gaianotes primary colours would be as effective? It also highly dependant on the supreme shine of the base - in this case the chrome plate? Have you experienced it working as well on an Alclad or Tamiya LP finish? Thanks for your continued inspiration!!
@kenji-plasticmodels
3 жыл бұрын
Thank you for your comment. I've never used Gaianotes primary colors because I'm happy with the Creos colors ... I'm sorry. Alclad does not have the same effect as it loses its brilliance when coated on top.
Vibrant exhaust color 👍. Did you directly spray the lacquer over the chrome plating?
@kenji-plasticmodels
3 жыл бұрын
Yes😃
Maestro sin palabras otro gran capitulo de este armado del proyecto, mis respetos y saludos desde Venezuela.👍👍🙏
@kenji-plasticmodels
3 жыл бұрын
Gracias siempre Feliz Navidad🎅
@amilcarmoncada1801
3 жыл бұрын
@@kenji-plasticmodels Feliz Navidad para usted tambien,👊👍🙏
Exhaust was a masterpiece!
33:33 こんなのTVチャンピオンの世界じゃん・・・
すっごいなあ!!
Seguo tutti i tuoi video. Complimenti 👏👏👏👏
Looking good 👍
Wow Fantastic job, congrats...!!! What wire you used for the muffler spring brackets? what are those springs? and finally, what size of heat shrink was use on the springs? thanks and happy new year
@kenji-plasticmodels
3 жыл бұрын
Since the size is not written on the product, it is decided by appearance. The wire is 0.3mm, the spring is from the top studio, and the heat shrink tube is about 2mm. Thanks.
エキパイの焼け色すげぇ‼
ぼくが観始めたころは登録者4.4万人だったけど、いいペースで増えていますね。 将来的には数十万は固いですね。なんか嬉しいです^^
Which paint do you use more often for paint, acrilyc or enamel base
@kenji-plasticmodels
3 жыл бұрын
Basically I use lacquer(Creos Mr.color), water-based paint(Tamiya and vallejo) and enamel(Tamiya).
お疲れ様でした。H2Rってホント、フレーム周りの美しいバイクですね。カーボンモノコックとかにしなくて良かった。 マフラーのメガホンの処理は流石です。よくこんな事思いつきますね(笑)。
@kenji-plasticmodels
3 жыл бұрын
ありがとうございます🎅
図解さんの作っているものは最早模型ではないですね。縮小された本物です。芸術といっても過言ではないですね。
メッキパーツのゲート処理はどうするんだろう、ミラーテープかな…?と思ってたら予想が当たって嬉しかったです(笑)!でもそのあとのスプリングの工作でぶっ飛びました。相変わらず細部のこだわりに魅了されてます!
👍
メッキの上からでも綺麗に焼き色出るんですねぇ… 防振ゴムは熱収縮チューブでしょうか…?
@kenji-plasticmodels
3 жыл бұрын
そうです、一応説明欄に書いてます🎅
元パーツのメッキを活かしながらも、思いっきり手を入れた容赦ない特別感は何なんでしょうか? マフラーの焼け塗装は特にセンスを問われる所、繋ぎのスプリング自作といい凄い!
@kenji-plasticmodels
3 жыл бұрын
ありがとうございます🎅
That heating thing is that a lighter?
@kenji-plasticmodels
3 жыл бұрын
heated electronic lighter
チタン焼け塗装必ずと言って良いほど失敗するから参考になった。機会があればノズル経と圧どのくらいにしてるのか教えてほしいです
@kenji-plasticmodels
3 жыл бұрын
径は0.2を使っていて圧は弱めにやってます。が、径0.3でも大丈夫だと思います。
🙏🏼
また、息が止まって見てしまった☹️
😳🥇😱 unbeliveble
動画の手が自分の手よりデカくてまじ笑うw どれだけ小さい作業しているのやらwww おつかれです!
マフラースプリング留め、、、って見たら、気が遠くなりました。
毎回ながら「スッゲー」としか言いようがないw
hi, can you see a bike cyberpunk (Cdproject) / Death Stranding ( hideo Kojima) ?
Googleニュースで記事が出てて拝見して 「なるほどーメッキを生かして3色塗装すればこんなに”簡単”に綺麗に表現できるんだ。私もやってみようかな」 とか思いながら記事の動画リンク飛んで動画見てたら「あれ…この動画編集の仕方どこかで…」 記事のブログ名を確認、動画チャンネル名とチャンネル登録済みを確認 「スカイラインGTRとハーレー動画のなんでも制作日記の人じゃないですか!!やだもー!」 だれ?簡単とか言ったバカモノは…そんな簡単に真似できないし何よりマフラー内の再現とか何これ あぁ…でも出来なくても良いから何時か一度試してみたい…とこの方の動画は何時もそう思わせてくれるんですよね、色々凄い
@kenji-plasticmodels
3 жыл бұрын
ありがとうございます、ニュースにピックアップされたんですね。 色々見てくださってありがたいです。
サムネ実物定期
メッキパーツが変身した
塗るのは筆ですか??カップの塗料の量的にエアブラシじゃないですよね?
@kenji-plasticmodels
Жыл бұрын
エアブラシのほうが塗料は少なくて済みますね。うすめ液加えて5滴ぐらいあれば結構塗れますよ。(つまりエアブラシです)
今回もため息しか出ません。 とてもマネ出来ない。
The tidy beef inspiringly excuse because thermometer proximally suggest modulo a evanescent turtle. whole, mountainous climb
動画が長いような気がします。20分位がいいのでは?