There's just something about your videos that makes them extra special and unique. They provide the sense of sitting in on a university lecture. I always felt that the most knowledgeable in any subject are those with the ability to take complex subjects and relay that information in a manner which can be clearly understood, something you do with ease. Thank you so much!

@elewizard

6 ай бұрын

Thank you so much, I am so glad to hear this. Really appreciate your comment ❤️❤️❤️❤️❤️❤️

@mediamisfits3805

6 ай бұрын

It's his use of English.. it is clear, concise and at a very consistent speed

@ALEFILES

4 ай бұрын

@@elewizard Your English is so clear that you made a double purpose: help me to train my ear to understand better English talk, and at the same time to learn electronics... Thanks a lot! You have gained a new subscriber! Greetings from Argentina!😄

@stevemckennon5995

4 ай бұрын

Those bread boards are the best!

@jamespooler8809

3 ай бұрын

​@@elewizardi love working on electronics. I have done it for many years. When it comes to components, mostly just replacing, or following a diagram to build a circuit. I have always had trouble designing circuits. Mostly not 100% understanding the uses and why/how.i just discovered your channel today and have watched a few. I now understand why i have used the components that i have, not just because it is what the instructions say or what was there and broken. I just want to say thank you and keep it up.

Many many thanks for explaining how easy it is to use these little devils. I have lots of transistors, but never use them and stick to simple circuits for fun, but now that you have explained them to me, I will start to use them in my circuits and get all the benefits that they bring as well as enjoying electronics more. Thank you so much, Joe

@elewizard

6 ай бұрын

Glad to hear that, I am so happy for motivating you, 🥂

Another excellent review deepening my understanding. I'm an Amateur Radio operator and electronics hobbyist since childhood. This is an area that I clearly grasp but still was not fully confident. Logic was easy, but other applications are now much more clear. My Sansui QRX 7400a is clearly an example of class A B amplifying. But PWM and other applications I was not quite clear on. Your examples are very helpful, thanks again..

@elewizard

6 ай бұрын

Glad it was helpful! Thank you for sharing and watching

Ahhh, this is outstanding stuff for the audience you intended this for & I most definitely count myself as part of it! I'm in the "Super eager-to-learn electronics enthusiast w/zero formal schooling & 100% self-taught" & transistors are like the Next Big Step for me that I've procrastinated LIKE CRAZY on implementing in any of my projects all just bc of how intimidatingly arcane it was for me to try & learn even the basics about them w/o any primer. Pretty much any "intro" to transistors & semiconductors in general might as well be written in sanskrit if you don't have a grasp on the lexicon going in, so thank you for the effort to help bridge the gap for people like me!

@elewizard

6 күн бұрын

Thank you so much for being a part of the community. I appreciate your kind words ❤️

Exactly what I'm looking for. Not just the bare explanation of how a transistor works, but even several examples what they are doing and above all why that's important. Cause, I never understand realy why I should use a transistor as a switch after e.g. an push button. Direktly saved in my learning list! Thanks

@elewizard

6 ай бұрын

Glad it was helpful 😃 I will try to make more videos of this type 👍

Showing the practical applications really helps, thank-you!

@elewizard

6 ай бұрын

Glad it was helpful! Cheers 🥂

Absolutely outstanding presentation which leaves more room for more. Particularly interested in RF amplification applications and also discussions about filtering in all types of amplification using transistors. Terrific presentation as usual. Many thanks. 73, NZ5i

@elewizard

6 ай бұрын

Glad it was helpful! Thank you for watching ❤️

I would not call the simple 2-transistor current limiter a "switch." The main transistor is essentially switched ON below the current limiting threshold, but as that threshold is approached the whole circuit begins to operate in linear mode. It is important to remember that the main transistor power dissipation may be quite high and a heatsink may be required. This circuit isn't high precision and you'd get a moderate amount of variation from one unit to another, but it is plenty good enough for lots of applications.

@elewizard

6 ай бұрын

Good points, the circuit is not high precision, you have to add some other components to make it more precision. Components like OPAMP. I will explain it in one of my upcoming videos 👍

Your approach to teaching is unique, practica, clear and previous!! It’s seems all so natural and easy to explain these topics your way!! But it’s clear that there is a lot of preparation An planning before each video. Thank you very much!! I just discovered you today but U will come back often!

@elewizard

5 ай бұрын

Wow, glad you think so, Thank you! 😃

In a simple and short words "you are just amazing man"

@elewizard

6 ай бұрын

Thank you so much ❤️❤️❤️❤️

Man, this is a very comprehensive video with very interesting applications. Thank you so much!

@elewizard

6 ай бұрын

Thank you for watching and supporting me ❤️

I refreshed my memories especially about Switching, for me, transistors will always be switches though 😂 thank you so much for this video

@elewizard

6 ай бұрын

You're so welcome! Thank you for watching 🍻

Excellent content with good examples! Thank you!

@elewizard

6 ай бұрын

You're very welcome! Cheers 🥂

I discovered you few hours ago. I subscribed after first 5 minutes. Thank you for your work. Your content is so good. Greetings from Romania.

@elewizard

4 ай бұрын

Welcome aboard! Thank you for watching 😊

You are great not because of details of electronics but also easy understandable english

@elewizard

Ай бұрын

Thank you dude, not because of your support, but also because of your kindness 😉

Thank you sir, now I know how touch buttons on certain old elevators work on the inside ! I’m a lift mechanic and nobody could explain it to me on a component level!

@elewizard

6 ай бұрын

Touch sensors can be made by using several different methods. Now you learned one of them 🍻

@maxgood42

6 ай бұрын

Yes it's like sales people that read from the back of the box, but this is all very interesting. I guess there is an attitude to things that, nobody expects anyone to use a soldering iron any more.

this is one of the best videos i've seen about transistors. i found this so helpful thank you :)

@elewizard

4 ай бұрын

Glad to hear that, cheers 🥂

Salam dorud. I suspect you're Iranian. That makes you the second great Iranian electronics teacher I've found on YT. You're tutorials and contents are fantastic and you're channel will grow fast. I'm from Tehran.

@elewizard

5 ай бұрын

Hi my friend. Glad you think so, accept my warm welcomes from ardabil

@s.m.h.m8804

5 ай бұрын

@@elewizard Thank you sir. Benım anne tarafim de Ardebidiler. Sağolun abi.

Thanks for practical applications.

@elewizard

3 ай бұрын

You are welcome!❤️❤️❤️

Thank you for taking the time to do these videos!

@elewizard

3 ай бұрын

Thank you for being a part of this journey! ❤️

"trite" - awesome. that is a better word choice than most native speakers would make. i had to watch this again after your recent transistor magnum opus.

@elewizard

2 ай бұрын

Thank you my friend for encouraging me ❤️❤️❤️❤️ BTW, gratitude for the £2 Super Thanks support! 🙌

Great way of high side switching n-channel mosfets.... Use photovoltaic opto isolators. The isolator's output can be floated on the mosfets source. Thus gate-source voltage can always go high enough to ensure full on.

@elewizard

6 ай бұрын

Thanks for sharing❤️

@d614gakadoug9

6 ай бұрын

Photovoltaic couplers are generally pretty slow and the last time I looked (years ago) they were quite expensive. Still, they are a good solution for some applications.

Excellent video. Thanks for putting time to make it 🎉

@elewizard

6 ай бұрын

My pleasure 😊

Your videos are helpful and you are a great instructor!

@elewizard

4 ай бұрын

Glad you think so!🍻

Good video! I would like to see more information on how to create constant current supply for led and laser diodes. There’s not a lot of very good videos on cc supply. Cheers!

@elewizard

6 ай бұрын

Noted! Thank you❤️

this is the content i wish i had a long time ago…very nice!

@elewizard

4 ай бұрын

Glad to hear that 😃

Just subscribed your channel for your beautiful explanation with practical knowledge. Keep it up. Lots of love from INDIA..

@elewizard

Ай бұрын

You are very welcome my Indian friend 😃

Awesome video, I will be waiting for more.

@elewizard

6 ай бұрын

More to come!

Thank you for the explanation, I learned a lot. I subscribed to your channel. I hope to learn much more. Blessings to you. Best regards.

@elewizard

6 ай бұрын

Thanks and welcome ❤️❤️

You electronics freaks are a rare breed and I don’t mean that in a bad way. How you people understand how those components work is beyond me.

@elewizard

5 ай бұрын

Experience, that is the key 🗝

"Wizard" - beautifully organized components in background - in-deph articulation of the topic yes yes yes

@elewizard

6 ай бұрын

So glad you think so

Your description is very helpfull ever

@elewizard

2 ай бұрын

I appreciate your kind words! 😊

Thanks for the video.

@elewizard

6 ай бұрын

You are most welcome

Amazing channel. You are a stellar teacher. Subscribed

@elewizard

3 ай бұрын

Thanks for watching and for the encouraging comment! Your support motivates me to create more content!

very very very very very useful channel! Thank you a lot , continue like that 🙏 I have idea why You sir don't use a plastic table to draw not loose paper 🙂.

@elewizard

6 ай бұрын

You are very welcome ❤️ Thank you for the point

Well, I'm positive i learned something new - but i also feel i may need to watch this many more times! Easy to understand once you get used to his accent and speech speed.

@elewizard

4 ай бұрын

Keep watching. And I will keep improving my accent and speech 👍😊

What a great approach. I grew up at age 10 playing with 1n914

@elewizard

4 ай бұрын

I grew up with LM7805 😅

@stevemckennon5995

3 ай бұрын

Great regulators.

Super explanation. ❤

@elewizard

6 ай бұрын

Thank you 🙂

Sir, I love how you teach~

@elewizard

6 ай бұрын

Wow, thank you ❤️❤️

Great contents as always ,congrats. Could you make a video explaining inductor the same as this video(example: how exactly inductor oposes the Change in current,)please Iam stuck in electronics until I grasp this

@elewizard

6 ай бұрын

Yes, it is in my todo list 🙃

@mangakadomingos292

6 ай бұрын

@@elewizard waiting for it

as i am mechanical engineer your deep discusion is awaysome

@elewizard

5 ай бұрын

So nice of you 😊

Nice explanation is from nice one

@elewizard

6 ай бұрын

Keep watching❤️

Good info.

@elewizard

6 ай бұрын

Glad you think so!

Nice video, well done, thanks for sharing it with us :)

@elewizard

4 ай бұрын

Thanks for watching!😊

Wonderful 👍

@elewizard

4 ай бұрын

Thank you! Cheers!

Do you have any videos on capacitor dump circuit? Thank you sir.

@elewizard

6 ай бұрын

Not yet 🙃

Thakn you so much sir we need your Gidence Anyone not give information like this

@elewizard

6 ай бұрын

You are most welcome ❤️ I will do my best

S0 nice thanks sir

@elewizard

6 ай бұрын

You are most welcome

Well done

@elewizard

6 ай бұрын

Thank you ❤️

Great video!

@elewizard

6 ай бұрын

Glad you enjoyed it

Much obliged.

@elewizard

6 ай бұрын

Thank you so much ❤️

tesekkurler gardas!

@elewizard

3 ай бұрын

Thank you too my friend ❤️❤️❤️

Perfect sir

@elewizard

6 ай бұрын

Thank you so much

Those things u mentioned at the end are what I thought you will talk about in this video.

@elewizard

27 күн бұрын

My bad 😁

i sure could use your help

@elewizard

3 ай бұрын

It is my pleasure to help you ❤️

Thanks!

@elewizard

5 ай бұрын

Thank you so much my friend ❤️

Super sir 🙏

@elewizard

6 ай бұрын

Glad to hear that

16:50 نفس الإجراء يستخدم في مكبر الصوت للخلق استقرار في التيار عند سخونة الترانزيستر

@elewizard

3 ай бұрын

Thank you for the point

3:02 "Since BD139 is an NPN type BJT transistor, it is better to use it to switch Ground voltage" but why ?

@elewizard

6 ай бұрын

There are several reasons. See this video kzread.info/dash/bejne/fmSF1MOMidSepNo.htmlsi=gcBXkraxCiDBjlcK

Isn't there typically an emitter resistor for a common collector configuration?

@elewizard

6 ай бұрын

it depends on the load, the load may need a resistor or not!

@Enigma758

6 ай бұрын

@@elewizard Thanks, I see that, but won't a load such as a motor vary in impedance at different speeds?

@d614gakadoug9

6 ай бұрын

@@Enigma758 A common collector (CC) amplifier or "emitter follower" is a good circuit to use when you want to apply a constant (but variable as required) voltage to a load that varies in impedance. Remember that an ideal voltage source has zero output impedance - the voltage stays constant no matter what current is drawn from the source. The CC amplifier has high input impedance and low output impedance. The output impedance isn't zero, so you don't get a perfect voltage source, but it is low. Just what the ratio of input impedance to output impedance actually is depends on the current gain of the transistor. The higher the gain the higher the ratio of input to output impedance. That gain will vary somewhat from one unit to another of the same type and will vary with temperature. Usually with a DC motor with brushes what you want to do is control the speed , which is reasonably proportional to the applied voltage. If the mechanical load increases while the applied voltage is kept constant, the current increases, and vice versa. That low output impedance of the CC amp is just what you need. Overall the performance isn't great, but can be quite adequate for lots of purposes. (If you need really good speed control you'd typically use a tachometer in a closed-loop system, though you can do a pretty good job by measuring the back-EMF from the motor, which tends to be very linear with speed). There are circuits where you might add some extra resistance in the emitter circuit of a CC amp but that moves the circuit farther away from being an ideal voltage source if the load is in series with the added resistor. If a CC amp is used as the final output stage of an amplifier with feedback, sometimes a small resistance is used to isolate capacitance that may be present with the load. Capacitance can cause a phase shift that can play havoc with the stability of the system and the resistor can mitigate the problem. This is common with audio power amplifiers. Both JFETs and MOSFETs can be used in "source follower" (common drain) circuits for extremely high input impedance. The difference between gate voltage and source voltage is not as well defined as with BJTs.

@elewizard

6 ай бұрын

Yes, it varies. So what? There is no need to a resistor there

@Enigma758

6 ай бұрын

@@elewizard OK

Thank you

@elewizard

5 ай бұрын

You're welcome

At 25.04, should the motor not be connected to the collector?

@elewizard

4 ай бұрын

Nope, this configuration is called "Common collector" the circuit is OK. There is a dedicated video about this circuit on the channel. Look for DC motor speed controller video on the channel for detailed information on this subject.

Great video. Didnt you have another channel ?

@elewizard

6 ай бұрын

I had one, but it is not available now 😉

داداش دمت گرم عالی بود

@elewizard

6 ай бұрын

Thank you dude, keep watching ❤️

🤯

I would happily pay 50-60$ to get a pdf/book with those informative videos' contents

@elewizard

6 ай бұрын

😃

nice

@elewizard

6 ай бұрын

Thanks

Good info, the audio makes it hard to listen though. Please process your audio or by a good microphone

@elewizard

6 ай бұрын

Thanks for the point ❤️

@JohnJames-xj7df

6 ай бұрын

@elewizard I have similar vice type and without filter the sound is not good. In order to avoid post processing my audio every time I use Sure MV7 with their software. Once you setup the filters the audio is good every time. My configuration for creating KZread videos is: I use SurePlus Motiv for the microphone , then it goes into NVidia Broadcast as I apply some extra filters and background blur, and then it goes into OBS Studio. I don't use filters in OBS though it has plenty. Just to setup my scenes, screen. My first video had terrible audio when I used my Webcam microphone.

@elewizard

6 ай бұрын

Very interesting, thank you for sharing

pls teach other applications of the transistor

@elewizard

6 ай бұрын

Will try 👍

When switching a motor or anything else with a coil, use a feedback diode! This is to avoid/cancel back EMF. Without it can ruin your funny experiments with transistors pretty soon.

@elewizard

6 ай бұрын

Yeah, this point is covered in another video of mine 👍👍

👌👍

@elewizard

6 ай бұрын

❤️❤️❤️❤️❤️

💖💖💖💖

@elewizard

6 ай бұрын

❤️❤️❤️❤️

TRAN = Vietnam for - I learned that!

❤❤❤❤

@elewizard

5 ай бұрын

Welcome abdulbari❤️

sri,could make a vedio about the RF remote control circuit

@elewizard

5 ай бұрын

Certainly, it is my todo list 👍

You sadly forgot about/didn't cover the capacitance multiplier circuit, works like a charm..

@elewizard

6 ай бұрын

Yes, I didn't cover cap multiplier and also many other usages of transistors to keep video time reasonable

transistors have insane applications, i dont see how people could struggle with em.

@elewizard

6 ай бұрын

Maybe

@thedoopa3169

6 ай бұрын

@@elewizard its true. Not only for integration of small electronics into big machines, but you can add complexity to circuits simply by having an entire secondary circuit connected via transistor. I use them for all sorts of stuff, almost as much as I use diodes.

@elewizard

6 ай бұрын

Thank you for sharing 👍❤️

One type of transistor serves as an inverter in one piece. Solar power banks use it for the Nokia 5110,6110,7110 series. The transistor can invert the 3.2v safely to 6.9 v when loaded, and can operate a 6 v cleaner motor at high speed from a little 3.7 v Nokia battery.

That's what I'm trying to do switching the whole circuit without passive power drain, but I have yet to find a suitable BJT transistor with enough Hfe

@elewizard

6 ай бұрын

Use alltransistors.com to find suitable part number

you are besttttttt

@elewizard

4 ай бұрын

So nice of you ❤️

I want occilation circuit with a single transistor with detailed inner and outer function and working of transistor

@elewizard

6 ай бұрын

Will try 👍 Thank you for suggestion

Please make a wireless radio receiver circuit using transistor...

@elewizard

4 ай бұрын

Will do

Yeah, WOW man. Wizard actual. You seem to use English far better than many of my American neighbors lol. I'm already using a custom open source 'Solid State Tesla oscillator' circuit (by Master Ivo), employing SiC power mosfets, running a [bifilar pancake] Tesla Coil based 'single wire transmission line', improvising simple little analog circuitry for probing my system. Even so, this vid managed to: a. Rock my world b. knock my socks c. cause me to execute a backflip Question: How would YOU replicate Tesla's trick of using an old telephone handset to 'listen in' for null points along a [scalar/longitudinal]TX line? F resonant is around 120kHz, must i use a heterodyne to get audible tones, or can it be managed more simply? I think Tesla was also using telephone handset with a 'coherer' RF detector to make just periodic 'beeps' out around NYC while his transmitter was oscillating. A simple 'periodic beeper' to sound off when my step-down 'receiver' transformer is getting power from the line (or spherical terminal), would be helpful for me to demonstrate reception inside a grounded faraday cage too - any tips, my guy? ❤ cold

wow washing someone describing my hobby in such a confusing way troubles me. first vacuum tubes and FET field Effect Transistors are voltage contorled devices. a BJT is NOT Binary Junction Transistors are current controlled. I stopped counting at 30 misleading statements, If anyone wants to learn electronics this is not the channel. a great example of " If you can't dazzle them with brilliance baffle them with BS "

@elewizard

5 ай бұрын

Thank you so much for your feedback ❤️

درود آقای مهندس و خسته نباشی آدرس پیج فارسی تون چیه.؟

@elewizard

6 ай бұрын

Hi there, @Artamicro

Emitter foliowe is not as beautiful as it was presented:)

@elewizard

6 ай бұрын

Wow, thank you😃

استاد ما انگلیسی نمی‌فهمیم چه کنیم؟ دلمون خوش بود یکی فارسی خوشگل توضیح میده که شما هم زدی کانال لندن

@elewizard

3 ай бұрын

Try improving your English, so you can use many high quality content ❤️ try it my friend, you can do it

الفكرة ليست بجديد ههه

@elewizard

6 ай бұрын

Maybe

you call your video an explaining of transisror uses??? hhhhhhhhhhhhh

@elewizard

6 ай бұрын

Yes

@kougaz

6 ай бұрын

an advice: stop@@elewizard

i dont get it and your accent is difficult to follow...

@elewizard

6 ай бұрын

It made me sad. Sorry for that❤️

@sidthemyth

6 ай бұрын

try a more organic video. maybe it s less pauses that way... and show more!@@elewizard

@elewizard

6 ай бұрын

I think less pauses means more idle time.

@sidthemyth

6 ай бұрын

how is that? the less you pause the less you idle.@@elewizard

@nathanbruce1992

5 ай бұрын

​@@elewizardI thought it was great and didnt have issues with your accent. Cheers mate

You aren't educated!

....IMHO: I think that for many people, working with various "electronic" devices, etc., we often find that, if any circuit board "craps out", it's often faster, and cheaper to just replace the "entire board(s)", rather than trying to sort out any specific faulty components on the "bad board"...So, although we may study "transistors", and solid state devices',... unless we specialize in being an electronics repairman/bench technician",... we never get "good" at finding specific "faulty components", and replacing "them".... instead, we merely replace larger boards, entirely...

@elewizard

3 ай бұрын

Thank you for your comment 👍 I think your opinion is right in most cases