good job getting excellence and skills and teamwork 4th! see you at worlds!
@Samuel_Cheng
5 ай бұрын
thx
@phanlegiabao48095 ай бұрын
You’re very good in every year
@CheeseMasters20145 ай бұрын
Nice! See you at states!
@GCSE_Visy4 ай бұрын
Cya at Worlds!
@flyingcheese22608a5 ай бұрын
Great job! You don't need a 4m intake.
@Samuel_Cheng
5 ай бұрын
nah, it isn't good enough
@samuelchengsbiggestfan
2 ай бұрын
@@Samuel_Cheng anything you do is good enough
@thecappedpin5 ай бұрын
good job
@badhrigamez83355 ай бұрын
W
@Ninjacookie3315 ай бұрын
Nice
@madisoglrobotics5 ай бұрын
I better end up getting my cookie Edit: 150 AVERAGE WTF NERF SAMUEL
@Samuel_Cheng
5 ай бұрын
I'll have the cookie, don't worry lol
@Ultra-nl7mv
2 ай бұрын
@@Samuel_Chengd-do u have the cookie for me
@samuelchengsbiggestfan
2 ай бұрын
@@Ultra-nl7mv no fattie
@Ultra-nl7mv
2 ай бұрын
@@samuelchengsbiggestfan i got my cookie
@alexanderchen53805 ай бұрын
cool
@sus_CubeRealm5 ай бұрын
noice
@Pokegame9455 ай бұрын
nice
@HappyChap85 ай бұрын
New drivers?????? Don't remember seeing either of them in pitching in or slapshot.
@madisoglrobotics
5 ай бұрын
Pretty sure there that same drivers and are a 2 person team
@Samuel_Cheng
4 ай бұрын
We have a new teammate this year:)
@madisoglrobotics
4 ай бұрын
@@Samuel_Cheng oh mb
@lydialiu-pr2hg3 ай бұрын
See you at worlds :)
@samuelchengsbiggestfan
2 ай бұрын
too bad you lost haha
@Lee-squak5 ай бұрын
awsome job guys
@user-vr1ml1qh9m5 ай бұрын
Do you use any sensors in your auton?
@lydialiu-pr2hg3 ай бұрын
I’m 2076A
@samuelchengsbiggestfan
2 ай бұрын
who asked
@jamiezhang82645 ай бұрын
Samuel W
@user-vr1ml1qh9m5 ай бұрын
Can you tell me the placement of gears and sprockets used to connect the motor to intake?
@Samuel_Cheng
5 ай бұрын
it's below the lift
@user-vr1ml1qh9m
5 ай бұрын
Thx
@samuelchengsbiggestfan
2 ай бұрын
@@Samuel_Cheng useful king helping put the peasents so sweet of you
@flyingcheese22608a5 ай бұрын
The stream on youtube was from the other field's angle, the view was blocked during your final game. We saw a clear supply zone with 2 partial park, how come 135?
@Ethan404error
5 ай бұрын
There is still a green block in the supply zone 😢
@Samuel_Cheng
5 ай бұрын
we did not cleared a green block stuck in the corner
@williamschaible73244 ай бұрын
My bot is like the wanna be version of this lol
@samuelchengsbiggestfan
2 ай бұрын
of course its a wanna be version no one can beat the ultimate king smauel cheng
@DonGrinshook5 ай бұрын
Do you use rack and pin or tank treads?
@Samuel_Cheng
5 ай бұрын
for which part of the robot
@ultranoobthing
5 ай бұрын
@@Samuel_Cheng i think he means if u use chain elevator or linear
@CheeseMasters20145 ай бұрын
What song?
@delialiu1800
4 ай бұрын
Counting stars
@anonymou-mj4jc5 ай бұрын
Do you have a suspension wall or just a normal rubber band wall?
@Samuel_Cheng
5 ай бұрын
normal rubber band wall works best for us but I don't recommend it
@khwaishdoshi
5 ай бұрын
good question i personally think its suspension cuz my team used that in nationals and it worked out quite well actually
@swiftgamer9094
5 ай бұрын
@@Samuel_Chengwhy not ?
@baby23804
4 ай бұрын
@VEx464
4 ай бұрын
whats a suspension wall
@bezaurgessa88254 ай бұрын
do you have a source code for the autonomous?
@anonymou-mj4jc5 ай бұрын
How is your drivetrain so fast, while still turning fine. Also are you planning to use pneumatics.
@Samuel_Cheng
5 ай бұрын
we use 2 to 1 gear ratio, and yes we're planning on using pneumatics
@madisoglrobotics
5 ай бұрын
@@Samuel_Chengfor what???
@anonymou-mj4jc
5 ай бұрын
@@madisoglrobotics I am guessing PTO. Also our drivetrain is 3:2 but it struggles to turn, how does your 2:1 gear ratio have enough torque for that? Our drive has low friction, and our robots not even that heavy.
@madisoglrobotics
5 ай бұрын
@@anonymou-mj4jc ours is 2:1 and our 3:2 doesn’t work. However, try metal shafts they make a use difference
@anonymou-mj4jc
5 ай бұрын
@@madisoglrobotics we use metal shafts. Maybe it is a motor problem, because I am not sure our robot is that heavy
@velocity68675 ай бұрын
How is the turning so good even though your drive is 2:1 and the bot seems so heavy?
@Samuel_Cheng
5 ай бұрын
the robot is pretty light compared to other teams
@josuecastaneda83275 ай бұрын
Samuel how do you make it that your intake doesn’t jam
@aasrobotics9198
5 ай бұрын
It's possible. My team(95133B) has an intake that can not jam.
@Samuel_Cheng
5 ай бұрын
our intake isn't that smooth
@swiftgamer9094
5 ай бұрын
@@aasrobotics9198 magimid
@ragergamers
4 ай бұрын
@@aasrobotics9198 that’s bc ur magikid
@badhrigamez83355 ай бұрын
R u gonna post tournament recap?
@aHubzzz
5 ай бұрын
Nope he lost
@aHubzzz
5 ай бұрын
He got 3rd in finals
@Samuel_Cheng
5 ай бұрын
maybe
@badhrigamez8335
5 ай бұрын
@@aHubzzz Ik he didn't win finals, but he still had some really good scores.
@MADDY-94927H
3 ай бұрын
wdym 3rd isnt losing, or is it?
@peakybaron334 ай бұрын
239 xalm; olur a kisi
@Vexguy15 ай бұрын
Capped pins aren’t beating this
@cstial5 ай бұрын
Hehe i beat your teamwork and driving skills.. still 10 points off from beating your auto and 150 average 😢 Great job!
Пікірлер: 82
good job getting excellence and skills and teamwork 4th! see you at worlds!
@Samuel_Cheng
5 ай бұрын
thx
You’re very good in every year
Nice! See you at states!
Cya at Worlds!
Great job! You don't need a 4m intake.
@Samuel_Cheng
5 ай бұрын
nah, it isn't good enough
@samuelchengsbiggestfan
2 ай бұрын
@@Samuel_Cheng anything you do is good enough
good job
W
Nice
I better end up getting my cookie Edit: 150 AVERAGE WTF NERF SAMUEL
@Samuel_Cheng
5 ай бұрын
I'll have the cookie, don't worry lol
@Ultra-nl7mv
2 ай бұрын
@@Samuel_Chengd-do u have the cookie for me
@samuelchengsbiggestfan
2 ай бұрын
@@Ultra-nl7mv no fattie
@Ultra-nl7mv
2 ай бұрын
@@samuelchengsbiggestfan i got my cookie
cool
noice
nice
New drivers?????? Don't remember seeing either of them in pitching in or slapshot.
@madisoglrobotics
5 ай бұрын
Pretty sure there that same drivers and are a 2 person team
@Samuel_Cheng
4 ай бұрын
We have a new teammate this year:)
@madisoglrobotics
4 ай бұрын
@@Samuel_Cheng oh mb
See you at worlds :)
@samuelchengsbiggestfan
2 ай бұрын
too bad you lost haha
awsome job guys
Do you use any sensors in your auton?
I’m 2076A
@samuelchengsbiggestfan
2 ай бұрын
who asked
Samuel W
Can you tell me the placement of gears and sprockets used to connect the motor to intake?
@Samuel_Cheng
5 ай бұрын
it's below the lift
@user-vr1ml1qh9m
5 ай бұрын
Thx
@samuelchengsbiggestfan
2 ай бұрын
@@Samuel_Cheng useful king helping put the peasents so sweet of you
The stream on youtube was from the other field's angle, the view was blocked during your final game. We saw a clear supply zone with 2 partial park, how come 135?
@Ethan404error
5 ай бұрын
There is still a green block in the supply zone 😢
@Samuel_Cheng
5 ай бұрын
we did not cleared a green block stuck in the corner
My bot is like the wanna be version of this lol
@samuelchengsbiggestfan
2 ай бұрын
of course its a wanna be version no one can beat the ultimate king smauel cheng
Do you use rack and pin or tank treads?
@Samuel_Cheng
5 ай бұрын
for which part of the robot
@ultranoobthing
5 ай бұрын
@@Samuel_Cheng i think he means if u use chain elevator or linear
What song?
@delialiu1800
4 ай бұрын
Counting stars
Do you have a suspension wall or just a normal rubber band wall?
@Samuel_Cheng
5 ай бұрын
normal rubber band wall works best for us but I don't recommend it
@khwaishdoshi
5 ай бұрын
good question i personally think its suspension cuz my team used that in nationals and it worked out quite well actually
@swiftgamer9094
5 ай бұрын
@@Samuel_Chengwhy not ?
@baby23804
4 ай бұрын
@VEx464
4 ай бұрын
whats a suspension wall
do you have a source code for the autonomous?
How is your drivetrain so fast, while still turning fine. Also are you planning to use pneumatics.
@Samuel_Cheng
5 ай бұрын
we use 2 to 1 gear ratio, and yes we're planning on using pneumatics
@madisoglrobotics
5 ай бұрын
@@Samuel_Chengfor what???
@anonymou-mj4jc
5 ай бұрын
@@madisoglrobotics I am guessing PTO. Also our drivetrain is 3:2 but it struggles to turn, how does your 2:1 gear ratio have enough torque for that? Our drive has low friction, and our robots not even that heavy.
@madisoglrobotics
5 ай бұрын
@@anonymou-mj4jc ours is 2:1 and our 3:2 doesn’t work. However, try metal shafts they make a use difference
@anonymou-mj4jc
5 ай бұрын
@@madisoglrobotics we use metal shafts. Maybe it is a motor problem, because I am not sure our robot is that heavy
How is the turning so good even though your drive is 2:1 and the bot seems so heavy?
@Samuel_Cheng
5 ай бұрын
the robot is pretty light compared to other teams
Samuel how do you make it that your intake doesn’t jam
@aasrobotics9198
5 ай бұрын
It's possible. My team(95133B) has an intake that can not jam.
@Samuel_Cheng
5 ай бұрын
our intake isn't that smooth
@swiftgamer9094
5 ай бұрын
@@aasrobotics9198 magimid
@ragergamers
4 ай бұрын
@@aasrobotics9198 that’s bc ur magikid
R u gonna post tournament recap?
@aHubzzz
5 ай бұрын
Nope he lost
@aHubzzz
5 ай бұрын
He got 3rd in finals
@Samuel_Cheng
5 ай бұрын
maybe
@badhrigamez8335
5 ай бұрын
@@aHubzzz Ik he didn't win finals, but he still had some really good scores.
@MADDY-94927H
3 ай бұрын
wdym 3rd isnt losing, or is it?
239 xalm; olur a kisi
Capped pins aren’t beating this
Hehe i beat your teamwork and driving skills.. still 10 points off from beating your auto and 150 average 😢 Great job!
@niyin4593
5 ай бұрын
shut up ur mom built ur robot
@Ultra-nl7mv
2 ай бұрын
bros the rizzler
Nice