66050 - LX Platform Rear Camber Bushings - Specialty Products Company

Автокөліктер мен көлік құралдары

This kit combines our previous four kits into one. Allowing adjustment of rear camber on the Chrysler LX platform cars regardless of model year and the complication that Chrysler used two different bushing sizes over the years.
These "set-at-install" bushings can be clocked to provide up to +/-1.5° of adjustment by replacing the outboard bushings on both upper control arms of all Chrysler LX-based cars regardless of aluminum or steel arm construction. By using the #66025 adapter along with the #40910 bushing press, these bushings can be installed without removing the control arms.
Rear Adjustment Range:
Camber +/-1.5°
Install Time: .6 hr/side
Required: 1 kit per wheel

Пікірлер: 15

  • @andrewhigdon8346
    @andrewhigdon83463 ай бұрын

    Pressing out the old bushings is a matter of luck. My camber link was extremely difficult and took full removal and lots of heat. Like starting to glow red heat. The tension strut, not so much trouble at all.

  • @5hamms510
    @5hamms5102 жыл бұрын

    Excellent Example

  • @raisethebar1818
    @raisethebar18182 жыл бұрын

    1 minute into the video and the latex gloves are torn up and gone lol

  • @nightstarking
    @nightstarking Жыл бұрын

    did not fit rear to small went right through the hole on upper rear why? no answer at fast hemi

  • @SPCAlignment

    @SPCAlignment

    Жыл бұрын

    Please call 1-800-525-6505 and ask for technical assistance. We will try to help with your issue.

  • @saulelizondo7872
    @saulelizondo78728 жыл бұрын

    Will this fix alignment issues when lowered ?

  • @MartinFernandez-lc7gh

    @MartinFernandez-lc7gh

    7 жыл бұрын

    any reply

  • @Brittvanegas

    @Brittvanegas

    4 жыл бұрын

    Yes 4 years later lol

  • @raisethebar1818

    @raisethebar1818

    2 жыл бұрын

    guess im just here to uphold the tradition of one reply every 2 years

  • @jadonseverson5566

    @jadonseverson5566

    4 ай бұрын

    @@raisethebar1818it’s been 2 years over

  • @Whislinhemi

    @Whislinhemi

    4 ай бұрын

    Is it fate that I’m commenting 2 years later?

  • @AMMotorsports
    @AMMotorsports7 жыл бұрын

    3rd kit this month!! wtf Chrysler????

  • @350Zquicksilver

    @350Zquicksilver

    4 жыл бұрын

    I know it's been 3yrs, but did you give up on the SPC camber adjustment kit? Did the bushings tear or rotate out of the desired angle position?

  • @mrnotsonicegaming2356
    @mrnotsonicegaming2356 Жыл бұрын

    bought these, had issues with bushing fitment, their tech and customer service was absolutely no help. Nina was a listening ear but was of zero help. they will bounce you person to person then insist on correspondence through e-mail. just to give you the proverbial finger. wont buy another product and will be purchasing from your competitors from now on.

Келесі