I have heard that doing jobs like that put your bucket at risk of having a permanent smile. You are a braver man than me!

Really good job Tim! Very good at using the hydraulics on the rollback with heel of bucket to pry with!!! Much easier on your machine!! Be safe and God bless you and your family!!!!!

@TractorTimewithTim

7 жыл бұрын

Thanks Ray. Appreciate the comments. God Bless you and yours as well!

That’s awesome I love my tooth bar also amazing how much it helps out . Pulled out a crazy huge cactus with mine and an old stump as your pops says just keep digging tell ya what it works !! Thanks again

Ordered my Toothbar this morning. Amazing stuff. Used my TTWT discount code, thank you!

@TractorTimewithTim

3 жыл бұрын

WooHoo! Congratulations! You’ll love it.

good video-and good advertisment for everything. nice!!

Nice intro! I wish I had video to show you the stump I pulled out with my 1025R. That machine impresses me everyday.

@TractorTimewithTim

8 жыл бұрын

+Vincent Sasso yep. Pretty amazing.

I can't understand why more people don't buy a toothbar. Your video makes a perfect case to their versatility.

@TractorTimewithTim

7 жыл бұрын

Well, it makes sense me. I had no idea how much it would enhance the capability of the tractor. You are right. These videos should illustrate just how powerful they are. ..AND you get a 5% discount with coupon code TTWT @ heavyhitch.com

The loader has a lot of power due to the leverage effect. Good job!

Good to see that you don't have to baby that loader.

That is an awesome & a job well done. Awesome digging. I'm gonnuh have to find your video on how ya'll installed your tooth bar. I have my "Johnny" on order & shoulder be available for pickup at the end of July. I ordered the FILB with 54"mower deck & a set of pallet forks. I would love to purchase a front & rear blade as well when the time comes. Thanks for sharing this video. God bless

Wow that pice was in deep. I'm glad you didn't break anything.

@TractorTimewithTim

7 жыл бұрын

Yes, not really the best tool for the job. However, it shows that you can accomplish the goal even if you don't have the perfect tool.

I love how you aren’t afraid to be rough on the tractor

@TractorTimewithTim

5 жыл бұрын

Rough in certain ways, Patrick. There are some things we are careful about. Never ‘RAM’ something at speed.

@noe626able

4 жыл бұрын

Tractor Time with Tim Hi Tim, I don’t so much have questions with this as I do another Artillian product. I know that you are well aware of their quality. Have you gotten a chance to use the Artillian stump bucket? I know it mounts on the pallet fork frame. I was thinking about buying it, and was just curious if you had any experience with using one? Thank you in advance sir! Justin N.

@TractorTimewithTim

4 жыл бұрын

Yessir. We used it in this episode: Backhoe Thumb, Front Hoe Bucket; Group Project with 3 John Deere 1025Rs & 3046R!

Great job Tim the tooth bar worked great but I think I would of put a chain on it after digging around it just saying not telling you how to do it but johnny got it and good to see he is not too tired after his big tiller job nice job but it sounded like that was all he wounded to do ! 😉 but you did a nice job you and you're family have a safe up coming memorial weekend 🇺🇸🇺🇸🇺🇸 !! curt 🚜. 🚜

That little tractor is a hard working machine and you have removed things I thought you never would get up, but did. I have the 790 and 3032E tractors and have not done half the stuff with them that you do with yours.

@TractorTimewithTim

6 жыл бұрын

Requires determination, but it can get the job done!

well done tim, another great video

@TractorTimewithTim

8 жыл бұрын

Thanks. I'm gonna try to publish more videos this week. I have lots of 'raw video' waiting to be edited. Trying hard to catch up.

@transplant5449

8 жыл бұрын

great looking forward too seeing them Tim

lol good job I knew it had the cement column under the round top pad cause that how I did mine.

jobs like this is why I keep lots of chains with hooks. sometimes it is easier to wrap a chain around the object and lift it straight out of the ground .

Good job Tim. Now you know what I have to do when digging. I'd love a BH but it's not in the cards.

@TractorTimewithTim

8 жыл бұрын

yea, this would have been easier with the backhoe, but it was entirely do-able with the loader, and could have been even easier if I wasn't being so careful to avoid destroying Patrick's yard.

just got my new toy for the greenmachine toothbar from HEAVY HITCH going to try it out going to dig out a base for a new shed soon

wow little Johnny stretched its muscle on this one nice job, love watching your videos keep up the good work Happy Labor Day weekend to ya

Lucky you didnt snap a loader arm with the presssure you put on the loader (even with your teeth.. You should have taken the time to remove soil from around it to find how large and how deep the concrete was. You have to repair the lawn anyways. You would have then been able to get under the lip of the concrete and pull straighter up with less abuse to the loader.

If ye get the forks it would have went out no bother but still a great jab there

Nice job on the intro nice job and great video

@TractorTimewithTim

8 жыл бұрын

thanks for the comment.

@kadincrawford9410

8 жыл бұрын

+Tractor Time with Tim no problem if it is not to much is there any way you could upload a little more if don't worry about keep up the good work

@TractorTimewithTim

8 жыл бұрын

Kadin, are you asking for LONGER videos, or more videos?

@kadincrawford9410

8 жыл бұрын

+Tractor Time with Tim yes or you could do one long video of the whole weeks work if it not to much to ask

@TractorTimewithTim

8 жыл бұрын

Well, I'm doing the best that I can given time constraints. I'm glad to hear that you like them. Hey, just handle it like the TV networks...go back and watch the 're-runs' :-) I re-watched the "cut pallet racking with the miter saw" this week. Forgot how entertaining Katriel was. She did NOT like the sparks!

I'm looking for a toothbar for my 1025 tlb? is this tooth bar worth it? do u like the fact that you dont have to drill into the bucket? would you buy again or choose a different design? is it even worth buying? does it perform that much better to buy one?

@TractorTimewithTim

7 жыл бұрын

+Kristina Laboy toothbar is definitely worth it. Improves digging ability tremendously! I like the Heavy Hitch version. Easy to put on and take off....and very tough!

Probably would have been easier to dig a little with a shovel and pull it straight up with a chain. Good video.

@TractorTimewithTim

6 жыл бұрын

I don't have much 'pull straight up' strength with Johnny.

great way to bend the FEL arms never dig on left or right side always stay in center a great way to bend stuff

Lol. Tearing up a perfect lawn push a piece of concrete around.

Using the forks works much easier when trying to get under concrete. I was able to remove an old sidewalk with mine, not tearing up the yard near as bad.

@TractorTimewithTim

7 жыл бұрын

Yep. Definitely. The point of this video is that you CAN get a task completed WITHOUT forks OR a backhoe. In this case, I didn't have the forks along. I didn't think I would need them on this occasion. Patrick came up with this task on a whim just as we were leaving that evening. Thanks for watching and commenting! Do you have a 1-series? What kind of forks do you have?

@charleskelbley385

7 жыл бұрын

I have a 1025R. Forks are 36 inch long. Bucket is 53 wide, 60d deck. I do enjoy your videos, it gives me ideas on what you can do, and thoughts for Christmas presents!

@stepfour

7 жыл бұрын

Tractor Time with Tim awesome! I love the 1025R... I can't afford one at the moment so I have to live vicariously through you guys... any idea how much the bucket can lift?

@TractorTimewithTim

7 жыл бұрын

probably 800-1000lb off the ground, but not to full height. I have lifted 1145 lbs about a ft off the ground with the forks. ...but the tractor did not appreciate it. So, different questions "how much WILL it lift, and how much SHOULD you lift with it?"

@stepfour

7 жыл бұрын

Tractor Time with Tim lol great, thank you!

How much better would your 2R have been at this job? I find myself needing to dig like this from time to time and don't love my buddies BX Kubota as i feel like it doesn't have enough umph to get the job done.

@TractorTimewithTim

4 жыл бұрын

Well, the 1 series has MUCH more loader umph than the BX! The 2R loader definitely stronger, but it isn’t radically so. I show lift capacities of each in videos.

My only question is how are you going to raise a flag now? Nice video!

There goes his lawn

Nice work, Tim. Was that a grounding rod I saw coming up with the concrete? How much $ do they get for that toothbar?

@TractorTimewithTim

8 жыл бұрын

There are a couple of different sizes. $299 and $329. See details here: heavyhitch.com/store/replacement-parts/toothbar-for-john-deere-front-end-loader/

@kadincrawford9410

8 жыл бұрын

For the base model it is 11k and with what all he has I would about 28k

@TractorTimewithTim

8 жыл бұрын

Doug, I suspect it was now that you mention it. I didn't know what it was! Thanks for answering that question. I heard that this flagpole was originally instaled by a professional crew. Given how secure it was, I can safely say that they did an excellent job. There were a couple of issues. First, they put the 'grade' of the concrete too high (hard to drive over). Second, they put the flagpole too close to the driveway. I wouldn't want a flagpole there, I would back into it with my car.

@DougStevenz

8 жыл бұрын

Not the tractor, just the toothbar on the bucket.

@kadincrawford9410

8 жыл бұрын

+DougStevenz sorry I did not read the rat until it was to late my bad

What was that two way radio device you were using?

@TractorTimewithTim

8 жыл бұрын

+Chris Sullivan Sena Intercom and Microphone.

why couldn't you put a pipe in and then hook a chain to the pipe and leverage it out?

If he'd worked it from 4 sides it would have come out faster, easier. But nice job.

What are you tearing up the asphalt?

@TractorTimewithTim

5 жыл бұрын

??

Where did u get the tooth bar? I just baught a 1025r, but the dealer didn't have any!

@TractorTimewithTim

5 жыл бұрын

Hi Jimmy. Welcome to our channel. Heavyhitch.com. Use coupon code TTWT for a 5% discount.

@jimmyduff1954

5 жыл бұрын

Awesome!!! Thank you so much!!

@jimmyduff1954

5 жыл бұрын

One more question! Where did you get those silver chain hooks on the top of your bucket?

@TractorTimewithTim

5 жыл бұрын

Boltonhooks.com. I don’t have a coupon code for them, but they are inexpensive.

@TractorTimewithTim

5 жыл бұрын

Watch more of our videos...you will see many useful accessories.

That poor lawn lol

@tjfarragher9053

6 жыл бұрын

I don't know why they didn't use a crow bar I would have had it out with the lawn perfect

Oh, forgive me, at 3:56 I got my answer!

For the love of Menards, drive forward!

@TractorTimewithTim

8 жыл бұрын

Yea, seems obvious now, doesn't it? Oh well. I had to keep you in suspense.

@mndak76

8 жыл бұрын

+Tractor Time with Tim Like your channel very much. Keep up the good work. “Critics are our friends, they show us our faults.” ― Benjamin Franklin

@TractorTimewithTim

8 жыл бұрын

+mndak76 I am still chuckling at your exclamation ..."for the love of Menards!" Thanks for giving me a laugh. subscribers like you make it worthwhile to make these videos.

Nice job that looked annoying

That toothbar is really tough... takes a lot of abuse.

@TractorTimewithTim

4 жыл бұрын

That was 4 years ago. I’ve still yet to even ‘ding’ it!

That poor mans yard look how nice it is. If you actually had a tractor instead of a glorified mower you would of had that thing out in no time. 😂

That was so cocky

@joemckeon3570

7 жыл бұрын

That was so cool. Tim

Biggest mushroom I've ever seen

@TractorTimewithTim

8 жыл бұрын

Ha! ..and I raised it out of there so fast that it looked like an atom bomb, right? (...mushroom cloud...) Oh well, I tried!

Try a compact hydraulic excavator