64.The Bench
Тәжірибелік нұсқаулар және стиль
Your most important tool: its height, surface, vises, dogs, and holdfasts.
_________________________________________________________________________
Visit: www.blackburnbooks.com to view books. To order, call 845-430-3417 or email:gbmunc@gmail.com.
To enquire about, and sign up for, individual and small group lessons in Woodstock NY call 845-430-3417 or email gbmunc@gmail.com.
Пікірлер: 106
Oh this video is perfect timing . I'm in the process of trying to draw up plans for my permanent bench . You've given me plenty of things to consider sir . So glad you've started another series of shows as I thoroughly enjoy them . Thank you Mister Blackburn and blessings to you .
@gjbmunc
3 ай бұрын
Glad it was helpful!
Missed your content - glad to see it back!
@gjbmunc
3 ай бұрын
Hey, thanks!
Thanks for another enjoyable video. Great tips, and LOVE the intro music. I always turn up my Hi-Fi.
@gjbmunc
6 күн бұрын
Glad you like them!
It's great to see you back, Graham! Thanks for another lesson! 😃 Stay safe there with your family! 🖖😊
@gjbmunc
3 ай бұрын
My pleasure!
Greetings from Mexico, you are a teacher for me where I am always learning from your videos
@gjbmunc
3 ай бұрын
Thanks so much!
Really enjoyed this video. Great job.
@gjbmunc
2 ай бұрын
Glad you enjoyed it!
Thanks for this information, very helpful. 🇦🇺👴🏻
@gjbmunc
3 ай бұрын
My pleasure!
So glad to see you're back, I hope you had some nice holidays! Thanks for your videos, I look forward to more.
@gjbmunc
3 ай бұрын
Thanks so much!
Thanks for all you do sir.
@gjbmunc
3 ай бұрын
My pleasure!
Thank you for the great content Graham!!
@gjbmunc
3 ай бұрын
My pleasure!
A great overview, sir. I've owned your book for several years now and agree that it's a valuable resource. Thank you for sharing.
@gjbmunc
3 ай бұрын
Glad it was helpful!
Thank you for putting so much detain into these about you are doing and why your do it that way.
@gjbmunc
3 ай бұрын
Thanks so much!
That was a wonderful video. Thank you very much.:)
@gjbmunc
2 ай бұрын
Glad you enjoyed it!
Terrific video, Graham. Most of it I know and do but you had a few tips that were new to me. Much thanks.
@gjbmunc
3 ай бұрын
Glad it was helpful!
Thanks Graham, great information and I bought the book:)
@gjbmunc
3 ай бұрын
Hope you enjoy it!
@danielgeng2306
3 ай бұрын
@@gjbmunc I have no doubt I will sir!
Nicely done.
@gjbmunc
3 ай бұрын
Thanks!
Great stuff
@gjbmunc
2 ай бұрын
Thanks!
So happy that you are back. Yes how high the bench is very important to the user and I think you explained the best way to find it. Oh, and HI from jackson, TN.
@gjbmunc
3 ай бұрын
Thanks, and hi!
I thoroughly enjoy your videos. I need to build a work bench. I've always worked on makeshift benches. Saw horses or folding plastic tables.
@gjbmunc
3 ай бұрын
Cool, thanks. Go for it.
Happy New Year. I have a viceless bench and find I don't miss them much at all. That said I do have a bench mule and various clamping jigs. Nice share.
@gjbmunc
3 ай бұрын
Happy new year to you too!
Another great video 😄😄
@gjbmunc
3 ай бұрын
Thanks again!
Reading through that book now. All very interesting. Somewhat new to this and learning. Thanks.
@gjbmunc
3 ай бұрын
Thanks so much!
Thank you Sir
@gjbmunc
3 ай бұрын
Most welcome
Useful features on a bench. You could also make do with a simple bench hook and planing stop.
@gjbmunc
3 ай бұрын
Of course, if 'making do' is all you're interested in!
well done graham! i also use a very small vise from ulmia (no longer on the market but there are many copies) to hold smaller workpieces. it fits perfectly in both tail and face vices. keep up the good work!
@gjbmunc
2 ай бұрын
I'll do an episode on side snipes and snipe bills - they're in the same family but not quite the same as side rabbets.
I am looking forward to your take on work holding methods. I do like simple hold fasts because they are a very fast way to work.
@gjbmunc
3 ай бұрын
Coming soon!
I'm reading that book right now. It's just great!
@gjbmunc
3 ай бұрын
Thanks!
Great video as always, Graham! And to those who haven't read it yet, I can highly recommend the book!
@gjbmunc
3 ай бұрын
Thanks for that!
Again,thank you
@gjbmunc
3 ай бұрын
Thanks so much!
Thanks to video! Greetings from Finland! ❄️☃️🎅🏻👍🏻🇫🇮
@gjbmunc
3 ай бұрын
Thank you too!
A machinist's straight edge is a bit of a luxury item. You can make a wooden straight edge, straight to the thickness of the finest shaving you can take, by jointing three edges on separate boards tightly together until there is no light showing through the seam anywhere.
@gjbmunc
3 ай бұрын
The machinist's straight edge may indeed be a bit of a luxury item if all you use it for is levelling the bench....
Good afternoon from Copperhill Tn.
@gjbmunc
3 ай бұрын
Hello there!
Gonna look forward to this series love watching I’ll school craftsman do their magic just admire the skill and dedication Could I be a cheeky chap and ask how big is your workshop
@gjbmunc
3 ай бұрын
Never big enough - roughly 20 x 20.
@jackofalltradesmasterofnon8069
3 ай бұрын
@@gjbmunc a fair old size better than my 3 foot by 5 foot shed/cell I am going to buy a shed just for my woodworking shenanigans lol just seeing what best size to get
Bench height is a subject of endless discussion, but at the end of the day it’s personal preference and what works best for the individual woodworker. You mentioned your tail vice for work holding. I have to say I am not a great fan of them and have used a holdfast and ‘doe’s foot’ batten successfully for many years. Perhaps you could do a video on making and using one.
@gjbmunc
3 ай бұрын
Well said! Doe's foot can be very useful.
Your tail vise is on the struggle bus! Wood-on-wood in the humid winter, eh?
@gjbmunc
3 ай бұрын
Exactly!
@Trapper_Creek_2024
3 ай бұрын
@@gjbmunc It’ll get better soon, and then summer heat and humidity will sink in 🤦🏻We can’t get away from it, can we??
Your videos are great. This video describes mostly vises. Can you please make comments on Wedge Holding methods too? Thank you..
@gjbmunc
3 ай бұрын
Sure I will
Huh... never thought of using a holdfast from a block of wood in one of the vises. Might have to give that a try!🤔
@gjbmunc
3 ай бұрын
Good luck!
@memilanuk
3 ай бұрын
@@gjbmunc no concerns about hammering on the hold fast & block while in the vise? Seems like I've usually seen it advised to avoid that in, at least in general terms.
A Stanley Fatmax spirit level (or equivalent) makes an adequate straight edge. Additionally the aluminium will leave marks on wood; so if I’m flattening boards or jointing edges I simply rub the level against the wood and the resulting grey/black marks indicate the high spots.
@gjbmunc
3 ай бұрын
Good idea!
Could do with some wax on that tail vice
@gjbmunc
3 ай бұрын
It's the humidity this winter in New York.
I am surprised that you did not talk about the bench till…
@gjbmunc
3 ай бұрын
Ah yes, the tool well - together with its cleanout ramp! Never enough tme to mention everything. Thanks anyway!
Question: bench height is obviously also a personal preference, but what would you say about fellow woodworker Paul Sellers's suggestion of getting a 38" high bench, for a 5'10" person? It's a fair bit higher than your suggestion. (I have two benches btw, a Swiss Ulmia equivalent like yours that's fairly low, and a diy English style bench that's a bit higher. I can only use the latter right now, but I like them both for different things. One is better for planing, the other is better fir joinery.)
@gjbmunc
3 ай бұрын
Two benches sounds great. I respect Paul greatly, but we learnt in slightly different parts of England!
Perfect. What wood did you use?
@richarde7432
3 ай бұрын
My bench is made from 2 x4 construction lumber. It works fine. Any wood will last a lifetime for a bench.
@gjbmunc
3 ай бұрын
The bech is primarily hard Scandinavian maple.
@gjbmunc
3 ай бұрын
O course, it's just that hardwood lasts longer and is less
@richarde7432
3 ай бұрын
@@gjbmunc No doubt that hardwood makes a nice bench.
How/why would you use a holdfast to secure a piece of wood to plane it with a shooting board?
@gjbmunc
2 ай бұрын
Depends where you position the shooting board and how big the workpiece...
@joegiotta7580
2 ай бұрын
@@gjbmuncI’m confused. The way you showed it in the video the plane wouldn’t be able to shoot the board. The holdfast would be in the way. Can you clear that up?
@joegiotta7580
2 ай бұрын
No answer?@@gjbmunc
My most important tool is ny working bench. I built an English joinery bench. All made of pine. Because i am using dog hols it is very "flexible bench" . first I use a crochet and hold fast to hold long boards to the apron of the bench and later i built a leg vise.
@gjbmunc
3 ай бұрын
Sounds good!
Its obvious Graham is not using tail vise all that much 😊
@gjbmunc
3 ай бұрын
Tail vise swelled up because of all the rain around here.
These rules like the “flat hand” rule or the knuckle rule don’t work for me at all: a bench that low gives me back pain within minutes. I find a higher bench a lot more convenient and ergonomic: a good 4 inches above the wrist or so. A good way to put this to the test is to plane two pieces of wood that are different in height: see which is more convenient. Some people argue that a bench for planing should be relatively low in order to be able to push down on the workpiece, but you hardly need any force pushing down when planing; I can see where the idea is coming from, but it’s just not true - unless your plane iron is completely dull and you’re practically biting chunks out of the wood. I don’t seem to be the only one: Paul Sellers claims that most of his students are happier with a taller workbench. Just fyi. So at the very least I would say that everybody needs to figure out the best height for themself, and I really don’t think people should be scared of going against those rules of thumb.
@gjbmunc
3 ай бұрын
Of course, we're all different, I'm just trying to give some rational guidelines.
What's up at 8:27?
@gjbmunc
3 ай бұрын
Example of using holdfast.
I realize that you were not actually checking the flatness of the bench, but the subscribers should see you using the correct edge of the straight edge. The edge with the bevel (chamfer) on it is the straight edge that you should be using.
@gjbmunc
3 ай бұрын
Of course, but I was hoping the label on the straightedge would be readable.