As of December 2019, RockAuto has the GE LED 6054 (same headlight as the Trucklight) for under $112.00 each. Thinking about buying them for my 2005 F350.

Great comparison demonstration! Should take these outside in total darkness to see the actual effects.

@HeadlightRevolution

6 жыл бұрын

Thanks for watching! The room we tested in was as close to total darkness as you can get, we like to test indoors in a stable environment so we can test the lux and observe the beam pattern.

@alwcurlz

6 жыл бұрын

The beam pattern on the wall though won't necessarily represent what some of us want to see. I'm interested to see what the illumination pattern is like at 100ft and sides.

@HeadlightRevolution

6 жыл бұрын

Thanks for the input, we will take it into consideration.

This is a great comparison for the models. However...I would have liked to have seen some outside beam shots. All at the same height. You really cant tell much about a lights beam pattern up against a wall. Thats only good for aiming. Because based on this, the Chinese unit sure as heck looked pretty good. Sure it looked focused on the wall, but 2' off the ground, that bright spot is going to spread. I was on the Trucklite bandwagon for a bit, but they are kind of disappointing compared to others. Im all for USA made products. But for the price, the Chinese model is pretty attractive.

@rodwellcort7503

7 жыл бұрын

My sentiments exactly...

Following up. I ordered a pair of the JW Speaker headlights based on this video and I am well satisfied. The JWS pieces are first-class quality and the light output/scatter is dramatically better than the stock halogen units on my Jeep YJ Wrangler. Thanks for this video.

@skylinegtr65

4 жыл бұрын

Jw speaker imo are the best 5x7 led headlights. Specially the ones with the heater

Hello Headlight Revolution team. Would it be possible to do a short video for us classic car guys with the 7 inch sealed beams. Would love to know your suggestions for what LED headlights to put in maybe a Autopal or Hella 7 inch semi-sealed H4 housing ? We are mostly concerned with keeping the stock look of the glass housing but need better illumination and hopefully with sharp lines maybe a "CSP" type LED bulb ? Thank you !!!

It's gonna be interesting trying to pick something like these for my jeep Cherokee

Am still a hardcore lover of old retro stock head lights😍

@HeadlightRevolution

2 жыл бұрын

🤘

This is a great video that has helped me very much. I've been considering upgrading the headlights on my '95 Jeep Wrangler. There's so much stuff out there that making an informed decision is difficult. I've seen all the led conversion bulbs that are used inside a halogen reflector etc and I've tried those with other vehicles. Anyway, thanks to this video, I have now ordered the JW Speaker 5X7's. They seem to be the best. You get what you pay for. Price for the JWS units are now down to a little over $200 each now. I'll try to post my results later. Thanks for the time and effort making this video.

@rigobertoeudave

2 жыл бұрын

How are the JW's been working ?

From my understanding: DOT does not approve headlights. DOT sets standards that the manufacturers self-certify that their products meet. We all know people and businesses sometimes lie.

@kenabi

4 жыл бұрын

DOT just sets regulations. SAE just sets standards. neither agency approves anything in product form. and given how rampant false claims are, these things on the products or packaging are effectively meaningless.

@Terk131

4 жыл бұрын

@@kenabi very true. Just like helmets.

Awesome comparison and loving the Skrillex in the background

@HeadlightRevolution

4 жыл бұрын

Thanks for watching!

I don't understand the fitment issue with the wires out the rear doesn't make any sense to me. The bulbs that these replace have the 3 prong plugs right there anyhow, and most housings I've seen, this area is open. The 8900 with the wire off the side looks like the pigtail would be nearly too short to connect to the vehicle's plug.

Yes the arc above the line, which cut-offs do not have, is very good for signs on the road. My second biggest peeve with cut-offs is the lack of seeing signs clearly at a distance. My first of course is it looks like someone is flashing their high beams to oncoming traffic every little bump in the road.

@HeadlightRevolution

4 жыл бұрын

That is a very good point. Some of those factory projectors are aimed pretty high from the factory too!

@mikafoxx2717

Жыл бұрын

@@HeadlightRevolution I think one problem is that really tall vehicles don't aim lower than low cars, so they get blinded much easier if you're a lot lower as well.

Very interesting. I am looking at upgrading the sealed beams on my MR2 some time, though for $300 apiece, I may need to save up a bit before I can buy something worth my money.

@rushnerd

2 жыл бұрын

You ever find some? I could use some with a nice beam pattern for my MK3 Supra.

The hotspot can be seen on the road and especially in fog with the trucklite, in both low and high beam . Kinda annoying. After several years and hundreds of thousands of miles they still work but get moisture and a bit of rust inside. Installed on a kenworth t300. Year 2001

can anyone help me understand, i dont get what the 5x7- 7x6 difference is and what they both mean?? are they different sizes??

Also for off road use, on a off road farm vehicle, where you will not blind someone and being legal is not an issue, is there an insanely super bright LED 5X7 stock replacement without adding a light bar???? One truck has halogen cibbe 5x7 housing with 100/130 watt halogen bulbs

Thanks so much - this was super helpful!

How are they in cold weather/winter? Im really digging the truck lite, nice and clean and the most similar to OEM in my opinion, but i live in chicago and winters here can be harsh. I need something good for winter.

The trucklites are really awesome for semis. I prefer them over grote and United Pacific's lights. The problem with UP is that it doesn't light up close to the truck. I like the trucklites much more because they do.

@HeadlightRevolution

4 жыл бұрын

I ran a pair of Trucklite 5x7s on a project of mine and loved them. -Chris W

Im without a ton of money but willing to spend $30 more for the United pacific headlight. Which do you think is better for my 1990 wrangler yj? I’m thinking the U.P but outside opinions would be great!

@ headlightrevolution ... I have a 2000 Chevy C2500 W/T. What would you recommend for led headlights? The sealed beams dont throw enough light. Trying to improve my safety while driving at night.

Why is there a "blue hot spot" in the middle? It seems the Evolution 2 series has those, while the Evolution (older one) didn't have those horrible hot spots . I checked all youtube videos, and it seems the EVolution 2 has a wider beam, but the Evolution (older one) has better and smoother distribution. I can't stand the trucklites for the very same reason( lots of shadows), Is the bad shadowing and hot spots present in al EVO 2? Thanks in advance

This was SO damn educational! Been looking for a while now for the perfect headlight upgrade for my Jeep Cherokee XJ. However upon going to your website, there are no options for the XJ! What gives? Excellent video though. Learned quite a bit.

@HeadlightRevolution

7 жыл бұрын

haha, we're working on that! Just go to the Sealed Beam 5x7 section of the website, and all of those housings will fit your XJ: www.headlightrevolution.com/products/sealed-beam/5x7-rectangle-headlights

@jonnyracerx

6 жыл бұрын

Cherokee (XJ) jeeps use the standard 5x7 (5 1/2"x 7 1/2") rectangle (high&low beam) that most cars of that era used just pic anything Large rectangle from 1985 - 2000 (not small rectangle 4x6 (4,1/2 x 6,1/2)). there were only 2 types large/ small (small had separate high beams, so 2 1/2 types).

So which one will be suitable for 2000 Chevy pickup truck 2 wheel drive C3500 ?

@HeadlightRevolution

2 жыл бұрын

Shoot us an email so we can assist you! 218-755-5200 Sales@HeadlightRevolution.com

Thank you for info on these lights. United Pacific light looks great. What is the model number for the 7x6 version?

@HeadlightRevolution

8 жыл бұрын

You're welcome! That is the United Pacific Part Number 31297. All the info is here: www.headlightrevolution.com/product/united-pacific-31297-5x7-5-led-highlow-crystal-headlight

For as professional and technical as you sound I would expect you to be able to use a simple multi-meter and test the AMPERAGE draw, not only on the Chinese No-Brand, but also the others - to confirm/ check the accuracy of company statements. You can get pretty cheap DMMs, Harbor-freight even gives out Free ones every 2-3 months (w/any purchase) if you check the ads . thanks for the comparison :-D

Does he ever show the lights powered up ? Ill just sit here and listen for a while 🎶🎶🎶 Okay he did. I like the beam of the trucklite. Thank you for posting.

@HeadlightRevolution

3 жыл бұрын

You just have to watch the full video, starting at 18:38 he starts testing all of those lights!

The poly-carbonate lens is the worst thing that ever happened to headlights. Can't we just use glass? ..... I will pay extra.

@thomaspayne6866

6 жыл бұрын

grantlandneil AMEN.

@Mumbles19852007

6 жыл бұрын

I agree. Glass lenses are much more durable than poly.

@jamesmccarthy942

5 жыл бұрын

I had to return a pair of Speaker Gen 2's(Jeep 2018 JK) because the inside lens developed a weird cloud ;almost crystal looking in front of all four projectors and those coin shape side lights. 4Wheel Parts swapped them out/installed them yesterday,no charge, for the more expensive for the latest Gen 3 Evo's yesterday.I live in New Mexico where there is no moisture.

@cobrafied

5 жыл бұрын

You guys obviously havent owned a pair of chinese glass headlights. They are thinner than the original OEM 5x7 . If you've ever had a dim headlight because of a rock chip hole you can expect it to happen much faster in the thinner chinese glass. I've had both, the glass ones didnt last a year before a rock made a hole. I make 5x7 retrofits in both but don't recommend glass

@jgizzy

4 жыл бұрын

@@cobrafied You set up a classic strawman fallacy against the 'pro-glass' argument by using the worst possible example of a glass lens. To be clear: they want a QUALITY glass lens, of course -- not some lowest version Chinese glass.

Do you have kits for 1986 GMC Jimmy Sierra C/K 1500?

On the JW, you say that when you turn on the high beam the low beam turns off, and showed us, but when reflecting the JW on the wall we can see the high turn on but the low doesnt seem to turn off, it stays the same... What is happening?

@HeadlightRevolution

6 жыл бұрын

He must have misspoke when he said the low beam turns off. There are some lights form Speaker where the low beam turns off, but this is not one of those. Thanks for your comment!

Do these LED headlights have issues of snow accumulations on the lense during winter? I'm considering spending the extra money for Trucklite or the United Pacific lights, but am worried about this issue as I do a lot of winter driving. Do you know if these lights produce enough heat to prevent snow accumulation?

@raoulchartier1527

3 жыл бұрын

They don't make heat truck lite that I use ice up they make a new one with heater

for a motorcycle with a single 5x7, what's your best recommendation? Non-Chinese,

@momurderah

5 жыл бұрын

Get a inexpensive 5x7 housing, glass preferably, and retrofit a single HID projector. It's not too difficult to do and projectors have amazing light output for way less than the $300 for the "best" one of these headlights.

Thanks for a such great comparison!

for nissan d21 wich??

so what do i do if my car has 4 headlights on the front... 2 for low beam and 2 for high?

@HeadlightRevolution

9 жыл бұрын

Aaron Ries If your car has four rectangular headlights they are probably 4x6" headlights and are not 5x7". If you would like to take a look at 4x6" LED headlights we have some here: www.headlightrevolution.com/4x6_Rectangle_LED_Headlights_s/1899.htm

Chris You are awsome looking forward to buying 1 of those lights very soon.

@HeadlightRevolution

6 жыл бұрын

Alejandro, YOU ARE AWESOME! If you have any questions about these please let us know. You can find more headlights here: headlightrevolution.com/headlights/replacement-headlight-housings/sealed-beam-headlight-upgrades/5x7-rectangular-sealed-beam-headlight-housings/

Is there a way to get all three projectors to come one for the high beam of the JWSpeaker Evo? I've also seen that the EVO 2 performs the same... Are these the Evo 2s or the 1st gen?

@HeadlightRevolution

8 жыл бұрын

+Philip Gragg Sorry, there is no way to make the high and low beam function come on at the same time on any JW Speaker light. JW Speaker has specifically designed there lights not to operate this way to stay within DOT standards. Especially on the Evo 2 there is no way to make the High and Low come on at the same time. If you've seen a JW Speaker looking light operating this way it was either a knock of or it was modified to do so. If you want a light where the high and low can come on at the same time, take a look at the Vision X Vortex LED headlight. Vision X will soon be coming out with a 5X7 LED headlight like that Vortex Headlight that can use the High-Four adapter to run the high and low beam at the same time.

@PhilipGragg

8 жыл бұрын

+Headlight Revolution thanks for the thorough reply! I'll keep an eye out!

Great choice in music. Skrillex breakin a sweat

I thought i was hearing things trying to figure out if there was music playing in the background

@HeadlightRevolution

2 жыл бұрын

😂

Awesome video! I have a jeep jk and I have a question about aftermarket foglight options. I saw the video you made, and clearly the JWS 6145 were the best. I have heard of people using Rigid's duallies as their fog lights with the adapter kit that you guys sell. I was wondering if you would suggest that or JWS's 6145 since their about the same price. Also if I use duallies will I have a problem with flickering and finally will it be a hassle to have them triggered by my factory fog light switch. And yes I know the duallies aren't street legal. thanks!

@HeadlightRevolution

9 жыл бұрын

Kennedy A Thanks Kennedy A! Any time you replace the fog lights on a newer Jeep JK with LED's you are going to run into a flickering issue, no matter what brand you use. That is why we offer the fog light anti-flicker harness. You can use the Rigid Dually's with our adapter set, that will work, but the JW Speaker 6145's are going to be brighter, and the kit already comes with the adapters that you need. and the brackets if you need them for the metal X bumper. Also, if you plug the aftermarket fog lights into the factory fog light harness with the proper anti-flicker adapters it should work just fine. So in conculsion, the Rigid Dually's are a good option but the 6145's are what I would recommend for you. Let me know if you need any further help, thanks!

@LESPAUL44mag

9 жыл бұрын

Headlight Revolution Thanks!! I'm just a bit confused on why you're saying that the JWS 6145's will be brighter because they're about 1,000 raw lumens whereas the dually d2s are about 3,000. I would get the JWS but it seems to me that the rigid are theoretically 3x as bright. Please explain. thanks!

@735337707

9 жыл бұрын

Kennedy A Lumens are not perfect to measure light. Read more: www.ledlightingexplained.com/led-lighting-myths/

@HeadlightRevolution

9 жыл бұрын

Kennedy A Those do seem pretty bright, and those are always a option for you. The reason that I say that the JW's are brighter is from our testing that we have done here in house. JW Speaker is the best in the industry. You can't really trust the Lumen numbers that company's slap onto their products, that is just a theoretical light output number. You still have to account for the optics, the hardware, and the thermal management that has been engineered into these products. If you watch a few of our videos, Chris does a great job explaining this. He talks about this in a few videos like this one: kzread.info/dash/bejne/nZyNqLuQfsyzkbA.html We have seen Chinese lights that have a way higher lumen number on the box, then you compare them to the JW Speaker product that they tried to copy that has a realistic/correct/lower lumen number on them, and sure enough the JW Speaker light is way brighter. We have seen this many, many times! And the lumens aren't the only thing that you want to go by when you are researching lights either, the true light comparisons that should be compared are the Lux and Candela. The lumens are usually just an exaggerated number, of how much light the LED is supposed to put out. The Lux is the actual measurement of the light at a certain distance, and the candela is the whole measurement of the beam pattern at each distance as far as the light reaches depending on what housing the light is in. Let me know if you need any further assistance? Thanks

Any new LED rectangular headlights for 2020 since this is a 5 year old video.

@HeadlightRevolution

4 жыл бұрын

We have had updates on products from the manufacturers, but we are still using the same brands on the website! I have linked all of those rectangular housings here: headlightrevolution.com/headlights/replacement-headlight-housings/sealed-beam-headlight-upgrades/

Are the United pacific headlights sold as a pair??

@HeadlightRevolution

8 жыл бұрын

The United Pacific lights are sold individually.

Really confusing. My headlights measure 5x7. Yet most advertise a 7x6 for my vehicle. I don’t get it.

@HeadlightRevolution

3 жыл бұрын

Shoot us an email at Sales@headlightrevolution.com and we can assist you.

@rolandthethompsongunner64

3 жыл бұрын

@@HeadlightRevolution Actually bought a set they work great. Although I haven’t been able to hookup the DRLS. Can’t find anything switched under the hood that’s 10 amps. Guess I’ll have to go into the fuse box in the cab. Some people find my new lights to bright and flash me. Oh well guess they see me now

What are the brightest 7x6 headlight i can buy?

@HeadlightRevolution

7 жыл бұрын

It would probably be brightest to install a GTR Lighting projector housing and put a 55w HID bulb in. That would be the brightest. But if you want something that's still really bright and really easy to install I'd go with the Speaker 8900. headlightrevolution.com/search.php?search_query=speaker+8900&Search= If you want to go with the HID's shoot us an email and we can get you set up. sales@headlightrevolution.com

@GoTourNZ

7 жыл бұрын

Slight modification to the above poster's question. What's the brightest/best pattern headlight I can buy in 5 x 7? (For motorcycle use) Many thanks..

Thank you very much

@HeadlightRevolution

3 жыл бұрын

Not a problem, glad that you found this video helpful! Let us know if there is anything we can do for you, we are here to help! Thank you and have a great day!

does this fits 1969 vw? thank you

@HeadlightRevolution

6 жыл бұрын

Hey there, what's the model of your VW?

are these lamps DOT legal?

@HeadlightRevolution

6 жыл бұрын

Orson, in the video we talk about which ones are and which are not. On our website there are more options now and they'll tell you if they're legal or not: headlightrevolution.com/headlights/replacement-headlight-housings/sealed-beam-headlight-upgrades/5x7-rectangular-sealed-beam-headlight-housings/

do you hid for 2000 silverado

@HeadlightRevolution

8 жыл бұрын

We do. The 2000 Silverado takes a 9006 style bulb for the low beams and a 9005 style bulb for the high beams. We have HID kits for those. If you'd like further assistance, try contacting us at sales@headlightrevolution.com and we can get you any specifics.

Any news on JWS 8630 Evo?

@HeadlightRevolution

9 жыл бұрын

®735337707™ No sorry, we haven't head anything yet from JW Speaker about an updated 8630. It was a bummer that it didn't make the list to be updated with the 8700, 8000, and 8900's. We're thinking it was because the 8630 lights are less common.

@735337707

9 жыл бұрын

Headlight Revolution We have them in Europe now: www.mobilecentre.co.uk/index.php?main_page=product_info&cPath=70_253&products_id=936 Any chance of you testing them?

Would like to offer you lights if you want .

How to buy in myanmar

@HeadlightRevolution

4 жыл бұрын

It depends on which specific one you'd like to go with, but we can ship to Myanmar no problem! The easiest way to find out the shipping costs is to add the items to your cart and start the checkout process. Once you enter in your shipping info, it will show you all of the shipping options and the prices.

You really should do these test outside in the dark with some distance

Buenos días, debería exportar para Colombia!!!

@HeadlightRevolution

7 жыл бұрын

¡Podemos enviar a Colombia!

@hiloagricolagerempaca7814

7 жыл бұрын

Que bueno, hay alguna almacén en Colombia donde las podamos conseguir, o como seria el envío?

The tech for LEDs as vehicular applications is still not solid. For a replacement lamp housing 4-5 LEDs the draw is too much. A power supply at 12v can easily push qt 60 5500 white LEDs drawing only 1.6 amps. This tells me these lights are way underpowered causing the power supply to fail rather quickly. This is only postponed with heatsinks and fans. LEDs are water resistant them selves, the components are not. Housing the components in a sealed structure will cause them to overheat. A weep hole is necessary for venting and condensation removal, this once again making the components prone to water damage. Maybe wait another year or two before spending 300.00 for one lamp. Just my opinion in the field of lighting.

@HeadlightRevolution

4 жыл бұрын

There have been massive improvements in LED lighting since this video was created. You should check out some of our recent stuff!

FWIW: Lumens, pattern on a wall, it all means nothing. You NEED to see both low beam and high beam on a street with markers on the sides to indicate how far the light goes down the road. Without that, you still don't know what you're getting until you mount it all. 'Totally insane' doesn't help me know what the headlight actually lights up down the road.

I hear "Breaking A Sweat" by Skrillex in the background lol.

how much cost$

@HeadlightRevolution

8 жыл бұрын

+Jose Trinidad Granados Each one has a different price. Up above we have a few links that will take you to all the different products and you can get the prices on the specific ones you're looking for.

@josetrinidadgranados6623

8 жыл бұрын

Thanks

the 8900 are now 100$ in 2018 :D

@HeadlightRevolution

6 жыл бұрын

racedezign336, check again. That's probably not a pair.

*Some people want to see what they look like on the road. Understand that the wall shots are perfect to look at if you have experience in head light beams and understand directing light arrays, refraction and prism anomalies of different manufacturing patents. First make sure your car is at 90 degrees to the wall from rear bumper to front. Live Road shots have too many variables of what the background can be like and degrees of surface material reflectance - this leads to a average blank slate, another words it could be anything. We are concentrating on beams of light, not the many different lays of the land. So if you drive from west Texas which is almost all desert and you get into east Texas which is quite GREEN with foilage of bushes and trees, or that of populated areas with only housing, or say winter arrives and its mostly snow on the ground - are you going to swap out your head lights at the nearest AUTOZONE? Nope ! So, concentrate on the light beam on the wall only when looking at head lights. Dont blind the on coming driver. Keep the low beams 95% to the right of the crown road center line and at the crest line and below , Keep the high beams corresponding with the low in a way that they go 1/3 to 1/2 over the crest of the road above the horizon mark*

Please take them outside in real world conditions.👍🏼👍🏼

@HeadlightRevolution

5 жыл бұрын

They do great outside!

Pardon me. ...A Toyota Tundra...

It seems like your review is bias towards the Chinese brand

@HeadlightRevolution

5 жыл бұрын

We try not to be biased but instead show the facts on each light and make our decision from there.

Lol budget 😂😂😂

@HeadlightRevolution

4 жыл бұрын

You know what we mean!

Chris, you do an excellent job in all of these videos. But you seem really biased against any products made in China, and J.W.Speaker can do no wrong?!? For instance, why do you keep referring to every generic light in all of HR videos as "the cheap Chinese knock-off", instead of just saying "the generic brand". Okay, yes!!! The generic brand is not as good, but we are all aware that you get what you pay for. It's insulting and disrespectful to those who only have $100 to spend on a pair of LED headlights, rather than having to pay 6x as much - and I don't think J.W.Speaker is 6x as good. Chris, I'm just asking for you to be a bit more fair and unbiased. For goodness sake, you have a Toyota Tacoma as your test truck.

@HeadlightRevolution

7 жыл бұрын

Hi Rodwell, yes we are biased because we appreciate high quality items, made in the USA, that require some ingenuity to bring to market. JW Speaker designed the style of light and optic that all the "cheap Chinese knock-offs" use. We call them that because they bought a JW Speaker light, re-engineered it, and made it in the least expensive way possible. It's not a figure of speech, it's quite literal. They are cheap, they are Chinese made, and they are a knock-off of a JW Speaker light. The reason we call them generic is because all these companies that sell them get them from the same manufacturers! Companies like Oracle Lighting, Genssi,, Nightsun, and a thousand other companies all take the same catalog from China, slap their brand on it and claim it's new and improved... blah blah blah, yada yada yada... the reality is they all are selling something designed on the backs of the American workers at JW Speaker in Wisconsin! We can respect a product from China that is a unique design, but when someone just steals someone else's idea, then makes it cheaper, there's no tolerance for that. Furthermore, where would all these knock-off headlights be if JW Speaker didn't spend millions of dollars inventing the technology in the first place? It's not OK to support thieves at the expense of creators. I think the more we embrace the knock-offs, the more market share we take away from the originals, and the worse off our own automotive aftermarket will be in the future. I mean, by buying the knock-off headlight you're literally removing incentive from JW Speaker to make a new product. If some guy in China is just going to copy it in 4 months, why spend all the time making something new?? You know? I understand that you can buy 3 or 4 of the cheap ones for each JW Speaker product, but at what cost to your country, the automotive aftermarket, and the quality of your own project build? I prefer to know that I've got the real deal on my vehicle, made by American workers, and the performance, beam pattern and light output is the best in the world. Also, a new Toyota Tundra costs $40-$60,000. It's not like it's some piece of junk vehicle that you should feel bad about investing money into, even as an import... Thank you for your input and I do understand your point of view, but we're passionate about supporting those who support the automotive lighting industry by introducing new products for the world to benefit from. We will never support a product that comes from a heritage of stealing someone else's design.

@officialWWM

7 жыл бұрын

Headlight Revolution I don't live in America so I don't give a shit about all that "made in USA, protect our jobs" bullshit. The US product is simply overpriced. I'd also be surprised if it's not made in China, or at least some of the components anyway! It's about value for money and the overpriced US made items don't offer that.

@rodwellcort7503

7 жыл бұрын

THANK YOU!!!

Everything led I had burned out fast even the stick on 5050 strip lights most of the new car I see have one side burned out China made crap

@HeadlightRevolution

4 жыл бұрын

Hey Brian, The new stuff is so much better. This technology has come a long way since this video was made.

id take the chinese one lol, its the brightest one

@HeadlightRevolution

7 жыл бұрын

If you say so... When we tested them and actually measured usable light output they were far from the brightest option...