Those color matching emblems are sick! Great choice.

Man the easiest way to remove those emblems. Did both under a minute. Thank you

Thanks for the knowledge. This video is very helpful

I must say that looks great!! 👍👍

I work at a vehicle wrap shop and we use a steamer to remove emblems. Much safer then a heat gun and works great

@so5thgen

4 жыл бұрын

I agree! But I wasn’t trying to save these nor did I have a steamer. I should probably order one they do come in handy

@timmcgrath6496

3 жыл бұрын

What brand of steamer?

@mad125100

3 жыл бұрын

@@timmcgrath6496 see the link. You do need an account to purchase it but I think there are similar units available. Like I said it works great.

Awesome job! You clearly take pride in your work and your trucks!

@so5thgen

4 жыл бұрын

Can't thank you enough! Look forward to the future and working together!

@workhard9513

4 жыл бұрын

Painted mine just the opposite of yours... The badges look so good in black and white either way you do it 👍🏼👍🏼

Those are 🔥🔥🔥

Awesome job. Thank you.

Bought the same pry bar kit and used the video for reference, worked like a dream!!!

Man that looks awesome!!

Super clean truck

I'll share with you the best tool I've found to remove badging and emblems from a vehicle, especially on a fairly new truck while the adhesive is pliable- use fishing line. Preferably 10-15ib. It acts like a knife to remove the badging without a pry tool. Slide it behind the emblems and work it back and forth slowly pulling downward. Don't work it too fast or you'll snap the line from the friction. I also recommend doing it in the sun or just apply a little heat to soften the adhesive. If you try my process and like it, please let me know. Thanks.... hope you find this trick very helpful

love your emblems. your truck looks nice with them.

@so5thgen

4 жыл бұрын

Thanks!

That’s sick!!! 👍😝

Sweet!!!

Stormtrooper look, lovin it....got myself the vader look going on. Hood and tailgate badges are next!!!

Rev Auto at the 11 minute mark!!! Best company!!!

@so5thgen

3 жыл бұрын

We use to run them a lot we’ve since swapped to renegade

That’s slick!

Thank you

Rear badge looks sick asf

Do they sell the hood emblems that light up?

Does this method work on the rebel badges that are further up on the center of the hood ?😊

What did you used to clean the surface

nice set up with the tires. what set up u use too look good i have a 2020 limited.

Looks great bud.

@so5thgen

4 жыл бұрын

When are yours getting ordered!?!

That looks bad ass, man! 👍

How do I get this doesn't show it on the website

Hey truck is awesome. Question do you get any road noise at all from those tires? I gotta get ride of my ridge grapplers. They are to loud! I want no noise!!

I can't get to the store in the description. Could you help me out? I'm trying to match some polished aluminum wheels.

Can you fit a 2020 badge bezel on a 2019?

Just used this technique to replace new hood badges

Have they made lighted emblems yet when they do thats when I will buy them. If anyone knows let me know where to buy them and who sells them.

What is the size of the rims

They got that fluid film in there through those same access ports under that badge

Loved the video, in the process of installing LED 1500 hood badges. You mentioned you use the first pry tool on the end of the "5.7" section, but when you completed the step you slide the pry tool first under the "H" word and then use the other pry too to lift up. Does it matter? I just don't want to mess up the OEM ones.

@namansharma3408

2 жыл бұрын

shoudnt matter

I would like to do my longhorn like this but my white is a pearl white so I might have little problem

My 19 bighorn hood fills with water thru these badges. I just redid the 3rd light leak that was soaking my interior,love the truck but the seals suck

Awesome .

@so5thgen

4 жыл бұрын

This turned out perfect!

@frankfordgarage5711

4 жыл бұрын

@@so5thgen what did u do to your taillights? Never saw a video

@so5thgen

4 жыл бұрын

Frankford Garage they are wrapped Jon from AutoAlterations hooked it up

Where did you get those mirror covers ? I have the same truck been looking cant find them anywhere for that style mirror

@so5thgen

10 ай бұрын

eBay if you need help locating them let me know

I just got a new 2022 1500 Bighorn and I was looking for the 1500 5.7 liter badges that light up do they make them?

@so5thgen

2 жыл бұрын

Yes they exist - quick google search you’ll see them

😍🤩!

@so5thgen

4 жыл бұрын

huge difference!

I have a 22 Ecodiesel. Of course the hood badges say so. Does anyone make a replacement emblem that doesn't designate the engine on the badge in chrome? Google is no help. I don't see one out there.

How do i go about getting some color matched to the delmonico red?

@so5thgen

4 жыл бұрын

Reach out to Jeremy at RetroshopLLC on Instagram and tell him we sent you

Any upgrades to the key fob? The chrome on mine is coming off from carrying a knife in my pocket

@so5thgen

2 жыл бұрын

There’s a few companies that make covers. But if it’s super scratched I would recommend replacing the housing if it bothers you

I saw you have an aftermarket Cold Air Intake System. Is there a benefit to have that? I have been reading a lot and there are definitely mixed feelings but ultimately found it doesn't make a difference.

@so5thgen

3 жыл бұрын

It’s not so much a power mod. Although it does yield some minor power and fuel mileage performance improvements it doesn’t negate the initial cost solely based on power. It’s more of an aesthetics mod in my opinion. Although it does provide ease of filter maintenance ( 100k intervals) while producing cleaner air into your engine. And I forgot to mention it sounds amazing 🔥 If you’re interested in one let us know!

I need these for my 2020 1500 classic. Tried to find them. Any help?

@so5thgen

2 жыл бұрын

Retroshopllc

How do I order those white badges I want them for my 2021 Ram

@so5thgen

2 жыл бұрын

Retroshopllc

How did you black out your grill? I'm in the process of doing that now

@so5thgen

2 жыл бұрын

Pull the inserts out and wrap our paint

Very nice!! Like you're wheels. Hell I like the whole truck. What's the offset on your wheels and size of the tires and is it leveled? I have a 2020 Warlock I'm sure I can just order the tailgate badge as I don't have badging on the hood.

@so5thgen

3 жыл бұрын

They are 20x12 with 305/50R20

@jeffshultz3883

3 жыл бұрын

@@so5thgen Thanks! I appreciate the reply.

About to replace all my emblems with similar Black/White painted and this video is perfect. I ordered the same pry tools. What kind of cleaner was in your spray bottle that you use?

@so5thgen

4 жыл бұрын

Glad I could help, if have you rewatch my video but I’m pretty sure it was just a spray wax

@iananderson8920

4 жыл бұрын

@@so5thgen Thanks so much! I re-did all emblems this weekend and your video was so helpful! Yours was the only one that showed how to remove the 1500 Hemi 5.7L Badge. Big fan of the channel as well.

I tried going to the website to find those emblems and couldnt find them. How do I get some? I want those exact ones

@so5thgen

2 жыл бұрын

Retro shop LLC on IG

Where did you get the emblems from?

@so5thgen

4 жыл бұрын

Retro shop llc all the info is in video description

Hi there! 👋 what size of wheels and tires are you using?? They look nice

@so5thgen

2 жыл бұрын

Currently running 22x12 on 305/45R22

Just purchased a 2019 Ram 1500 2wd new body style and I plan to put on a 2.5 front leveling kit with 35x12.5 tires on 18x9 wheels! Does anyone have any knowledge as to if this would cause any rubbing? If so what can be done to combat that issue? Also, will I absolutely need to purchase to control arms? And why? (First time truck buyer & first time dealing with large wheels/tires and any type of leveling kit)

@casperhogs

3 жыл бұрын

There shouldn’t be any rubbing but if there is it will only be at full lock in reverse. You could just trim off a little of the plastic wheel liner. I have the 2.5” MotoFab level and did not need to change the control arms. The angle on the ball joint still looked about the same as stock.

@justpalms9978

2 жыл бұрын

I’ve got a 2021 3500 and just got a 2.5 bilstein leveling kit with 35x12.5x20. Rubs like a son of a bitch.

I love the white badging. I have the 2021 badging with the e torque on it. Where can I get my badges in the ivory white tri coat pearl. Thanks

@so5thgen

3 жыл бұрын

Thanks! And message RetroshopLLC on Instagram! They can do any custom colors on any make or model

@thomasstatham8246

3 жыл бұрын

@@so5thgen I don't do the Instagram thing. Is there another way:)

@so5thgen

3 жыл бұрын

retroshop.us/

@thomasstatham8246

3 жыл бұрын

@@so5thgen appreciate it:)

what lift you got?

@so5thgen

4 жыл бұрын

2.5” leveling

I want these so bad for my new white 1500 but they’re SO EXPENSIVE

Where's the paint protection tape from?

@coqueto45

2 жыл бұрын

You mean painter's tape?

Where did you get the emblem? For the tailgate

@so5thgen

2 жыл бұрын

Jeremy from Retroshop LLC

What air intake do you have and did you get more mpg with it if so how much.

@so5thgen

2 жыл бұрын

Volant performance made by Corsa performance if you use our discount it’ll save you 10% “So5thgen”

@rl2769

2 жыл бұрын

I got a CAI and mid muffler delete and picked up 3 mpg

What size and offset are your wheels?

@so5thgen

2 жыл бұрын

I’m this video 20x12 -44 currently running 22x12 -44

Great video. What type of cooled air intake u install on yours. I have a 2020 laramie what to do an intake

@so5thgen

4 жыл бұрын

Victor Garza I’m running a Volant Performance intake. Made by Corsa Performance

Can you give me the sight again please The one at the end of the video did not work.

@so5thgen

2 жыл бұрын

retroshop.us

Can anyone answer me on this i have a 2017 ram and i want to kno can i install the 2019 tailgate emblem on the 2017 ram?

@so5thgen

4 жыл бұрын

Ryan Jefferson if you give me a few days I can measure my 4th vs my 5th emblem.

@ryanjefferson2006

4 жыл бұрын

@@so5thgen thank u

@ryanjefferson2006

4 жыл бұрын

Hey wats up you have update?

@so5thgen

4 жыл бұрын

Ryan Jefferson I’m currently out of town I can’t get the dimensions at the moment

Yo Man What size Tires are those and what's the name of rims I really like them. I have a 19 Ram Delmonico Red and I'm blacking everything out on mine! Thanks

@so5thgen

Жыл бұрын

Wheels are pure grit PG102 20x12 they also make a 22x12

How much are those to be color matched? Super curious

@so5thgen

10 ай бұрын

It’s roughly 500$

Where did you order the White badges from?

@so5thgen

Жыл бұрын

Retroshop

@acaldero26

Жыл бұрын

@@so5thgen I need more information on how to place an order 👍

where to buy the painted emblems?

@so5thgen

2 жыл бұрын

Retroshopllc

Where do I get these!!!

@so5thgen

2 жыл бұрын

Retro shop LLC

its just too bad there isn't a black liner behind the back emblem to keep the water to get behind it..otherwise very nice bro..

What lift are you running? Love the stance!

@so5thgen

Жыл бұрын

2.5” level

How much was it to get those exact emblems

@so5thgen

3 жыл бұрын

375-400$

@davidagurcia7518

3 жыл бұрын

@@so5thgen damn thats pricy

@rorotkt16

2 жыл бұрын

Where did you get these? Looking for the same for my 3500 please??

plastic pry tools can still damage the paint!

I can’t find the Instagram page and I want a set of these super bad

@so5thgen

3 жыл бұрын

RetroshopLLC on Instagram or FB

How much did you pay for the emblems painted? That truck is 🔥🔥🔥

@so5thgen

2 жыл бұрын

425$

Price on these emblems please

@so5thgen

2 жыл бұрын

450$ ish from retroshopllc

They look great. One small thing is it’s Retroshopllc, not customs. Lol

@so5thgen

4 жыл бұрын

Thanks buddy and I know! Just slips out that way haha ** RetroShop LLC Custom Lighting

Where did you get those.... Unreal

@so5thgen

2 жыл бұрын

Retroshopllc

To save your OEM badge, hear from the rear!!!

Nice work. Question: How the heck are you averaging 17.1 MPG????

@so5thgen

4 жыл бұрын

Tom Arnold cold air intake, tuning, light tires and rims

@bull5919

4 жыл бұрын

i average 17.6 with 285/60/20 nitto grapplers with no intake or tunning i recalibrated my speedo though

@rl2769

2 жыл бұрын

@@bull5919 I get 12-13 on 265/65R20s

Much nicer looking without the cheesy chrome on white.

@so5thgen

4 жыл бұрын

For sure!!

I think this look pretty good but idk if they are worth $450 bucks

@so5thgen

4 жыл бұрын

Makes the truck stand out 🤘🏻

Too bad they don't advertise them on their website

@so5thgen

2 жыл бұрын

Message Jeremy on IG retroshopllc

What’s the price of this kit?

@so5thgen

4 жыл бұрын

DJ Cavalcanti roughly 400$ also depends on options

@bull5919

4 жыл бұрын

@@so5thgen he can keep those emblems for $400

@mickeyclaudio5068

4 жыл бұрын

Where did you purchase those badges?

@so5thgen

4 жыл бұрын

Mickey Claudio retrocustom llc talk to Jeremy

@DirtNassty

4 жыл бұрын

@@bull5919 LMAO ikr.....Jeremy is a cool dude though, he does some amazing work!

I dare you to punch the tail emblem as break your fist

@so5thgen

4 жыл бұрын

Danil Smith deal

@danilsmith7292

4 жыл бұрын

@@so5thgen good job!

I dented my tailgate r.i.p

@so5thgen

3 жыл бұрын

Removing the badge!?

@WarKlutch

3 жыл бұрын

so5thgen yup, because I rushed it

Wow that rear emblem removal looked miserable

@so5thgen

3 жыл бұрын

Wasn’t too bad just time consuming ha

@User37621

3 жыл бұрын

@@so5thgen I guess I’m just comparing to putting the black vinyl overlay decals on my chrome emblems lol

I tried getting this from these guy and was told to go to a paint shop! 👎🏻

@so5thgen

Жыл бұрын

Sorry to hear hopefully you contacted the right phone #