Great tutorial Justin! Thanks. The cross drag selection in the double wall window example was very useful!

@Thesketchupessentials

6 жыл бұрын

Thanks Patrick! Glad you found it helpful!

Thank you! This will help when I am trying to map out DWV system in walls & floors. I'm hoping it may also help with making sinks.

Thanks for your videos, I really enjoy them. I'm modelling a shop build to a very high detail with individual studs, windows, joists, plywood, even vapor barriers. I've got the model framed out and now want to add the siding but I'm not finding a good way to delete the siding inside of my windows and doors without painstakingly drawing lines on the insides of these openings and push/pulling the geometry until it disappears. I have curved windows in my design and this way is proving to be too time consuming. Solid tools do not seem to help here since my framing is grouped already. Can you offer any suggestions whether from videos you've previously done or something else I can try? Thanks

you honestly hit it on the nail with what i was looking for when it comes to opening the sink area thank you !!!!

Great Tutorials, been doing sketchup in business for 11 years, easy to get stuck into your known rut. You help introduce new things to add to my technique. Thanks

@Thesketchupessentials

5 жыл бұрын

Awesome - glad I could be of service :)

Great job, I learned some new things and re learned some old things!

You are an absolute lifesaver. I was trying to push through a rounded object and it would not cut through the rounded part, but using Intersect Faces With Model worked perfectly. Thank you so much Justin.

@Thesketchupessentials

2 ай бұрын

Glad it helped!

Hi Justin for some reason I am trying to pen a hole for a window in a diagonal wall and just can't any thoughts, thank you Stella

Gratis video. It helped me a lot. Thanks.

I will try to reverse the inner face of the wall, if the cutting windows computes it as a second plane to cut I let u know. Maybe :) thanks. I will try it. I did not know the cut component options

Thank you for those tips, your videos are really amazing.

Hello Justin, I would like to know how to do multiple cut on geometry? It turns to model every time after I did one cut.

Hi there, I'm trying to use the vector push pull, but it doesn't give me any way to open up additional options to select what I'm hoping too? This is in sketchup pro2020. Thanks! Love your work!

the trick with Push and Pull is awesome. thanks you !

How did you know that I was just trying to cut windows into a curved wall? I especially appreciated that you were clear about how to inference the back face of the object being cut. A simple, clear and well-presented explanation. Thanks again.

@Thesketchupessentials

6 жыл бұрын

Awesome - glad it was helpful John!

Thank you, man! You're helping me a lot!

OMG that was so simple, your videos are invaluable for beginners like me.

Super helpful contents! thank you

Thank you very much for your videos they are indeed very helpful and informative! I am a beginner in using SketchUp and I am facing a problem with the first technique I push the face to the edge of the wall but it doesn't end up cutting for me for some reason, may anyone inform me what is the problem is?

Great Work Justin, thank you

@Thesketchupessentials

6 жыл бұрын

Thanks Will!

As always! Another great Tut!

@Thesketchupessentials

6 жыл бұрын

Thanks very much! Glad you liked it!

in the 3D warehouse models I couldn't find any holes to cut out. Are the models from 3D warehouse possible for cutting out holes after they are downloaded in Sketchup with the pushpull or other tool from the menu to get an opening for a doorway or window opening?

Very cool stuff!

Great lessons, very efficient and rich.

@Thesketchupessentials

5 жыл бұрын

Thank you! :)

Great information. Thank you.

could you calculate the area of the cut during or along side the last process?

Great video, as usual Justin. I've been struggling with this and now I'll watch this vid at least 4 more times to learn it all. Very concise! Thank you!

Thank you very much for this great video! Looking for this sipmle information for one week! Wonderful tutorial! Wonderful channel! Liked and subsribed! Best regards from Chechnya! ;)

@Thesketchupessentials

6 жыл бұрын

Thanks very much! Glad you're finding it helpful! :)

Awesome explanation. Thanks mate

Hey Justin, can you please guide me to one of your videos on how to cut a model. I am wanting to cut up a modeled tile plane to fit into a small bathroom floor. Thanks in advance

8 years using sketchup, and i just happen to learn this, thanks

@Thesketchupessentials

4 жыл бұрын

Well now you know! :)

Thanks. In every respect your video was excellent and I thank you for making it.

@Thesketchupessentials

3 жыл бұрын

If you're an absolute beginner, you need to start with an absolute beginner tutorial. Practically, I cannot start with the absolute basics in every video because every video would be hours long. I recommend starting here - kzread.info/dash/bejne/dI5h17KDfNvHppM.html

Thank you so much! Very helpfull video, it saved me days of work.

you are an amazing man .. thanks for your teaching us Sketch up

@Thesketchupessentials

5 жыл бұрын

Thanks for watching!

to work this inttersection i need first to make model/group for this whati created [cylinder] than it works, and before deleting not necesary element wirst explode model ... not earlier.

Brilliant, thank you so much

@Thesketchupessentials

6 жыл бұрын

Glad it helped!

Awesome video! it helped me a lot!

@Thesketchupessentials

4 жыл бұрын

Glad it helped!

Cheers man!

I'm following along and notice when trying to create a window component that cuts out when you put it on a face, it doesn't work when the face is a group? So if I'm working on a model of a house, for example and don't care about wall thickness, I have to explode the group that contains the wall I want a window on?

THE BEST TIP & TRICK !

Justin classes are finished at UDC. I'm happy to keep going with your tutorials.

@Thesketchupessentials

6 жыл бұрын

Awesome - hope they keep helping out! :)

Gave me some great help.

@Thesketchupessentials

6 жыл бұрын

Thanks Robert!

I went through 5 other tutorials before I came across yours that would show me how to cut a hole through a shipping container! Thank you for such good instruction too!

@Thesketchupessentials

6 жыл бұрын

Awesome! Glad it helped you solve your problem!

Hi, Consider a Wall 0.3 m thick and tilted or rotated to X and Y axis. Then I am facing for how to cut. Most clips are shown with respect to x y axis but could you please create or advise for how to cut in such a situation

@Thesketchupessentials

6 жыл бұрын

Do these methods not work for you when your object is along a different axis?

Great video. i have learned a lot. thanks

@Thesketchupessentials

4 жыл бұрын

Awesome!

Nice! Do you have a simple way to take an image with transparency, and turn it into a 3D with the transparent sections cut out? I've got an expanded metal image that I want to turn into a model with holes in it. Thanks!

@Thesketchupessentials

4 жыл бұрын

Not really - most likely you'd just want to trace over it to create the face.

@Bytesmiths

4 жыл бұрын

@@Thesketchupessentials KZread really needs an "I really appreciate the reply, but I don't like the reality of it." :-( I'm trying to make an image of expanded metal print properly on a 3D printer. The though of tracing over thousands of holes is daunting!

Beautiful work congragulations

@Thesketchupessentials

6 жыл бұрын

Thanks very much!

Hi there, i just wanted to ask how would you cut out a non standard opening/shape from a solid? Say for example a keyhole.

@Thesketchupessentials

5 жыл бұрын

Why wouldn't these methods work? It's still cutting a hole with a profile in 3D...

Helped a lot

Thank you.

Hi. Thank you for your video. There is one moment I didn`t get. At 2:32 when you select model it`s a group, and at 2:33 ooop and it`s not a group. Took some time for me to figure it out.

this video very helped me.

What's the name of the tool that you used to make the terrain as a solid?

Thankyou 😊

Thank you

Suppose I have, say, a hippy sign black and while JPG file and I wanna project that onto a surface and then make cutouts? How would I do that? How do I take a ready patterns from a JPG and use that instead of having to draw in every single line and curve by means of a pen tool in Sketchup? Thank you! :-)

@Thesketchupessentials

5 жыл бұрын

Theoretically there are some extensions out there that can do this, though I haven't tested any of them, so I'm not sure I'm going to be very helpful on this one...sorry...

i want to cut a hole in a wall for window ,did same as you suggested but instead of a whole I just get a enclosed line which I further push becomes a box but no hole

my push pull tool as an offset setting on it? how do I get rid of/change this?

Great video will all of these examples of ways to cut holes that you showed work in sketch up version 2016 I noticed you're using version 2018. I can't afford to upgrade every time they come out with a new version I don't have the money or the need to do so

@Thesketchupessentials

6 жыл бұрын

I believe they all should work in 2016 as well, assuming that 2016 Pro came with solid tools (I thought that it did, but I'm not sure). I'm not 100% sure if DoubleCut is 2016 compatible, so that would be the big question mark for me. Thanks!

if we make group for an object , how can we use PUSH to cut ?

The last way.. was very useful!

@Thesketchupessentials

6 жыл бұрын

It's very easy as long as you're dealing with solids! Thanks!

Thanks so much for this. Some of the obvious things are quite difficult for n00bs like me to figure out.

@Thesketchupessentials

5 жыл бұрын

Glad you liked it! :)

I have some problems to get an opening in my inside and outside wall when they are all placed in a separate layer but are grouped, I want to have control over my layers. How should something be done and is this possible?

@Thesketchupessentials

6 жыл бұрын

Does option 2 - Intersect with face - not work?

Thankkk youuuuu sirrrrrrr 😊😊😊

Thank you smch... From Philippines

@Thesketchupessentials

4 жыл бұрын

Thanks for watching!

You start archicad.. You teach a lot with easy .. i am form bangladesh

(2) in "Slicex" you could create New Drum Loops and softs in any order from different slices. And keep the loop slices playing in and

Doing excellent bro

@Thesketchupessentials

5 жыл бұрын

👍

man I fu**ing love you! Thanks for the help!

@Thesketchupessentials

Жыл бұрын

Glad I could help!

Thanks but about the subtract function i couldn't do what you did cause it was saying that my cube wasn't a solid but why? Thanks if you can help 😊

@Thesketchupessentials

3 жыл бұрын

Your model either has a hole or an internal face

sir you great guru .

Thank

your a good guy!!!!!

Can u tell me if the wall is in grp or component can we cut the wall coz I’m jst started learning sketchup soo plz help me

@Thesketchupessentials

5 жыл бұрын

Did you test it out?

how can i cut windows and doors in a curved wall made of separate layers and bricks (bags)? i am designing an earthbag house, with curved walls and layers of bags represented in the sketchup design... and i want to be able to make doors and windows that can be adjusted, without having to do the tedious work of redoing every line if i want to make or move a window/door... there must be a way to do this... anybody know? thanks for sharing the helpful info/videos

Nice tutorial, i just cracked soft soft ;)

Good work dear keep it up

@Thesketchupessentials

4 жыл бұрын

👍

is there other extension like solid tools that is available on non pro versions of sketchup ?

@Thesketchupessentials

5 жыл бұрын

You could try Bool Tools - I don't think I have a video on that one - more info at www.thesketchupessentials.com/booltools (note that that's an affiliate link)

@chase1149

5 жыл бұрын

@@Thesketchupessentials aw thanks this really saves me a lot of time. your channel is awesome !

Good one; solid tools is a time saver.

@Thesketchupessentials

6 жыл бұрын

Yep - I hadn't done much with it before, but it was super easy to use. Will probably be doing more with it in the future. Thanks!

How can you create SOLED objects. Thanks.

10:58 I'm wondering if it's possible to add a pool inside a terrain without cutting holes in the terrain, so that I can reposition this pool easily. My idea would be to add an object mask inside the pool component or something similar.

@Thesketchupessentials

Жыл бұрын

I'd just add a grouped plane with a water material applied to it that you can move around to set the water height

How you can create SOLED objects. Thanks

i have been trying for over an hour now to use intersect faces with a kohler sink. but sketchup keeps crashing. what am i doing wrong?

can you subtract a solid object from multiple solid objects?

thanks

@Thesketchupessentials

3 жыл бұрын

Welcome!

ty

@Thesketchupessentials

3 жыл бұрын

👍

just found double cut in the extension warehouse, free!

great thank's a lot ^-^

@Thesketchupessentials

6 жыл бұрын

Thanks for watching!

respect

1. Push pull backwards 2. You cant push pull curved surfaces > use intersect faces with model > and delete the part you don't want 3. Cut components > create shape on a face > create component > glue to any + cut opening > create > make a copy of the component > model and extrude the component > component is automatically extruded 4. Doublecut extension 5. Use solid tools > subtract

I created a component and then tried to push a hole through it and it seems not to work with components. Is there a way to easily cut holes in components?

Justin, Hey buddy, I really love your work. I've hit a wall...literally. I'm trying to push a rectangle through a cube and hit the other wall. The other wall doesn't want to break. If I click in the area I'm trying to delete, hit the delete key, it ends up deleting the entire wall instead of just the rectangle. I tried drawing the rectangle on the opposite wall, but it won't allow me to pull it. I'm sure this is vague, and I'm sorry. If you have any ideas, it would mean a lot.

@Daft4775

3 жыл бұрын

Same problem

Great......!!!!

@Thesketchupessentials

4 жыл бұрын

😎

Does the push tool work for holes in the new online version of SketchUp? I can't get it to work.

@kennybellew

5 жыл бұрын

Never mind. It turns out you can't use the push if the object is grouped. This would be a good thing to mention.

@Thesketchupessentials

5 жыл бұрын

That's correct - I think I've covered the principle in several beginner videos, but not in this one

@kevinbrennan291

4 жыл бұрын

@@Thesketchupessentials Please Do add that info, I went through the video a couple more times to see if you ever instruct to Explode the object before it works. Took me a long time to figure that out!

like you add your own sample to the soft roll and when you play it it always plays longer than what is shown in the soft roll and

I am happy for i first comment i form iraq i say you so thank you i am sorry for langauge is poor.😆😍 ... شكرا لك من العراق

@Thesketchupessentials

6 жыл бұрын

I understood you perfectly! Thanks for watching!

Bool2 gives you the Boolean operations for a few dollars rather than having to pay for the Pro version of sketchup. It works flawlessly in my experience.

@Thesketchupessentials

6 жыл бұрын

That's a good point - I should have mentioned that - thanks Andy!

A side note: I don't know if he said it, but you need to explode the components first, if you have grouped it, before you can push/pull through an object. Took me a little while to figure out.

I am using Sketch Up Free and have been having issues with creating openings in walls. I have tried #3 because it seems to be the easiest for my situation. I need to make 2 windows, a door, and a large garage door opening. I follow every step in #3 but the single-thickness rectangle (wall) still does not cut to create an opening. I have tried #1 on a 3-D wall also, which did not work. Do you or anyone else have any advice on what to do?

@janicehuang5493

4 жыл бұрын

I am new to sketchup, using free trial version. I have the same problem cutting thru the wall. It seems that #1 push won't work if your object is grouped. I have installed and enable double cut, but it won't show in right click menu. Have you found answers to your question? Thanks.

ground in just 17 minutes, amazing.