5 Concrete Tools to Save HOURS of Time

Having the right tools is the biggest advantage you can give yourself in construction. These 5 tools will make you a bettter set up man. Here's the first video about the hammer Scott invented:
• The Hammer I Invented
Buy the Formsetter here: www.essentialcraftsman.com/fo...
Free Starter Blacksmithing Tool List bit.ly/blacksmithingtools
Free Guide - 100 Tools Every Craftsman Must Have bit.ly/EC100tools
Enjoy EC? Learn about Essential Craftsman Academy!
essentialcraftsman.com/academy
This is the best way to support Essential Craftsman and you get a LOT of perks as a bonus.
Check it out.
PODCAST👇
Spotify spoti.fi/39ezy3d
Apple apple.co/33dbrJQ
Stitcher bit.ly/3NWy8sY
KZread bit.ly/2n4HCLG
Second Channel (Podcast video, family, misc content) bit.ly/2n4HCLG
If you are going to hire a contractor for a big project PLEASE read our ebook first!
amzn.to/2v6qZ6j
T Shirts, Hoodies, and other Merch: bit.ly/2C7JFRv
Instagram / essentialcraftsman
Twitter / ecnatwad
Facebook / essentialcraftsman
Amazon Affiliate Links:
Amazon Store amzn.to/2pcUk8G
Makita 18v Impact amzn.to/2R9uamN
4 ft level amzn.to/389qsQa
Utility Knife amzn.to/2RjVRJL
Palm Nailer amzn.to/2LhvTTd
Spencer Tape amzn.to/2EQWxPy
Carpenter Bags amzn.to/2XeBaC1
Belt bit.ly/3MsdijV
Hammer amzn.to/31y4q66
Tape Measure amzn.to/2WYg23Q
Skil Saw amzn.to/2UcQyLi
Video Equipment and Misc.
Main Camera amzn.to/2WG9qSC
Secondary Camera amzn.to/32tS2Vx
Microphone (for narration from office) amzn.to/2WquPnM
Wireless Microphone amzn.to/2IGpNto
Other Wireless Microphone amzn.to/397VmxJ
Tripod amzn.to/2XOJcOd
GoPro amzn.to/3znHgTA
GoPro Tripod amzn.to/3aL8pFH
Battery Bucket amzn.to/3GVR9cV
ActionPacker amzn.to/2l7Msqv
www.essentialcraftsman.com/

Пікірлер: 97

  • @CDeanhartman
    @CDeanhartman2 ай бұрын

    Tajima makes an excellent retracting plumb bob with magnets; it’s fantastic.

  • @NCprivateer
    @NCprivateer2 ай бұрын

    I cherish my tools and a lot of people think it’s strange how much I care about quality tools. I have been buying tools since I was 18, 20 years ago. Every year at Christmas we have a big family Christmas party and I always cringe opening what others wrap up and offer as a gift. I still have a lot of their gifts in the package hanging on the wall. Keep up the great content.

  • @arustydodge2111
    @arustydodge21112 ай бұрын

    Since my Apprenticeship in the 80’s I’ve used a “clean” chalk line reel for my plumb bob. Has always served me well, and my string is never a tangled mess. Gotta get me one of your hammers! 😉

  • @Robmancan1987
    @Robmancan19872 ай бұрын

    No better feeling than having a tool support you. A bond is formed and respect is given to the people who made it.

  • @DUDE72341
    @DUDE723412 ай бұрын

    love the form setter, one item i've seen overlooked on many concrete jobs....wood wedges, for stripping...removing large sheets...easily..old timer taught me years ago...bust a joint , connection , bond easily..no effort and will not wreck concrete edges...so simple

  • @gtbkts
    @gtbkts2 ай бұрын

    Thank you guys for all the awesome content and all the amazing videos!!

  • @lpsowns
    @lpsowns2 ай бұрын

    Practical, straight to the point and no-nonsense!

  • @roccoconte2960
    @roccoconte29602 ай бұрын

    Thanks for the tool talk .

  • @kdb699292
    @kdb6992922 ай бұрын

    Thanks

  • @antman7431
    @antman74312 ай бұрын

    Thanks for that Gammon reel tip! I will literally be keeping that in my back pocket...or pouch...or bag

  • @jeremiahswihart8983
    @jeremiahswihart89832 ай бұрын

    Man, I love your content I sure can’t wait to see more size swan and you doing blacksmith and some of my favorite stuff and I enjoy the construction I’m in the excavation business so a lot of this stuff resonates with me my family was all loggers until we got into excavation sodefinitely enjoy your content man. Thanks.

  • @ytbillybob
    @ytbillybob2 ай бұрын

    I love you man! Going through some personal challenges and I decided to seek you out in order to forget my problems for just a bit. I'm 67 and struggling with personal relationships. Thank you for being here for me right now.

  • @jocrpnter
    @jocrpnter2 ай бұрын

    Been using a gammon reel with a 16 Oz bob for over 30 years. Fantastic.

  • @jacobweaver6227
    @jacobweaver62272 ай бұрын

    Thanks for The tips have a great day.

  • @hoagland1943
    @hoagland19432 ай бұрын

    Whether it's your favorite laptop computer, favorite pen or tool it has to be efficient and work for you. Like the videos. Thanks for sharing.

  • @don66hotrod94
    @don66hotrod942 ай бұрын

    110% agree on the Burke bar.

  • @tonyn3123
    @tonyn31232 ай бұрын

    My career started in 1971. During those 47 years I did a lot of surveying and construction layout. I have tried the string reel you demonstrated. My choice was just to holster my plumb bob and drape the string around my neck. Mind you I rarely used my bob much higher than I could reach. I can see the benefit of the reel if you are dropping two stories and only used intermittently. For constant use, I still prefer string draped around my neck. Even after my job became more into management, I never stopped carrying my holster (leather, custom made bob holster by my uncle) and bob in my vehicle with the string neatly wrapped around the neck. Good video. Thanks.

  • @aerialrescuesolutions3277
    @aerialrescuesolutions32772 ай бұрын

    Excellent

  • @Trildin
    @Trildin2 ай бұрын

    Thank you sir! Starting my own little business I love the tips. Though, idk if I can afford 5 lbs of steel for $250 xD

  • @campbellbuilt
    @campbellbuilt2 ай бұрын

    Love the idea of the retractable Plumb Bob

  • @Bigredkarl
    @Bigredkarl2 ай бұрын

    You are a fountain of knowledge

  • @ja7157
    @ja71572 ай бұрын

    Just bought an 8lb 16” hickory handle Truper . Going rate brand new 55.50 got a steal of a deal for 30$ off the FB market place , can’t wait to use it tomorrow.

  • @TUKByV
    @TUKByV2 ай бұрын

    Pretty neat.

  • @thecabinguy3006
    @thecabinguy30062 ай бұрын

    In my opinion (25 year framer). A corded saw at elevation is not very pleasant. A cordless with a rafter hook is nice. The safety crew is on us pretty hard up here in Alberta. Rope and hose is bad enough. If you can run a cordless saw, with rafter hook, there’s no need for a saw you can lower and raise with an extension cord. Love the vids. Keep em coming

  • @PalauCreationsbyQCP
    @PalauCreationsbyQCP2 ай бұрын

    Liking before watching as usual🎉😂❤

  • @DNGJustSnakes
    @DNGJustSnakes2 ай бұрын

    Nice list...we always used a standard 4lb stanley sledge for stakes and I carried a craftsman 28oz california framing hammer used a lot for digging but craftsman quit making that nice hammer years ago...thankfully i still have mine though...lol

  • @stevenslater2669
    @stevenslater26692 ай бұрын

    Several more tools to add to my wish list. Between the Essential Craftsman and Stumpy Nubbs that list keeps growing. Then I remember I’m almost Cy Swan’s vintage, but nowhere near his physical condition! More like an old dog sleeping and dreaming of things he did as a young pup. I’m gonna buy that reel for my plumb bob even though the doctors have told me to stay off ladders…

  • @HogeN1337
    @HogeN13372 ай бұрын

    3:03 IF want to look inside AVE have a 10-15min clip about a plumb bob with Mercury

  • @essentialjudge2279
    @essentialjudge22792 ай бұрын

    A plumb bob on a gammon real a good tape a good hard level sight or a transit a framing square a chalk box some marking paint and a blueprint. I used to love it. Layout is a lot of fun

  • @hopr21
    @hopr212 ай бұрын

    Burk bars a great but we have burk bars with hook and chain to not only lift pry and push but you can now pull with helps us more often than not

  • @apainlessone
    @apainlessone2 ай бұрын

    I thought for sure the first thing You would mention is "square " poles vs round ones for layout and forms.

  • @eddarr2000
    @eddarr20002 ай бұрын

    As a concrete guy in Las Vegas I always like when you talk about working in Vegas for MS and Martin and Harris. I believe we know a lot of the same people including Dennis and most of the Stephensen family. I worked most of the 2000's for Campbell Concrete which was huge but probably came along after you left. You probably worked for MS when their office was on Cameron. I was working for a big plumbing company who's office was right across the street. My current company we do concrete, framing and door/trim. Always enjoy the videos. Keep them up

  • @tylerfoss3346
    @tylerfoss33462 ай бұрын

    Another wonderful video from a master teacher! AND you have designed and patented a tool!! Bravo, sir! BRAVO!!!

  • @drewbacca1981
    @drewbacca19812 ай бұрын

    I'm a Land Surveyor. I've had a plumb bob and a gammon reel hanging from my belt since my first day 20 years ago

  • @jjducharme1
    @jjducharme12 ай бұрын

    Just make sure you keep the sand out of that Gammon Reel, they don't loke that. And a plumb bob becomes a hammer when needed. (a surveyor).

  • @psidvicious
    @psidvicious2 ай бұрын

    Gammon reels are great but the big box stores never carry them. Always have to go to the specialty surveyors supply store to get them. I’d always pick up 2 at a time so I wouldn’t have to go back for a couple years. They’ve got the nice braided line in them too. Not the twisted line that spins forever. Just a heads-up though: They’re not easy to change the line in. They need to work on that.

  • @ranacherian
    @ranacherian2 ай бұрын

    Got excited to get the form setter hammer and i see it has Snap On price. Nevermind 😂

  • @stupidassol

    @stupidassol

    2 ай бұрын

    Did you expect anything else?! 😅

  • @durantplayz7111
    @durantplayz71112 ай бұрын

    Whenever im in the zone and getting everything done efficiently my coworkers tell me "we get paid by the hour"

  • @JarSquats

    @JarSquats

    2 ай бұрын

    "I don't want to be doing the same thing in an hour" Response

  • @74stevedc
    @74stevedc2 ай бұрын

    Rebar tie gun, if you install lots of rebar. Also magnet on bottom of a grade stick holds grade nail tap it grade right on. I call it a elephant trunk hooks on mixer keeps concrete from splattering around speeds up production pouring footing's. Also concrete chute tripod great for supporting 12' -16' chute.

  • @stupidassol

    @stupidassol

    2 ай бұрын

    Thanks for the grade rod magnet tip! So be using that one tomorrow!

  • @justinriley8651
    @justinriley86512 ай бұрын

    a closed faced spincast reel with spiderwire makes a good set up for a plumb bob. its better than a chalk line. thats a pipefitter trick.

  • @Donny65
    @Donny652 ай бұрын

    Hey I’m 66 and still playing with concrete. And pretty good at it .

  • @WraithlingRavenchild
    @WraithlingRavenchild2 ай бұрын

    I've used new unchalked chalk line for my plumbobs.

  • @FullMetalAttackTitan9tailsHero
    @FullMetalAttackTitan9tailsHero3 күн бұрын

    I cant think of one time i would ever use a plumb bob over a level or laser

  • @ramidi1
    @ramidi12 ай бұрын

    Where can you find the Burke Bar in EU?

  • @ja7157

    @ja7157

    2 ай бұрын

    A San Angelo bar would work just as good ..

  • @ramidi1

    @ramidi1

    2 ай бұрын

    @@ja7157 those are easy to get in EU, but no they are not as nearly as good

  • @psidvicious

    @psidvicious

    2 ай бұрын

    @@ramidi1 Where ever you see tilt-wall construction or pre-cast concrete work, you’re likely to see some Burke bars being used. Ask them where they got theirs. They’re also not hard to make if you’ve got a little welding experience.

  • @mannysabir1339
    @mannysabir13392 ай бұрын

    I have that Makita 40v saw, and I'll say that it's one of the best purchases I've ever made. Cut sheathing, 2x4's AND headers with the same saw. No problem at all.

  • @ytadmin
    @ytadmin2 ай бұрын

    What he patent number?

  • @JohnDoe-vg1mk
    @JohnDoe-vg1mk2 ай бұрын

    That form setter hammer would be all the better if it had a way to pull nails, since duplex nails are always around when youre forming

  • @agr18181

    @agr18181

    2 ай бұрын

    Think twice, hit once. Solved. Thanks.

  • @JohnDoe-vg1mk

    @JohnDoe-vg1mk

    2 ай бұрын

    @agr18181 so you never strip forms? Just leave them there forever? You've never had ti put a temporary brace up?

  • @andrecontois8510

    @andrecontois8510

    2 ай бұрын

    ​@@agr18181never had to strip the forms u put together???ok

  • @agr18181

    @agr18181

    2 ай бұрын

    @@andrecontois8510 that's a job for the burke bar he showed first

  • @douglaskleinjans4232
    @douglaskleinjans42322 ай бұрын

    Gate?

  • @MrSpriggs1234
    @MrSpriggs12342 ай бұрын

    Its always worth buying the best tools if you know your gonna use them frequently. The amount of time saved will usually pay for the tool after a job or two, TIME IS MONEY

  • @firemanj35
    @firemanj352 ай бұрын

    Lol, yes, some people are tools 😂 but great stuff today.

  • @CatDaddySteve
    @CatDaddySteve2 ай бұрын

    #1 Essential Tool is Jose #2 is Juan

  • @ja7157

    @ja7157

    2 ай бұрын

    Yesir!! And my names Jose lmao

  • @jamesengland7461

    @jamesengland7461

    2 ай бұрын

    Those are people, not tools

  • @eduardocarrillo1864

    @eduardocarrillo1864

    2 ай бұрын

    😂😂

  • @carpintero01

    @carpintero01

    2 ай бұрын

    @@jamesengland7461any self respecting contractor/carpenter understands, just like yourself, that people aren’t tools.

  • @tristanmartinez2667

    @tristanmartinez2667

    2 ай бұрын

    May favorite tool is the apprentice 💪🏽

  • @spikarooni6391
    @spikarooni63912 ай бұрын

    Noice😊

  • @johnparkhurst825
    @johnparkhurst8252 ай бұрын

    Another Ironside Chat!

  • @williamdemilia6223

    @williamdemilia6223

    2 ай бұрын

    yes and the perfect lighting.

  • @claytonjohnson8695
    @claytonjohnson86952 ай бұрын

    Let's not forget about a screw driver, 18 or 20 inches with a full tang thru the handle. Makes stripping way easier

  • @nannesoar
    @nannesoar2 ай бұрын

    Essentialcrapforfastconcrete-man

  • @finders-keepers1518
    @finders-keepers15182 ай бұрын

    I actually do work with some "tools" Scott😂

  • @ElonMusk-hx8yw
    @ElonMusk-hx8yw2 ай бұрын

    Forgetting the pin or stake puller

  • @Electric-Bob
    @Electric-Bob2 ай бұрын

    Productivity, like anything can be Overdone.

  • @mackellyman5642
    @mackellyman56422 ай бұрын

    Southwest gets it done...

  • @diverdave4056
    @diverdave40562 ай бұрын

    unless the rules have change since I retired a few years ago ... A Union carpenter in Chicago is not allowed to bring his own power tools or a Burke Bar - levels longer than 24 inches - tape measures longer then 24 feet - or sledge hammers to a Union construction site . The company he works for must supply them with these tools . We are only allowed to bring our personal hand tools .

  • @mackfisher4487

    @mackfisher4487

    2 ай бұрын

    Chicago former IBEW member: unions can do a lot of good for their workers and for their employer, but they also can go too far. Your example with the unions position of making more jobs union job's but Cost unions more projects or jobs because they are not as competitive as scabs, I mean nonunion workers.

  • @philipshields1183
    @philipshields11832 ай бұрын

    Thank you for the Spencer, But...... Find the sweet spot on all those tiny(impossible to find screws in the housing) and do yourself a favor by finding the sweet spot between too slow to wind up & too fast and set those screws with red loctite/ or at least blue...., the maul(maybe a different video) fully agree, it's an abomination, but does the job with a seriously kung fu grip(risking carpal tunnel surgery), tajima is a no contest as is gammon reel. Please stop mentioning that square from Australia as they have been out of production since before your first post... Years ago, emails every 3 months have been offered zero reply. The Irwin chalk line box is awesome, but Only to hold your big plumb bob if some dipass broke your Bosch laser for that dot way up you need. Thanks for your channel, I'm pretty sure it lowers my blood pressure a little bit, which is good, but how do you get to essential Craftsman 2. I've looked everywhere. You mention it over and over again but in my extensive search it's like it doesn't exist? And thank Kelly for all her efforts and putting up with the hours of a true Craftsman even though she can't figure out how to source essential Craftsman license plate frames 🤣

  • @IsmailNuzaifKokky
    @IsmailNuzaifKokky2 ай бұрын

    .

  • @reneadinaro8183
    @reneadinaro81832 ай бұрын

    You think you know fast concrete? Have you ever taken a look at the skyline in Manhattan and its surrounding boroughs? Most of those skyscrapers are concrete or their upper floors are. How do I know? Besides building concrete high rises for over 20 years, the rule, the logical rule is if a building is commercial it goes up steel with a Q deck and I beams. If it's residential, it goes up reinforced concrete. Why? Because more penetrations through the deck for electric power, plumbing, gas for stoves, more sinks, more toilets. On a steel job the mechanical trades would be there for a year of Sundays drilling their holes through concrete, 9-wire mesh, and Q deck. On a concrete deck, you erect with plywood, and they do their layout on the ply wood and tack on some plastic pipe shaped stop. Put your rebar around it, pour your concrete and let set. Strip the deck and when you come across a hole, bust the plastic and run your pipe. That's it. The tallest concrete structure, building, skyscraper in the world is located on the south east side of Columbus circle. There are some buildings that are taller but their apex is a confined space. The Columbus circle building, you can stand on concrete at it's highest point. I know because I was part of the crew of a couple of hundred guys that helped build it When it comes to building with concrete with speed, Vegas couldn't carry New York's tool bag. You're welcome.

  • @Trildin

    @Trildin

    2 ай бұрын

    🤡

  • @charlesviner1565
    @charlesviner15652 ай бұрын

    👍🔨📐

  • @swampwhiteoak1
    @swampwhiteoak12 ай бұрын

    Sorry, but similar hammers have been on the market for decades. Nobody else patented it.

  • @michaelaskey6130
    @michaelaskey6130Ай бұрын

    Lay out in the mud with that tape and it will be junk in one morning .

  • @TheUncleRuckus
    @TheUncleRuckus2 ай бұрын

    Yeah a cordless saw will boost productivity, until you have to charge the stupid batteries, or spend an additional $200 to $400 for NEW Batteries or worse yet buy a new Saw bc the POS shite the bed on you after 25 cuts. You can keep your Overpriced, and Disposable cordless garbage that require you to buy moronically expensive batteries that end up in a landfill within a year or two when one of the cells won't charge, or a component on the motherboard burns out. I'll stick with my corded tools that work whenever and wherever I need them no matter what for decades. These are Tools I can FIX when something breaks. The only Battery power tools that are in my toolbox are Hammer Drills, Drivers, and Impacts. 🤷

  • @michaelcarroll991
    @michaelcarroll9912 ай бұрын

    Haven't you alresdy made videos about this before? Man sure wish we had more videos with Nate instead.

  • @TUKByV

    @TUKByV

    2 ай бұрын

    Not everyone has been following this channel for years.

  • @mackfisher4487

    @mackfisher4487

    2 ай бұрын

    There is room for both the philosopher and his son

  • @oswap

    @oswap

    2 ай бұрын

    You complained on the power forge video too... 1.35mil subs, he's not going to always please everyone.

  • @TUKByV

    @TUKByV

    2 ай бұрын

    @@oswap Good eye!

  • @michaelcarroll991

    @michaelcarroll991

    2 ай бұрын

    @@oswap negative batman

  • @peehandshihtzu
    @peehandshihtzu2 ай бұрын

    Oh no, most people are huge tools, LOL. For real, there is a reason why the Department of Corrections is hand in hand with the Department of Natural Resources. Inmates = People = Natural Resources = Cheap Labor = Profit. :)