tip number 4 is just perfect! solved the problem to switch solo button+wah at the same time ! this pedalboard its an insane versatility machine! thanks a lot you helped me out so much !
@ogmakefirefiregood10 ай бұрын
I have the Boss GX100. I absolutely love it. Tried the tonex with it, but the feel isn't the same. It's much easier to program as well.
@DoctorMcFarlandStudios Жыл бұрын
I do like the C Num option on the Boss products. Boss ES-8 and MS-3 are great for that.
@DaveWebbMusic
Жыл бұрын
I haven’t used either of those. But an ES-8 is on my want list.
@portuguesebeer506911 ай бұрын
Awesome! Cheers from Portugal 🤘🍺🇵🇹
@waltscott6161 Жыл бұрын
I found a guy on youtube that does a reverse noise gate (Higher Threshold, Low Release) will help cut the noise on high gain when not playing and automatically when playing which I found helpful in cleaning solos and when done the Threshold returns to a higher level to keep things quiet. I have a setting of a Threshold of 40 / Release of 8 on the block, in the Assign, Target Min 40/ Target Max 8, Source is Input level, mode is moment. I've also experimenting with Ducking on the Master Delay, turning the Master Delay on with my solo boost. Almost eliminates using reverb on my gain settings. Stereo tip was cool. Didnt know that turning on the FX Expansion killed the Stereo output, Good job!
@bingefeller
Жыл бұрын
That’s Jared Gunston, he’s great. He is a Boss South Africa demoer afaik
@waltscott6161
Жыл бұрын
@@bingefeller That noise suppression trick is awesome! I use it on 99% of my patches.
@GuitarLessonsMadeEasy5 ай бұрын
Great video mate. Thanks for that info !
@joejohnson8966 Жыл бұрын
Whenever I find a guitar channel that uploads in 60FPS, I sub. Amazing video.
@DaveWebbMusic
Жыл бұрын
I’ll take it! Thanks man.
@Dimanchy_Boss Жыл бұрын
Stereo - tip is cool! Will have to try. Thanks!
@Johnny-oy9fh Жыл бұрын
I had no idea the GTK could do this!!
@retrorick3941 Жыл бұрын
Cool tips, thanks!
@ShaighJosephson9 ай бұрын
I was putting cabs/iRs after effects for the longest time, then finally realized that it was a big mistake... You want to effect the signal with the cabs/IRs up front before your effects, not after where your cabs/IRs can be negatively affected by effects such as reverb... You want reverb to effect your tone with your cabs/IRs already in it... Pretty simple to discern the difference by running a dry recorded loop through it both ways, recording them, and then comparing the recordings... Check it out for yourself...
@rorykhanmohon
9 ай бұрын
Took me way too long to realize this as well and yeah there’s a big difference.
@ToddSalpen6 ай бұрын
I think is the other way around, GT-1000Core is full stereo functionality, thats why FX4 in mono wont make any sense, I still don't know any person that uses GT-1000core with the stereo input but is amazing, even if i add other effects that in the chain looks is hooked in mono, the stereo signal still works is amazing
@drewyoungs11 ай бұрын
Fast but a good segment.
@felipebarco Жыл бұрын
Hey! Great video! Thank you so much! Do you think it’s possible to make all this with MIDI on a Core? I’m not sure if I could program the same CC# for more than one parameter change.
@DaveWebbMusic
Жыл бұрын
Thanks for watching dude. Oh yeah, it’s all totally doable on the GTCore. I have one as well, and the Core is exactly the same just smaller in size. I have a Morningstar MC8 and the Midi control is awesome. Basically everything you can do on the bigger unit can assigned on the Core to an external controller. 🤘🏼
@nunocorvelo1875 Жыл бұрын
how to i get the guitar sound coming trough both speakers it only comes trough one speaker
@MrTyphoontyphoon Жыл бұрын
HI Dave ! than you buddy for your vid :)) im a super beginner with the GT , and i have a question please if i understood you well! at 1:46 , you mean you can change from the section A to B pressing the same switch ? ' 3 pacth for instance à . You mean that basically, you can have a set up of an am 5 section A ) switchable to the section B using the same swicth ? it is marvellous !!! than you for your reply,, and sorry my English is not that super good im Italian :)) !!ciao !!
@DaveWebbMusic
Жыл бұрын
Glad you’re enjoying the videos. Yep that’s right! You can find it in your assigns, it should say ‘Current Number’. Set it up as a toggle and you can back & forth between the 2.
@MrTyphoontyphoon
Жыл бұрын
@@DaveWebbMusic hey ! thank you very much buddy, grazie mille :)) sorry i explained it with a poor english but glad you got me , thank you very much i will try on my gt now :)))
@lotharwagner6648 Жыл бұрын
Hi I just bought a GT 1000 and I'm trying to have the delay level or delay volume controlled by expression pedal one on my user patch not sure how to do that any help would be greatly appreciated thank you 🎸👍
@DaveWebbMusic
Жыл бұрын
Hey man! If you go to 9:44 I show you how to assign certain parameters to the expression pedal. Follow the steps but instead select the delay volume. Should work a treat. 🤘🏼
@aaron91427 ай бұрын
Is the overall sound similar to that of the Boss Katana?
@wojciacho666 Жыл бұрын
Could you show me , how to do tip nr 1 , without pc or mac, just with the device
@wlliamson53 Жыл бұрын
Question about this thing. Can you turn amp models off in the GT-1000 in case you just wanted to use the effects and run it through a KAtana amp
@DaveWebbMusic
Жыл бұрын
Yeah man! kzread.info/dash/bejne/qp2cvLCYfJy7nbQ.html This is using the GT-1000 core, but it is exactly the same. I only have a Katana 50, but if you have a bigger model Katana, you can the fx loop as well 4 cable style.
@themomentkiller9167
Жыл бұрын
The GT1000 also has an output setting where you can select katana (among many other amps) either through the guitar input or effects loop, depending on how you want to connect. It EQs based on your selection. Sometimes I gig with a Jazz Chorus which I turn off amp sims and use effects only. Works great!
@JohnOShaughnessy
Жыл бұрын
yes, use the pedalboard option. Assuming you updated the software
@giorgosantoniou149511 ай бұрын
How many times does the same effect can be used?
@edwardszysorhans5736 ай бұрын
Okay so I've got my foot volume set up so that between 0 and 5 the tuner activates. So far so good. But when I activate the wah and I'm still getting the tuner between 0 and 5. How do I switch off that function when the wah is active?
@DaveWebbMusic
6 ай бұрын
I don’t think you can switch off the tuner option while doing that with the wah. I’ve found I need to either be very cautious with my foot to not engage the tuner, or just don’t use that option and have tuner elsewhere. It was too easy to go too far and have audio dropouts.
@edwardszysorhans573
6 ай бұрын
@@DaveWebbMusic dang it. If I figure out a way I'll get back to you. Thanks for the reply!
@yiannischartzoulakis10 ай бұрын
Hello! I want to ask 2 things about GT-1000. First, Im rarely using the bluetooth function, but yesterday when i was practising and I wanted to use metronome, i was trying to control the metronome via bluetooth and i coulnt see any choice that you could control it, even turn it on or off. Im the only one that cant use the metronome via bluetooth or its not an option at GT-1000? Second, Its really weird for me that i cant store 2 patches with different output select. For most of my patches i use the "Recording" OUTPUT, however I really love the cleans of the JC-120 with the output of JC-120 return (its a lot different than when i have the output on "recording") , but seems that i cant store it, as when i change the outpout , it goes for all the patches.. Is it strange that such expensive unit doesnt have this function or I am doing something wrong?
@DaveWebbMusic
10 ай бұрын
Hey dude. From what I can see, it doesn’t look like metronome is available on the Bluetooth app. So you will need to activate it on the unit. For the output select, if you choose anything other than LINE/PHONES or RECORDING, you are bypassing the Cab block in the GT1000. The amp name outputs, JC120, Katana, etc, are there for when using the GT1000 with that specific amp, whether it be into the input, return, 4 cable, or any other way I’m missing. This option is global by design in order to get the best tone in every situation & to avoid any accidental mishaps. I hope that helps. 🤘🏼
@yiannischartzoulakis
10 ай бұрын
Τhanks!
@professorbrain6425 Жыл бұрын
Where can I get this stand like you have for the GT-1000? I really need something like this as I have Cerebral Palsy and switching patches with my legs is a pain in the ass.
@DaveWebbMusic
Жыл бұрын
This is just a laptop stand from JB-HiFi. They’re easy to find, just do a Google search and you’ll find it. 🤘🏼
@justinTime077
11 ай бұрын
I was gonna say it looks like a laptop stand to me 😂
@jesterraj Жыл бұрын
What's the name of that pedal stand
@DaveWebbMusic
Жыл бұрын
It’s just a laptop stand. I found it in JB-HiFi
@WinItReignsАй бұрын
Do you like Silverchair?
@DaveWebbMusic
Ай бұрын
Yeah I do. I really enjoyed their Diorama album when it came out. It’s genius.
@WinItReigns
Ай бұрын
@@DaveWebbMusic you should do a video where you get their tones dialed in.
@DaveWebbMusic
Ай бұрын
I’d have to figure that out first 😅 but that’s a great idea! I’ll see what I can do.
@WinItReigns
Ай бұрын
@@DaveWebbMusic Ive been getting into these Boss GT1000 videos. I am awaiting the arrival of my by mail. Pretty excited. Daniel (Silverchair), has great tone variations throughout their career. Each album harnesses a different vibe, style and tone. Antways, Id like to see what you come up with. Either way, I like your channel. Rock On Blessings
@DaveWebbMusic
Ай бұрын
Thanks dude 🤘🏼
@clifforddang59479 ай бұрын
How did you get so knowledgeable with the GT1000?
@DaveWebbMusic
9 ай бұрын
Thanks man! I really appreciate that. Honest answer is, a tonne of trial and error! I’ve always wanted to get the best from the unit, because I genuinely love it. My goal here is to try to help others get the best from theirs without all the stuffing around. Thanks for watching, hope you’re enjoying the videos. 🤘🏼
@clifforddang5947
9 ай бұрын
@@DaveWebbMusic We thank people like you for doing the hard work ! I wish I can sit down with someone who's fluent on it and teach me the ins and outs. You have tone packs right? I'm gonna check them out.
@yavartambrchi5124 Жыл бұрын
Hi i tried to connect my gt1000 to speaker using trs cable but it sound strange and reverbi, is it because of the cable and should i use a Ts unbalanced cable instead?
@DaveWebbMusic
Жыл бұрын
Hmm that is strange. What kind of speaker are you connecting to? Have you had success with it in any other instances?
@yavartambrchi5124
Жыл бұрын
@@DaveWebbMusic its a Jbl partybox 110, i tried phone output with trs cable and it sounded very bad, then i changed to main mono output, now it sounds ok but still not the best
@JohnOShaughnessy
Жыл бұрын
@@yavartambrchi5124 if its line level, set the output to recording
@ShaighJosephson
9 ай бұрын
Because your speaker is line level snd the GT1000 outputs at amp/instrument level...
@ncurses Жыл бұрын
hey dave, have you tried using a MIDI controller using CC?
@DaveWebbMusic
Жыл бұрын
Yes, I use a Morningstar MC8 with my GT-1000 Core and it’s the best thing ever!
@ncurses
Жыл бұрын
@@DaveWebbMusic nice! Can you do a tutorial? Using on both PC and CC commands?
@DaveWebbMusic
Жыл бұрын
kzread.info/dash/bejne/fXmtwa6kk5vYYbw.html I have this video. But I can definitely do more and dive a little deeper.
@frankmonge9002 Жыл бұрын
Can you create patches?
@DaveWebbMusic
Жыл бұрын
I can and I do. There’s a link on this video to my Shop. I will uploading more patches in the near future. What are you after? I will try to accommodate.
Пікірлер: 65
tip number 4 is just perfect! solved the problem to switch solo button+wah at the same time ! this pedalboard its an insane versatility machine! thanks a lot you helped me out so much !
I have the Boss GX100. I absolutely love it. Tried the tonex with it, but the feel isn't the same. It's much easier to program as well.
I do like the C Num option on the Boss products. Boss ES-8 and MS-3 are great for that.
@DaveWebbMusic
Жыл бұрын
I haven’t used either of those. But an ES-8 is on my want list.
Awesome! Cheers from Portugal 🤘🍺🇵🇹
I found a guy on youtube that does a reverse noise gate (Higher Threshold, Low Release) will help cut the noise on high gain when not playing and automatically when playing which I found helpful in cleaning solos and when done the Threshold returns to a higher level to keep things quiet. I have a setting of a Threshold of 40 / Release of 8 on the block, in the Assign, Target Min 40/ Target Max 8, Source is Input level, mode is moment. I've also experimenting with Ducking on the Master Delay, turning the Master Delay on with my solo boost. Almost eliminates using reverb on my gain settings. Stereo tip was cool. Didnt know that turning on the FX Expansion killed the Stereo output, Good job!
@bingefeller
Жыл бұрын
That’s Jared Gunston, he’s great. He is a Boss South Africa demoer afaik
@waltscott6161
Жыл бұрын
@@bingefeller That noise suppression trick is awesome! I use it on 99% of my patches.
Great video mate. Thanks for that info !
Whenever I find a guitar channel that uploads in 60FPS, I sub. Amazing video.
@DaveWebbMusic
Жыл бұрын
I’ll take it! Thanks man.
Stereo - tip is cool! Will have to try. Thanks!
I had no idea the GTK could do this!!
Cool tips, thanks!
I was putting cabs/iRs after effects for the longest time, then finally realized that it was a big mistake... You want to effect the signal with the cabs/IRs up front before your effects, not after where your cabs/IRs can be negatively affected by effects such as reverb... You want reverb to effect your tone with your cabs/IRs already in it... Pretty simple to discern the difference by running a dry recorded loop through it both ways, recording them, and then comparing the recordings... Check it out for yourself...
@rorykhanmohon
9 ай бұрын
Took me way too long to realize this as well and yeah there’s a big difference.
I think is the other way around, GT-1000Core is full stereo functionality, thats why FX4 in mono wont make any sense, I still don't know any person that uses GT-1000core with the stereo input but is amazing, even if i add other effects that in the chain looks is hooked in mono, the stereo signal still works is amazing
Fast but a good segment.
Hey! Great video! Thank you so much! Do you think it’s possible to make all this with MIDI on a Core? I’m not sure if I could program the same CC# for more than one parameter change.
@DaveWebbMusic
Жыл бұрын
Thanks for watching dude. Oh yeah, it’s all totally doable on the GTCore. I have one as well, and the Core is exactly the same just smaller in size. I have a Morningstar MC8 and the Midi control is awesome. Basically everything you can do on the bigger unit can assigned on the Core to an external controller. 🤘🏼
how to i get the guitar sound coming trough both speakers it only comes trough one speaker
HI Dave ! than you buddy for your vid :)) im a super beginner with the GT , and i have a question please if i understood you well! at 1:46 , you mean you can change from the section A to B pressing the same switch ? ' 3 pacth for instance à . You mean that basically, you can have a set up of an am 5 section A ) switchable to the section B using the same swicth ? it is marvellous !!! than you for your reply,, and sorry my English is not that super good im Italian :)) !!ciao !!
@DaveWebbMusic
Жыл бұрын
Glad you’re enjoying the videos. Yep that’s right! You can find it in your assigns, it should say ‘Current Number’. Set it up as a toggle and you can back & forth between the 2.
@MrTyphoontyphoon
Жыл бұрын
@@DaveWebbMusic hey ! thank you very much buddy, grazie mille :)) sorry i explained it with a poor english but glad you got me , thank you very much i will try on my gt now :)))
Hi I just bought a GT 1000 and I'm trying to have the delay level or delay volume controlled by expression pedal one on my user patch not sure how to do that any help would be greatly appreciated thank you 🎸👍
@DaveWebbMusic
Жыл бұрын
Hey man! If you go to 9:44 I show you how to assign certain parameters to the expression pedal. Follow the steps but instead select the delay volume. Should work a treat. 🤘🏼
Is the overall sound similar to that of the Boss Katana?
Could you show me , how to do tip nr 1 , without pc or mac, just with the device
Question about this thing. Can you turn amp models off in the GT-1000 in case you just wanted to use the effects and run it through a KAtana amp
@DaveWebbMusic
Жыл бұрын
Yeah man! kzread.info/dash/bejne/qp2cvLCYfJy7nbQ.html This is using the GT-1000 core, but it is exactly the same. I only have a Katana 50, but if you have a bigger model Katana, you can the fx loop as well 4 cable style.
@themomentkiller9167
Жыл бұрын
The GT1000 also has an output setting where you can select katana (among many other amps) either through the guitar input or effects loop, depending on how you want to connect. It EQs based on your selection. Sometimes I gig with a Jazz Chorus which I turn off amp sims and use effects only. Works great!
@JohnOShaughnessy
Жыл бұрын
yes, use the pedalboard option. Assuming you updated the software
How many times does the same effect can be used?
Okay so I've got my foot volume set up so that between 0 and 5 the tuner activates. So far so good. But when I activate the wah and I'm still getting the tuner between 0 and 5. How do I switch off that function when the wah is active?
@DaveWebbMusic
6 ай бұрын
I don’t think you can switch off the tuner option while doing that with the wah. I’ve found I need to either be very cautious with my foot to not engage the tuner, or just don’t use that option and have tuner elsewhere. It was too easy to go too far and have audio dropouts.
@edwardszysorhans573
6 ай бұрын
@@DaveWebbMusic dang it. If I figure out a way I'll get back to you. Thanks for the reply!
Hello! I want to ask 2 things about GT-1000. First, Im rarely using the bluetooth function, but yesterday when i was practising and I wanted to use metronome, i was trying to control the metronome via bluetooth and i coulnt see any choice that you could control it, even turn it on or off. Im the only one that cant use the metronome via bluetooth or its not an option at GT-1000? Second, Its really weird for me that i cant store 2 patches with different output select. For most of my patches i use the "Recording" OUTPUT, however I really love the cleans of the JC-120 with the output of JC-120 return (its a lot different than when i have the output on "recording") , but seems that i cant store it, as when i change the outpout , it goes for all the patches.. Is it strange that such expensive unit doesnt have this function or I am doing something wrong?
@DaveWebbMusic
10 ай бұрын
Hey dude. From what I can see, it doesn’t look like metronome is available on the Bluetooth app. So you will need to activate it on the unit. For the output select, if you choose anything other than LINE/PHONES or RECORDING, you are bypassing the Cab block in the GT1000. The amp name outputs, JC120, Katana, etc, are there for when using the GT1000 with that specific amp, whether it be into the input, return, 4 cable, or any other way I’m missing. This option is global by design in order to get the best tone in every situation & to avoid any accidental mishaps. I hope that helps. 🤘🏼
@yiannischartzoulakis
10 ай бұрын
Τhanks!
Where can I get this stand like you have for the GT-1000? I really need something like this as I have Cerebral Palsy and switching patches with my legs is a pain in the ass.
@DaveWebbMusic
Жыл бұрын
This is just a laptop stand from JB-HiFi. They’re easy to find, just do a Google search and you’ll find it. 🤘🏼
@justinTime077
11 ай бұрын
I was gonna say it looks like a laptop stand to me 😂
What's the name of that pedal stand
@DaveWebbMusic
Жыл бұрын
It’s just a laptop stand. I found it in JB-HiFi
Do you like Silverchair?
@DaveWebbMusic
Ай бұрын
Yeah I do. I really enjoyed their Diorama album when it came out. It’s genius.
@WinItReigns
Ай бұрын
@@DaveWebbMusic you should do a video where you get their tones dialed in.
@DaveWebbMusic
Ай бұрын
I’d have to figure that out first 😅 but that’s a great idea! I’ll see what I can do.
@WinItReigns
Ай бұрын
@@DaveWebbMusic Ive been getting into these Boss GT1000 videos. I am awaiting the arrival of my by mail. Pretty excited. Daniel (Silverchair), has great tone variations throughout their career. Each album harnesses a different vibe, style and tone. Antways, Id like to see what you come up with. Either way, I like your channel. Rock On Blessings
@DaveWebbMusic
Ай бұрын
Thanks dude 🤘🏼
How did you get so knowledgeable with the GT1000?
@DaveWebbMusic
9 ай бұрын
Thanks man! I really appreciate that. Honest answer is, a tonne of trial and error! I’ve always wanted to get the best from the unit, because I genuinely love it. My goal here is to try to help others get the best from theirs without all the stuffing around. Thanks for watching, hope you’re enjoying the videos. 🤘🏼
@clifforddang5947
9 ай бұрын
@@DaveWebbMusic We thank people like you for doing the hard work ! I wish I can sit down with someone who's fluent on it and teach me the ins and outs. You have tone packs right? I'm gonna check them out.
Hi i tried to connect my gt1000 to speaker using trs cable but it sound strange and reverbi, is it because of the cable and should i use a Ts unbalanced cable instead?
@DaveWebbMusic
Жыл бұрын
Hmm that is strange. What kind of speaker are you connecting to? Have you had success with it in any other instances?
@yavartambrchi5124
Жыл бұрын
@@DaveWebbMusic its a Jbl partybox 110, i tried phone output with trs cable and it sounded very bad, then i changed to main mono output, now it sounds ok but still not the best
@JohnOShaughnessy
Жыл бұрын
@@yavartambrchi5124 if its line level, set the output to recording
@ShaighJosephson
9 ай бұрын
Because your speaker is line level snd the GT1000 outputs at amp/instrument level...
hey dave, have you tried using a MIDI controller using CC?
@DaveWebbMusic
Жыл бұрын
Yes, I use a Morningstar MC8 with my GT-1000 Core and it’s the best thing ever!
@ncurses
Жыл бұрын
@@DaveWebbMusic nice! Can you do a tutorial? Using on both PC and CC commands?
@DaveWebbMusic
Жыл бұрын
kzread.info/dash/bejne/fXmtwa6kk5vYYbw.html I have this video. But I can definitely do more and dive a little deeper.
Can you create patches?
@DaveWebbMusic
Жыл бұрын
I can and I do. There’s a link on this video to my Shop. I will uploading more patches in the near future. What are you after? I will try to accommodate.
@JohnOShaughnessy
Жыл бұрын
yes, for sure