I'm an old man at 44 yo. I've driven MANY a car. The E36 M3 is in my top 5 all time. At least top 5 of 6 cylinder models.

I 3d printed my cup holders

@phillipcarlson7071

3 жыл бұрын

Sell them shit I would buy

@LavendrHoney

3 жыл бұрын

No way how has it hold up after a couple years

So glad I found your channel, showing me everything I need to know about the e36 chassis. Can’t wait to keep working on mine. SUBSCRIBED!

@TreatsOnTheStreets

6 жыл бұрын

Welcome to the channel man!

Cut the bottom out of one of your cup holders. Cut it at that middle ridge that doesnt allow normal cups to fully sink in. It will fit a big gulp afterwards. #murica

@TreatsOnTheStreets

6 жыл бұрын

+Josh Tollefson haha that's a good idea. I don't know how I feel about having a hole through them though. Could look a bit janky... maybe not though!

@TreatsOnTheStreets

6 жыл бұрын

+Panagiotis Poulikogiannis seems to be the thing to do

swap out for a 95 center console. my cup holders actually work lmao.

@TreatsOnTheStreets

6 жыл бұрын

+GRENAgaDE I'll have to look into that!

You make excellent videos and I share your exact feelings!! And I even installed that center led for my after market alarm!

you will love the E39 M5 cup holders. .Lol .I had both the E36 M3 new and the E39 M5 ! i currently have a 2010 M6... Ps. No drinking or eating in M cars..

@andrewkoontz01

5 жыл бұрын

I got a 540 they make like 10 dollar replacement cup holders that are great

Try 255 square on 17x9 with a deep dish smaller diameter steering wheel & a -3 degrees of camber front -1.5 rear, keep toe at 0......completely transforms the driving feel, a lil twitchy but rotates like a dream

I think one of the things I hate about the E36 are the headliner and the window regulators, easy to replace but the door loiners are very delicate and usually require some kind of repair before putting them back on. Seen a lot of these cars in mt time. Working on them for 18 yrs

@TreatsOnTheStreets

6 жыл бұрын

+John Morris seems like you know your way around and E36

best handling car for its purpose andnot only...always felt quite responsive to me and yes i have tried the type-r and this seems more balanced...im curious though about this build...anyway nice video and yes the m3 is a better car than many...

3D print re: the cup holders. I don't have experience in 3D printing but it came to mind considering how it's a pop in pop out part.

My options were 350z and E36 as well.. Went with the e36 cause I got a really good deal on it so I went with it!

@TreatsOnTheStreets

6 жыл бұрын

+jdmfuentes awesome man!

@DomerSimpsn

6 жыл бұрын

Got the 350 and have no regrets

@LxTxSURGE

6 жыл бұрын

Have you come across any things you did not like ? Insurance price or high price repairs?

@TreatsOnTheStreets

6 жыл бұрын

I personally haven't had any major issues, and my insurance is 50 bucks a month

@gabriell04032

3 жыл бұрын

@@TreatsOnTheStreets Really late to this comment, you probably wont reply but its worth a shot. How old are you and where abouts do you live?

My 1993 318i E36 also has fixed non-adjustable steering wheel. I thougt it was because it is a cheap, basic trim level, but now I know that it's the same as in the M3, so that's actually a good thing, It has something in common with the M3 :D

CDV delete is a must. I used to feel like my clutch "got tired" when driving around town. We've chatted about this on Facebook, but you can source an E46 330 ZHP rack for around $150 from a salvage yard, and that will help your steering somewhat also. You could wait to find a Z4M Coupe rack, which is even faster, but they're quite rare. Finally, I'm expecting a 3D printed cup holder from a friend - I'll post some pictures on your FB page when I get it. I've seen good replacements once or twice, similar to E46 cup holders, but could never find them again when it was time to buy. Overall not a bad thing when you can fix most of your complaints!

@TreatsOnTheStreets

6 жыл бұрын

+Josh Mason yeah man once you get that holder you'll have to let me know! Thanks for all the info!

97 e36 328i owner. almost 270,000 miles on it.. daily driven. mine is a euro model. same useless cupholders and i use it to hold my house keys. steering wheel has tilt only, no telescopic. problem is.. once you've gotten the best position for your legs.. the steering wheel is too far away. My e36 definitely isn't the fastest car on the road, but it sure is the most fun to drive.

For cup holders. Use a hole saw to cut them out and buy the the illuminated cup holder on geek or wish and hot glue it down. I used some front junkyard to practice on

Gearbox wise, you can install a 6 speed from the e46 but you need to use a custom prop shaft. If you're really annoyed about he 5 spd, just look it up online, there's plenty of info on how to install a 6 spd. Btw, love your car! Also, about the steering rack, look up "purple rack retrofit" and also rubber doughnut delete. IIRC, there's a plug and play replacement thing from the e34 which deletes the rubber thingy for a solid aluminium part.

I just bought a mint e36 320i, first old BMW, I'm excited to work on it.

You could take a holesaw to the rim of the cupholder and have a stainless steel insert to slide in and secure with glue, that way you have a bigger holder and the stainless will look nice, have it powder-coated for better colors if you’d like too

Solution to clutch delay valve is to remove it. The steering rack might be slow, but you get good road feel through it.

I'm tall torso 6' flat. I love the seating position but, holy cow it can be a bit of a pain on longer drives. Corbuea seats have solved a bit of my head room issues. I actually like 5 speeds heh. Swap rear ends for more highway cruising friendliness.

@TreatsOnTheStreets

6 жыл бұрын

+Christopher Taft I'm long legs short torso. Bad combination for a good driving position lol.

1995 M3 Coupe here. NO Clutch Delay Valve baby...96'+ years only.

The cup holder in my 1996 works well enough. It’s just a single diameter and most cups and water bottles fit good and secure. Another person commented to get a cup holder from a ‘95. The one in my ‘96 is probably the same part.

There is cup holder rings that fit in your cup holder to hold better. My friends came with it but I've found them at the junk yard or even on ebay

I have a e36 M3 coupe as well. The cup holders are actually called can holders, and actually work well for that application. You should also be able to move your ash tray up in the console so the two holders can be side by side and hide neatly under your arm rest. Don't drive to often with a can, but they fit down low enough to be covered by the arm rest as well.

@TreatsOnTheStreets

6 жыл бұрын

+John Morris interesting! I didn't know that. Thanks for the input man!

@thirtysixnick5620

6 жыл бұрын

I've figured out that only cans fit so that actually makes sense!!! Even really long tall cans fit so I'm just going to start buying cans of things to drink when I'm just dying of thirst on longer drives. Anytime I get fast food I just ask for a drink holder (usually one designed for two) and set the single drink in the holder against the front passenger floor board haha

@TreatsOnTheStreets

6 жыл бұрын

+thirtysixnick haha nice man! I might have to start doing that.

youre awesome man. great content, subd.

@TreatsOnTheStreets

6 жыл бұрын

+Peter R. Thanks man! Welcome to the channel!

I’m also 6’4” and my 328i also has a fixed steering wheel. I know EXACTLY what you’re talking about!

The European spec cars came with more options, they wanted to sell it at a more competitive price in the US so a lot of options were lost. For instance a six speed manual, upgraded rear diff and upgraded breaks. The European spec cars were optioned with an adjustable wheel but only in height not length.

2:24 oh, you mean that 'sweet' 350Z with the dented in rear quarter panel ? ; P

No ones or nothing is perfect - this is as close to perfect a car can be :p, i would love a 6th though I suggest a BBTB, i just installed the riot racing one, is decent. It does need some adjustment with initial throttle actuation, however once it gets going the engine is much much more responsive, I am at 4th sometimes and it feels like I am in 5th.

Perhaps the cupholders from the e46 will work, i had in mine that where freaking awesome, wether a large soda or a small can of red bull

If I remember correctly, I think the obd1 cars have a different styling on the cup holders. It also has an insert for can. Not sure if they are removable or not, its been a while since I've stepped foot into my 95.

I have a Z3 rack, the difference is marginal at best. Real solution is 1: get a square wheel setup. The stagger looks amazing but makes it feel like shit. 2: I'm told you can use a Z4 M coupe steering rack and pinion unit and it will feel like a brand new car.

@yahtadi5152

6 жыл бұрын

nojapshit just the information i am looking for. I got another one. I am about to go to get one of these, but i wanted in auto trans Since E36 M3 with SMG is kinda rare. Do you have any swap information about what is the best auto trans for E36 M3 ? Thanks in advance

@themogget8808

6 жыл бұрын

The best auto trans for the E36 is the manual. Just do it. Square tires, new steering rack.

Try and find the Origin Equipment cup holder. Got it for my e36 a year or two back and it is by far my favorite upgrade for the e36. Only problem is they seemed to vanish but worth a shot finding a used one

To fit your legs better and still be able to reach the steering wheel good, you have to incline your seat back up. Like me you probably recline your seat back. Try to find a balance of sliding your entire seat back and play around with the recline/incline... or just buy a new seat that bolt straight to the floor board. Set it up for you and only you and bolt her down. This will give you more head room. I do this is race cars.

Use cut off wheel to cup holder is what I did 😂😂

I've had the same cup holder issue . To solve my problem I put a koozie on everything and it's rides stable . Keeps your drinks cold and actually keeps the drink sweat from dripping though those stupid teeth in the bottom and shorting out those stupid little light bulbs .

Add the trunk latch tend to bend and crack making the trunk not work. Its been a common issue on my E36s

I know I'm late to the show, but I cut away the bottom of the cup holder with my Dremel plastic blade. I had to also cut away some of the console on both side so a simple can of soda or a bottle of water would fit. My next plan is to find a black plastic cup and use the bottom of it to glue onto the remaining top half of the cup holder. I also notice my coin holder didn't hold nickels. Not sure if maybe the car was made for Germain coins instead.

Hey I pulled a centre console out of a 325i at the junkyard. It was all one unit, two cup holders and a change holder. Check out some early model non-m's

@TreatsOnTheStreets

6 жыл бұрын

+Kevin Graham I'll have to look into that! You're actually the second person to suggest it so must be legit!

3D print a new cupholder! When I get my 328i in a few days, I'll model one!

@solereeper3955

3 жыл бұрын

Did you end up modeling it yet? A good 3D model seems like our best bet here

@robertpuckett7412

3 жыл бұрын

@@solereeper3955 I didn't have to!! There's a few on thingiverse. I haven't gotten around to printing one yet, but I will soon!

@LavendrHoney

3 жыл бұрын

Was it printed?

You said you were new to RWD? Damn man does that wheel control say otherwise 👍🏻👍🏻

@TreatsOnTheStreets

6 жыл бұрын

+Alex Brown haha thanks man! Luckily I live where there's snow so I've had good opportunities to slide around in various cars quite a bit.

The solution for your position on your car pass for buying an after marker deep dish steering wheel... i know that its not OEM, but you can find prettys ones out there

Hey man love your videos! Any way I could get featured in your related feature channels tab? i have a small channel but it it is growing and could definitely use a little help in the exposure area! Btw i have you featured already so keep up the good work!

@TreatsOnTheStreets

6 жыл бұрын

+Bimmer Dude hey! Yeah I think I've seen one of your install videos before. To be honest, I'm not even sure what/where that is. I just make videos lol. Not too educated on the technical side of it all. I'll have to look into it though and figure it out! Keep it up!

@BimmerDude

6 жыл бұрын

haha no worries man! and thank you!

Maybe heat it up a little and put a can in and try to get the bottom indent to form around the can which should make it wide enough

You still need a cupholder upgrade? There are a few designs people have don't for 3D printers. I'm thinking about printing one off for my E36 convertible. Also going to replace all the plastic covers missing in my car.

I just got a dash mount one and mounted it there

Make a cup holder out of fiber glass 🤙

You could get a 3D printed one. I've printed some minor interior stuff for my vw jetta and they come out good

@tabryis

4 жыл бұрын

I was just gonna suggest this

Just buy a euro spec cup holder I found one for $91 that fits the e36 m3 but I believe it depends on the year

Cup holders? You mean coin holders right? They work awesome for holding your change from the drive thru! LOL

@TreatsOnTheStreets

5 жыл бұрын

😂

The rear cupholder in my 95 M3 fits cans and fast food cups perfectly, the front one is as worthless as yours.

You know, the cupholder problem ... there's a solution, which was tested long time before. Press brake, enter a bar, shop, whatever, drink, then get into your car.

I got my 323i vert for 2k and its clean

Love my boosted g35 coupe However, I've always wanted an e36 or e46 m3... maybe I'll pick one up as a daily/project Nice video as well!

@TreatsOnTheStreets

6 жыл бұрын

+4feeterszwagier fun car! Yeah, with either of the bimmers I think you'd definitely enjoy them as well. Thanks for watching!

@asianprodigyproductions5477

5 жыл бұрын

I know this is a year old but Do it!!! I also own a low mileage G35 Coupe and I’m doing full bolt ons. I also just picked up a e36 328i with 171k miles on it and it’s in really rough shape, but it’s a fun car and I’m turning it into my ultimate daily/ project car.

At 7:00 the 12v adapter port has a sad face.

You would have hated the 1 cupholder in the 350z even more hahah 😂🤣 if it wasnt broken to begin with

After watching you video, my advice would be by a nice daily driver and a sports car. You can't have it all if you are on a budget.

I have a 92 M3 sedan cherry red

Ok. I’m new here. But that sounded amazing. What engine and exhaust have you put in that 36?

@TreatsOnTheStreets

6 жыл бұрын

+Waddles engine is the same one the came in the car stock. It has a Dinan intake and exhaust though! Thanks for watching!

@waddles543

6 жыл бұрын

Treats On The Streets awesome! I’ll look into that intake and exhaust for my m3!

Talk to someone with a 3D printer and give them the cup holder. Then they can make you one that will fit a cup properly !

You can 3d print a cup holder

Cut out the last ring of the cupholder and just Do some fabricating

S52 ftw!

@TreatsOnTheStreets

6 жыл бұрын

+Basile Bishop haha that's right!

My e92 m3 in 7th gear is sitting at 3500 ish. Talk about great gas mileage.

I've been following your channel for a while and really enjoy your videos. I've noticed in some of your shots that you have a gauge pack in the little storage slot near the shifter. Where did you get that and what gauge's are included? Might make a good video (maybe you already did one and I haven't found it yet...).

@TreatsOnTheStreets

6 жыл бұрын

Hey man, thanks for being a part of the channel. I've mentioned it a few times in fandom videos. They're VDO gauges. They came already in the car when I bought it so I can't tell you where to get them, but a Google Search should come up with what you need. The 3 I have are voltage, oil pressure, and oil temp. VDO actually supplied OEM gauges for BMW in a few cars like the z3 m, so the color and font is an exact match for the gauges in the cluster.

@petea592

6 жыл бұрын

OK, thanks. If I figure out where I can get them, I will put a post up.

@petea592

6 жыл бұрын

Hey, I found the gauge cluster, here's the link www.leatherz.com/collections/armrests/products/mark2-armrest-with-2-cupholder-base (and while you are there, you check out their fix for one of your 'hates'--the cupholders). Looks like they figured out a better mousetrap. Check out their Mark 2 armrest with improved cupholders and storage. Pricey, but looks like they will address your concern... I think I am going to go for the gauges with oil pressure, temp and water temp gauges. How do you like the ones you have?

@TreatsOnTheStreets

6 жыл бұрын

Thanks for posting that man. I like the gauges I have now, but I do want a more accurate water temp gauge than the oem one in the cluster.

@petea592

6 жыл бұрын

Check out their site. The one I am going to buy is the one that has a water temp gauge (seems like a more critical E36 with the cooling system issues... You could probably just buy the water temp sending unit and gauge and take out the voltmeter...

I can likely CAD and 3d print a cup holder, but i will need to know the dimensions

When my car grows up it wants to be just like yours

@TreatsOnTheStreets

6 жыл бұрын

😂👍

I have a 1998 328is, hate the cup holders too, I use them for change. The fixed steering wheel is something that German's thought was the perfect position, they say you should adjust your seat accordingly. I disagree with that concept and BMW has changed it since, people of different body types need to tilt it differently. If a person is really tall like you are, not ideal, or if you are short like me, I had to raise the seat up and forward, still the steering wheel was too far tilted forward. I like the steering wheel just slightly tilted, almost no tilt. That sloppy steering has an issue IMO, there is no way there should be that much play in the steering. Mine isn't even an M3 and it turns on a dime, I'm not sure what year yours is, maybe in 1998 they improved it. Beautiful car though, I am selling mine as we speak and I am going to miss it..timeless car. I got a 2015 328i, and I honestly like the old E36 look better. 225k on it, got tired of stuff breaking, time to move on. Probably worth practically nothing, only thing it has going for it is it is a 328i sport 2 door, which you can't find anywhere, they just didn't make a whole lot of them. One thing that is really impressing about the 2015 328i is the N20 engine they put in them. Not bad turbo lag, but I hate the steering...they completely numbed it down. I had a loaner 2019 328i and the steering on it was drastically better. So in 2020, it's probably back to where it should be. No 328i anymore in 2020, just the 330i.

Height issue isn’t valid since in a 350z u won’t have a place at all since no space at all and getting a detachable steering wheel might help, I’m 6,1 and used to love 350z until I sat in one. Still love it it’s just not much space, at least the m3 has 5 seats haha

@Pattyinthewoods

6 жыл бұрын

Never mind at end you brought the steering wheel up haha

Drifts nice

@TreatsOnTheStreets

6 жыл бұрын

+PDX DAT sure does!

3d printing will solve your cup holder problem

The cup holders only hold red bull cans lol

@TreatsOnTheStreets

6 жыл бұрын

+Matt Byerly looks like I need to start drinking more red bull...

Hey treats on the streets, I noticed you have a little dial near your shifter and I was gonna ask what does yours do? I have one very similar and it's next to my lights and I have no idea what it's for

@TreatsOnTheStreets

3 жыл бұрын

It was for the sub woofer that I took out because I never listen to music in that car

@loganhecker5450

3 жыл бұрын

@@TreatsOnTheStreets o nice, mine was already there when I bought mine and it makes all my gauges go nuts idk what it does. I can try sending u a video on how it works

My 328i has completely different center area thing. I also know that you can take that peice out. Maybe get a 328 one???

@TreatsOnTheStreets

6 жыл бұрын

+Cordell Ruzewski I have a buddy with a 328. I'll have to check his out!

@ashman0071

6 жыл бұрын

he's put an aftermarket gauge cluster in the area you put your sunglasses ........

I’m 6’6 and fit fine🤷🏼‍♂️

i have a 3d printed cup holder lmao

American small cups is European large. Medium is 33cl here.

That steering speed is odd... My 1991 325i E36 seems much better than that? I wonder if that's another U.S E36 thing? I'm in Australia in case you're wondering about the 91' E36 :P

@camerontam7784

6 жыл бұрын

Sean Kretschmann 325i used the Getrag transmission. All US e36m3 uses a ZF tranny. The ratios are a little off since the Getrag in your 325i 5spd has an overdrive

in europ we all complain about your luxery interiour...and we all want us bumpers lol here we dont even have cupholders in most e36

In order of hate(=P): 1 - Dig through bimmerforums. Someone is working on a 3D printed solution. 2 - Only the 94 325 came with a tilt wheel . You can retrofit this but it requires you to change out quite a bit including the shaft. For a list of what you need look up a 94 325i on realoem.com 3 - Well, you're already taking care of that. 4 - CDV is definitely dumb. I also plan on getting rid of mine soon. 5 - Swap in a Z3, E46 ZHP, or E46 330i steering rack. Direct swap and faster. A smaller wheel will reduce the amount your arms have to move but the turn ratio is still the same regardless. In other words you'll still end up having to turn the wheel the same amount, it'll just feel different. Perhaps a little tougher due to smaller radius.

@akakiki4111

6 жыл бұрын

LockDots my 95 325ic has a tilt wheel

@TreatsOnTheStreets

6 жыл бұрын

+WreckLesz BeamerZ lucky!

@akakiki4111

6 жыл бұрын

Treats On The Streets lol I know! My first e36 98 323is didn’t have it I thought it was so weird that any e36 cake equipped with one.

@LockDots84

6 жыл бұрын

It was mainly available in 94 but, some early 95's got it as well.

@williamherron9365

6 жыл бұрын

LockDots my 92 325is has a tilt column

could do a euro delete on the cup holder all together

@TreatsOnTheStreets

6 жыл бұрын

+Burnout Beats Productions I guess that's another option!

Join the e36 army group on fb. There is a guy that 3d prints cup holders that can actually hold a cup.

@TreatsOnTheStreets

6 жыл бұрын

+William Herron I'll have to check it out!

you drive my dream car

@TreatsOnTheStreets

6 жыл бұрын

Haha it's been pretty awesome!

@liderhardware1829

6 жыл бұрын

haha I live in Bosnia E36 M3 best car ever of course for me. Enjoy E36 M3

sounds like you would have to 3D Print your own cup holders

Why would you need a cup holder on an M3?

I have a similar problem with regards to height - I am 6'2 and I have an e46.. however the problem is that my legs are actually longer than average, compared to the length of my arms, which means my knees sit just s high as yours and my arms are still a bit too stretched out :(.

@TreatsOnTheStreets

6 жыл бұрын

Tall people problems.... haha. The struggle is real.

mine tilts but sadly is not "telescopic"

the main thing i hate about th7s e36 is the seat, no support for your neck and head , it is a huge risk.

My solution to the janky cupholder / coin dispenser / ashtray thing was to just replace it with a non-armrest console- which deletes the whole thing altogether. My main reason was that the armrest position wasn't comfortable for me and I really hated the whole cupholder setup. For me it seemed to cheapen the interior and looked like it was just tacked on for US buyers. I think the non-armrest console was from a 318i? Can't remember, its been a while but I got it used on ebay. It was a pretty simple job to change it but if I recall I needed to get a small bracket from bmw to attach it properly under the ashtray at the rear of it. It can occasionally be a pain not having a cupholder at all, but I don't drink in the car much so it's not a huge deal for me. Looks like this www.dropbox.com/s/4rquvw12yrvh5uk/M3center_console.jpg?dl=0 PS great videos, keep it up! I dig that deep front lip you got, think I'll pick one up..

@TreatsOnTheStreets

6 жыл бұрын

Oh cool man! I've seen those before and thought about doing it. Maybe that's what I'll end up with.

@mattpolhamus9194

6 жыл бұрын

Don't see a black one at the moment but here's a beige listing.. www.ebay.com/itm/51-16-8-162-673-Center-Console-E36-BMW-Beige-/172724745160?_trksid=p2385738.m4383.l4275.c10

@mattpolhamus9194

6 жыл бұрын

forgot to mention the cubby at the front (in my picture) is a separate part that snaps in.. you can see in the ebay listing there's holes for mounting

My 95 M3 has a tilt wheel

@TreatsOnTheStreets

6 жыл бұрын

+benvidproductions yes, thanks for the mention. I should have mentioned that the option for a tilt wheel was killed in 96 when the m3 went to a 3.2 liter.

@vitaliynikityuk8983

6 жыл бұрын

same

@camerontam7784

6 жыл бұрын

benvidproductions i have a 8/94 production month 95 m3 and it does not have the tilt wheel. Maybe because I have the lux package? Oh well..

@adamwest9910

6 жыл бұрын

Treats On The Streets my 1998 e36 had a tilted steering wheel but not a singe cupholder.

@TreatsOnTheStreets

6 жыл бұрын

Haha looks like you can't win them all. Jealous of the tilt wheel though!

how much will you sell or old s52 once you swap to the s54

@TreatsOnTheStreets

6 жыл бұрын

+Paul Morris I'm not swapping an s54, just the 6 speed transmission from an e46. It will work with the s52.

My euro 318i Exklusiv Edition has a tilt wheel. ;)

@TreatsOnTheStreets

6 жыл бұрын

+Matt Foster kiiina jealous

@m.foster7860

6 жыл бұрын

kiiina jealous of your s50 tho... ;)

@TreatsOnTheStreets

6 жыл бұрын

+Matt Foster love the s50/s52!

S2000 the only other car you listed worth being compared to this future classic

The cup holder issue could be solved by simply measuring the existing one, 3d modeling an ideal version, and 3d printing with an abs plastic. If you want it to look nicer, just a little bit of sanding, primer, and paint and you’ll be ready to party.

What are the risk of removing the clutch delay valve??? I’m looking to remove it and need to know because it’s so annoying in my opinion!

@TreatsOnTheStreets

6 жыл бұрын

+Daisuke's just more driveline shock. Greater risk of transmission damage from popping the clutch.

@sal1520

6 жыл бұрын

Thank you . And I’m always waiting for new videos 👍🏼

@stevengregory8360

6 жыл бұрын

I've removed mine a couple years ago. I rarely drive it as hard as Treat does, but have had no issues thus far.

Hi man, Im as tall as you are, do you know if you can fit in a z4 (e85)

@TreatsOnTheStreets

6 жыл бұрын

I've never been in one before. I'd imagine you can, just might be a tight fit. I've owned smaller fitting cars before like a mazdaspeed3 and it wasn't that bad

I use the space in between the seat and the belt buckle for my drinks. It works perfect.

@TreatsOnTheStreets

6 жыл бұрын

+Dimitri Nakos haha thanks for the tip I will have to try that.

Sand the edges of the cup holder down

You can make you're own cup holders my brother in law made custom cup holder for my e36 there not that hard to make

@TreatsOnTheStreets

6 жыл бұрын

+Daniel Salas how did he do it?