I work in a sheet metal fabrication mill and we are required to use cut resistant sleeves because we slide large thin sheets of metal. The sleeves save my arms almost everyday.

@Buchaven959

4 жыл бұрын

Yup, same. Kevlar gloves and sleeves mean I have ten finger still.

@shadwell749

4 жыл бұрын

We just got some new ones at the shop and these new ones are junk.They are super thin unluke the older ones

@ILoveCats208

4 жыл бұрын

Stay safe.

@muhammadazaim6962

4 жыл бұрын

What you mean by almost 😟

@rumplestiltskin1350

4 жыл бұрын

Glazing trade aswell

When he tested cut resistant sleeves, my anxiety went 📈

@D3MONFIEND

4 жыл бұрын

STRONK

@drifterafloat

4 жыл бұрын

We used cut-resistant sleeves like that when working around lots of sheet metal and large panes of glass like in the window shop. Saved a lot of people's arms from getting sliced open. it is also useful in meat processing because there aren't there are knives flailing all over the place in the processing plant.

@PT-mj3bk

4 жыл бұрын

D3MONFIEND STINKS :-( 📉

@darkness_gaming6018

4 жыл бұрын

Yep same.

@Nate-bf7ou

4 жыл бұрын

exactly

"Here goes nothing." *Tries it and cuts his hand off* "Oh well here goes my hand."

@tsudonn

4 жыл бұрын

**puts on a new hand**

@muhammadusmanrafique3517

4 жыл бұрын

Hey what's up guys today I am gonna use some hand replacement gagets

@evilh0mer23

4 жыл бұрын

boom, I just cut my hand off

@camogrrl

4 жыл бұрын

You mean boom! There goes my hand....

@daviddining5192

3 жыл бұрын

BOOM

The sleeves are for ppl who work with metal sheeting and tin rooms and I work in the refinery and insulators use them

@danahamelinproductions9224

4 жыл бұрын

They might also be used in printing and corrugated cardboard manufacturing for paper cut resistance

@felixdelabarara494

4 жыл бұрын

Definitely. Just imagine your arm clipping stacked aluminum sheets as you walk between rows.

@MyGir12

4 жыл бұрын

yea i work in a factory that deals in making car doors and its mandatory we wear the sleeves as its to protect us from any sharp ends of the metals we use

IDK why but, CrazyRussianHacker and quarantine goes really well together hahaha

@paulpagani182

3 жыл бұрын

I agree with you .

Uh yeah I probably would have tried those cut resistant sleeves OFF my arm first.

@icusawme2

4 жыл бұрын

That's one of the reasons he's called Crazy! haha

@babybiscuit11

4 жыл бұрын

Hes russian, that knife couldnt cut him anyway, he would just cut the knife, the sleeves arent for him, its to protect the knife.

@PerfectBiteHQ

4 жыл бұрын

babybiscuit11 he is the Russian Chuck Norris!

@michaelalfandary1643

4 жыл бұрын

What do you expect from a guy making KZread videos

@harryscity5605

4 жыл бұрын

@@babybiscuit11 5yy67hh

You can put it on low, or use the rocket engine function

Whenever he couldn't get the gas can to lock in I had flashbacks of the exploding mini camp stove

@death1305sam

4 жыл бұрын

You had togo there thanks for the flashbacks

@jim8432

4 жыл бұрын

Did the same

@drajatdiky

4 жыл бұрын

Which video?

@los_gas

4 жыл бұрын

whats the video called??

@Theserjtankianfan

4 жыл бұрын

Loš Gas I think it was a personal experience.

Mom: What are you watching? Me: A Russian guy trying to cut his arms.

@xjallows5388

4 жыл бұрын

Reiner Braun what it say before edited

@Tamnd605

4 жыл бұрын

@@xjallows5388 it said tryying

@xjallows5388

4 жыл бұрын

Bread Emoji alr cool

cut resistant and cut proof are way different .

@Aware_of_myshelf

4 жыл бұрын

Thank you. I was scrolling through the comments hoping someone would say it before I did..

You have to push and twist the gas bottle on te stove, then locks in

"if You can light dry grass you can pretty mutch lite anything on fire" Taras Kul 2020

Taras: *has razor sharp knife and cut resistant sleeves* Also Taras: *decides to test the sleeves on paper AFTER testing on his arm

We wear them at work making cars, especially in the body shop when handling raw sheet metal parts

2:39 that would be the coolest iron man hand arc reactor thing

Been following you since almost the very beginning. I love watching every one of your videos! Keep up the great work!

@rafaelrostek4003

4 жыл бұрын

Me too I loved his videos back than, but I love that he is still the same

5:10 taras.exe has stopped working 🤣🤣

Also, it helps you to protect your hands underneath gloves when you working with sheet metal. If you ever worked with ventilation ducts oh, there are super Sharp. So, I hope that answers your question

My girlfriend used to work in a place where they made glass and she had to use the cut resistant sleeves

@lllz9800

4 жыл бұрын

Your 'imaginary gf' might wanna say

@maximilianpetrov8176

4 жыл бұрын

НЕLLЯАlZΞЯ bruh what

@xEstrangHero

4 жыл бұрын

Left or right?

Sleeves like that are used by manufactures to prevent injuries on assembly lines or parts manufacture and welding. Car parts stamping, anything that is hot....machinery operations....stuff like that.

“Looks like a big torpeeno” 🤣🤣🤣

Me at home: bored because of quarantine Taras at bome: getting ready for zombie apocalypse

i was waiting for him to take the sleeves off and blood just start leaking loll

Dude is getting nuts with these re-uploads.

I love survival stuff and i love the survival series keep it up

Velkum beck to my lavatory we're seeftee is nambuh vun pree-or-itee! (sigh, I miss this)

We use the sleeves when working in the ceilings, pulling cables and such, lots of sharp edges on cable trays and metal structures and even sharply cut cable ties can easily cut you.

*

@lllz9800

4 жыл бұрын

Actually *"boom"* is

@mrbeast5740

3 жыл бұрын

@@lllz9800 actually "wooaoh it cut agaian" is

I‘m really missing „ Security is our one priority “😢

Industrial protective sleeves is my go to in a survival situation. Lazy Russian Hacker making a new video from previously put to the test items

Motorcycle instructors say "the price of the helmet is the price of your head." That sharps-resist sleeve looks like a poor trade.

*starts cutting arms* Me: ok cool *turns are around for split second to cut veins* My emo ex gf: same

I used to work in a glass factory and we were required to wear similar sleeves

LOL, 4:37 “SAFETY #1 PRIORITY” 🤣

@tylerb1305

4 жыл бұрын

I’m kinda scared to do this

I was holding that lighter in my hand when you were testing it. Its great.

Look forward to taste testing with the outdoor cooking gadget.

6:44 is that amazed ghost !!!

@jristheb3astgarica973

4 жыл бұрын

Haha

@divineblessing5712

3 жыл бұрын

What seriously 😂😂🤣🤣🤣

Imagine if that sleeves ended up being one of his fails on his arm🙃

we use that type of sleeves for handling glass and sharp metals where i work

The butane can does lock in the stove if you turn it, it will lock into place.

@realsteel85

4 жыл бұрын

Do you know what that stove is called?

@jefflatham3247

4 жыл бұрын

@@realsteel85 snow peak.

@jimjones5530

4 жыл бұрын

@@jefflatham3247 thanks!

Had them gloves in a place I worked cutting open boxes with a knife, somehow ended up cutting my arm and needing around 15 stitches 😂

4:18 we should see a whole vid w/ just Taras cutting stuf with the sharp knife like that :P

Kevlar sleeves, we use them in BMW's press shop to protect against cuts when handling sharp sheet metal and panels.

your going to have to start a museum with crazy gadgets and stuff someday. ha

I wonder if that sleeve thing would help us in the fiber glass industry

Love your videos

We wore those sleeves in a factory that produced metal products from giant stamps. They protected against all the the sharp burrs that the freshly stamped parts had.

Roll up in the club, wearing nothing but welding pants and cut resistant sleeves

Am I the only one thinking that stove as arc reactor from iron man xdd

Going over the instructions would be awwesoome.

His Survival gadgets are gonna help us in Covid 19 pandemic

When I was working in a glass factory we had to use those to protect our arms from large shards of glass

Those arms socks looks like they'd be good in a sword fight

Great burner the first one, like that

I'm a window Glazier. Which means I work with large pieces of thin glass and mirror. These things with definitely MINIMIZE the effects of sharp glass hitting your arms. I've had stitches 3 times on my arms and once on my leg. I use those sleeves now.

curious if those cut resistant gloves would be good if gardening (&trimming) around bushes with thorns...like bougainvillea's? Am always getting my arms cut.

Glass production makes good use of the sleeves.

Some companies require an employee who uses a box cutter as a regular tool to wear the long cut resistant gloves.

Maybe zombie apoclypse hahahaha

My blood pressure went up when he test the sleeves!

@darthchop697

4 жыл бұрын

*When he put the sleeves to the test.

I use the cut resistant arm sleeves while working with sheet metal or building cars. I also use them when climbing trees for trimming.

Emos be like... 4:29

@ktprojects2077

4 жыл бұрын

😂

"Very very sharp knife, here goes nothing." *Proceeds to knife wrist*

Very Cool 😎 Spasiba for sharing.

I love you man. Happy holidays.

Disposable Aluminum is cheaper than paying that dishwasher at the banquet center to wash pans

I had to wear those sleeves when I was working with sheet metal. It's very easy to get hundreds of cuts on your arms in a second when you are moving A/C cooling fins off of a stamping press.

your every videos is BOOM BOOM BOOM

He put a little too much trust in those sleeves

1:49 "wow looks like a big torpino right here"

@tylerb1305

4 жыл бұрын

A big torbino

We use those sleeves and body shop when we build cars cuz of the sheet because of the metal is sharp edge

I have seen that cut resistance material in a few other videos and they always get through, although they always have a hard surface on the other side. I wonder if they would preform better with a soft surface behind them like flesh.

I know quite a few factories I've worked in made us wear those kevlar protective sleeves. They're quite common here in Canada for the automotive industry.

1:48 wow looks like a big tourpeeno over here

Love your videos~

I wonder if that's a safety feature to detatch the fuel source on that first stove

The sleeves are used for steel industry we used them at my job we processed coils into usable sheets from thin gauge to heavy gauge keeps yea from getting cut

Cut resistant sleeves: I work with metal and we use these sleeves every day. When the metal is 12ft long you need two people holding it, one on each end and holding like this can cause the sharp end of the metal to rub against your wrist or arms.

Upps. Love your videos...

Keep it simple use the stacking rock method!!!!!! Lol love the stream though

They do make chainmail sleeves which are even stronger and would hold up to you slicing on a piece of wood like you did and also fairly stab-resistant. Because it's chain mail

Nice's opening for your new videos

The cut resistant sleeves are for having knife fights in the hood. C'Mon man!

the cut resistant sleeves would be good for construction work like sheet metal rebar or flashing, as well as on a slaughter line perhaps.

I use these when I work at my job, I work at a bread factory and we have to pull hot pans off the line. You'd be surprised at how easily you get burned. Pair these with heat resistant gloves and you're good to go.

You already did review of this collapsible thing

@jimjones5530

4 жыл бұрын

What is it called?

The sleaves may be good for Saturday night knife fights.

The best use for the cut resistant sleeves I think would definitely be for butchers. P.s. ALL are great gadgiks in this video. Tq Taras, really Kul. 😎

Havent watcht yet but gonna enjoy

I work in construction and I've been required to wear cut resistant sleeves and gloves whenever working with glass, sheet metal or tying rebar because of the potential of a wire poke.

Those sleeves would be great for clearing blackberry bushes

Actually the knife was scared of him

you mean 5 gadgets I already reviewed and stuck into a compilation video.

I like how he buy stuffs sometimes without knowing what it is used for 😂

Keep up with the hard work 👍

We used the Cut proof sleeves when I worked in a steel mill where we handled sharp metal all day so we wouldn’t cut arms

The cut resistant sleeves are what we had to wear at this sheet metal cutting facility I worked at so we wouldn't slice our arms with giant sheets of stainless and aluminum.

I work in a mirror fabrication factory and the cut resistant sleeves are very usefull to manipulate glass without any risk of being cut.

You're lucky those cut resistant gauntlets worked when you were wearing it, or else this video would be called; "a gadget that sent me to the hospital."

Where can I find that little stove... I need it for work