I find that a REALLY good tip is to let the pros mess it up first, and learn from their mistakes.

I just retired from the Army Special Forces. Ive watched pretty much every video you guys have put out. I just wanted to let you guys know what any inspiration you've been to my woodworking. Thank for all the badass videos you put out. You're videos have helped me become a better craftsman. I look forward to your future content. STAY SQUARELY!!!

Thank you for your continued quality content. I appreciate your honest presentations, especially mistakes you've learned from along the way. I especially appreciated the last bonus tip about liquid vs. powder pigment. That was something I was not aware of, and something I will not forget.

I love it when tips are big and thick.

Great compilation. Just a little addition on the pigment stuff, for liquid colorants there are color pastes and inks. Color pastes are pigments suspended in an oil wich makes for a better mixing and you don't get any lumps or clusters of pigments. And inkts or tints are liquid colorants without pigments or really really fine pigments, those can move into the wood. You can also make your own color pastes from your pigments if you have issues with lumps. Or you premix the pigments in the resin part before adding the hardener, so you get all the time you need to properly mix the pigments in.

love your content John and team keep it up!

You guys could always ask me for epoxy tips!!! 😂 j/k great content broham!

I’ve used Pam for years on fiberglass molds and it works great 👍.

Great video! I've worked with epoxy for over three year now and, like you, have learned some painful lessons. Bonus tip #...lost track: HAND MIX DEEP POUR EPOXY. This will eliminate 90% of the bubbles. Power mixers entrain air into the mix. All other bubbles will rise to the surface when done correctly.

Excellent video as always. Well presented and clearly explained, good sense of humor and no annoying music. Keep em coming.

Great content. Regarding the silicone drying issue you have had in the past, you need to pay attention to two factors: First is Tack time / Skin Time, this is generally the short time i.e. 30 minutes (marketing "rain ready in 30 mins") but watch for the "full cure time" which is usually 12-24 hours.

Great video and awesome tips. Thank you so much for sharing John.

Great informative vid John. Thanks.

@bg2608ret

2 жыл бұрын

Agreed

For with the live edge. If there's bark involved, Total Boat has a Penetrating Epoxy that helps seal it on, before the *normal* epoxy is applied.

You're a book of knowledge when it comes to wood working. Love the information

Thanks for all the great tips!

This man knows his stuff!! hey helped me with my first ever pour when I was making my floating desk!! Love your vids brother keep up the awesome vids!

Great tips, John! Can't wait to see you use these tips in your upcoming projects!

I've used micah powder pigment and it has also bled into the wood. If you don't want it to bleed, do a thin coat of clear epoxy around where you are pouring. Like Blacktail Studios does.

I love very much how you teach products and everything.

Thank you for all the tips. You really help me begin my project.

Great job!! Thank you

Good info john.ty

Awesome build crew 🤘

Valuable tips🖤 Cheers🍻

Solid tips guys! I think I watched your last epoxy tips video like 4 or 5 times before I filmed my live-edge modern tv-stand pour. Almost positive those tips saved my bacon haha

Great work, I have been wanting to do a pour for my desk forever and have chickened out every time. I did just a top clear coat, which looks great, but it's not what I wanted to do. Your tips are going to help me try to actually do it this time, lol. It doesn't help that I managed to screw up a 1:1 mix the first time. I grabbed the clear coat twice and no hardener, I got a little distracted, but should have been more careful. That is almost impossible to clean up and takes FOREVER to dry with no hardener. Ugh. I love the things you can do with epoxy though.

Thanks!

If it matters, I best enjoy the informative/ educational videos! Great video! I’d like to see more of these

Fantastic tips, John! Thanks a lot! 😃 Stay safe there with your family! 🖖😊

Level, level, level your project!

Hey John. Can you make a video on liquid pigment vs dry pigment. Would love to know more of your hypothesis

Let’s go Pens!!!! That’s friggin awesome!

I would love it if you made a video using Purple Heart or just an exotic beginners guide using PH and zebra wood. They’re so difficult! Thanks bro

Great video, thanks John! Quick question - for large pours (ex. River tables), do you use the vacuum pot, or is that more for smaller pours and just use a deep pour epoxy for the large pours?

Awesome video, I love your tips, they definitely helped when I did a big clear river table. Maybe it’s just me but when you use the powder colors, do you have to worry about them settling to the bottom of the pour? I’ve had a few issues with that, how do you combat that?

One question: If you're using a liquid pigment dye and you need to seal the wood first, what product should you seal the wood with? AWESOME VIDEO AND LOVED THE BONUS TIPS! You're awesome!!!!!!!!!!!!!!!!!!!

@Azarathification

11 ай бұрын

Just a small amount of clear epoxy will do the trick, grab a scrap paint brush and brush it over any surface that's going to be meeting the main pour. Aside from preventing bleeding, it also helps prevent bubbles coming from the wood.

We have hello fresh in Australia and it’s awesome

Amazing videos, the only tip I haven't seen is should I put epoxy on the wood before i do a deep pour

4:17 Just learned that sausage is a capsule in geometric forms. Nice!

Pre-proportioned parts

Question: what choices are there for flexible vs. inflexible epoxy for projects? I'm working on smaller projects in which the wood flexes.

What moisture level do you want your slabs at before working them? Do you prefer natural drying or no?

Hey! Hope everything is fine. I was researching on the internet about epoxy related things and found u most helpful. Hope I'll learn a lot more things from you. I would have made you my "epoxy guru" if u were here in India😅. Anyways thanks a lot for putting your content. ❤️🇮🇳

I’d love to be able to pour epoxy first.

So I'm doing small pour projects, like taking natural wood pieces and filling the cracks and flat pieces of wood that have the burns in them and filling the shapes. Any tips? First couple have turned out nice but I've also sat with them for hours and blow torched the top of the epoxy every time I saw a bubble. Any self aerated epoxy brands you guys recommend?

You are A 'Epoxy God' Well your really really good and your tips have saved my well you know Wallet Thank you for the info and all the tips.

I would love your feedback. Epoxy resin over marquetry….is this a fools errand? Will the resin melt the wood glue while it cures? Will the resin cause the veneer of the wood to curl? Love to hear your thoughts

this is sick

I've got wood working class and am considering making an epoxy table

John you mentioned not to mill the wood too much beforehand, just clamp it down. Are you saying the epoxy will bond strongly enough to straighten the boards? How big of a cup could this tolerate? Thanks, love your channel

A tip for your next one. When you're filling in small voids and holes when finishing, use *thin* UV resin. It sets quickly under the sun or a UV torch. Then you can sand it easily and the voids are gone. It's a game changer, way better than CA glue.

@murc111

2 жыл бұрын

UV resin...can you recommend a good brand?

@ADHDbuilt

2 жыл бұрын

@@murc111 not really. I just get the eBay ones.

Great tips, but I have been hearing too many different things on how to prep the sides of your wood to create a good bond onto your resin. I hear the best is to use a wire wheel for scuffing and then use a bonding Agent buuuuttt, I don't know what kind of bonding agent. I saw a video of some black stuff they used if you're pouring black epoxy.

bonus bonus tip let john do all your pouring and learn from his mistakes

I’m trying to epoxy my river stone shower floor. What epoxy or sealer should I use that will give it that constant wet stone look?

I really want to try to do an epoxy project on a very small scale I want to take a couple ceiling fans and cut them in shape as fairy wings and for the inside make epoxy center but not sure how to form them yet but I'm going to do them one of these days my space is limited I'm a beginner and just a hobbyist

If pouring twice on a table bec I didn’t make enough how long do I have to wait in between and is it ok to use 2 different epoxies?

Bark question. If you wanted to leave the bark on an exterior edge of the table. Could you use something like a penetrating resin to sleep in between the water and the bark to create a good bond between the two.

Shrinkage/// I WAS IN THE POOL. sorry had to great video thanks for the info

Have you finished any of your river epoxy stuff with poly? I've used it for countertops and it works great against water, which the oil/wax finishes don't seem to do near as well.

When you say to 'Seal if using a liquid pigment' what do you use to seal it?

What type/brand of pressure pot do you use?

Where is a silicone tape I was grateful enough find some at work it's an inexpensive when you get it from the manufacturer when I get a chance I will post a link

Have you ever built a custom fireplace mantle?

What is the best technique or product to use to seal before the pour? I’m having issues with the epoxy bleeding.

@John_Malecki

2 жыл бұрын

Use something like total boat high performance

Can I do a pour and add gold leaf to pour?

Purposely cause the epoxy to go exothermal and crack and then fill it with epoxy

I would like to know how to clean a epoxy bucket after you pore

I’m doing a bottle cap card table.The pour area is 1/2 inch deep what kind of resin should I use?

Where do you get your epoxy resin for deep pour we are beginning to prepare for our first time and we want to get it right the first time

They make a blue silicone tape but it is kinda pricey fiberglast is a great supplier

John, where can a man pick up a copy of the Ron Swanson portrait in your shop?

Question for you guys/ the community at large. Would you recommend the tyvek tape or duct tape (for hvac duct)? I've heard that they both work about the same.

@jeffstebner4052

Жыл бұрын

Tyvek/masking. Even if they work similarly, duct tape is much thicker, and can cause some issues in overlap, leading to divots in a range of sizes, or lines. If you don't mind the extra finishing work, or it won't affect your intended finished product, go for it. Assuming they do indeed work similarly.

Perfect timing to find and subscribe to your channel. I got some walnut and I have a little bit of epoxy to play around with. Just curious, did you or do you know Matt Lentz ? I was at his wedding and sat next to Jake Long. Matt married my wife's cousin for a little while anyway.

I recently poured an epoxy project on, in and around a oak wood slab. I filled the knots and cracks with a deep pour epoxy. All that turned out great. Then I decided to pour over the entire slab for a shiny finish. The problem I ran into was near the edges of the slab, where the sap wood was, the epoxy seemed to just absorb into the sap wood. And the rest of the slab is shiny like I wanted. What do I do now? And is there a sealer that I should have put over the entire slab before I poured the top?

Buenos días Brasil 🇧🇷🇧🇷🇧🇷🇧🇷👍👍

How dry is dry wood?

i use $4 dollar packing tape and it works amazingly never had epoxy stick to it, you dont need tyvek tape or tuct tape they are just tested

Great tips thanks, I’m getting ready to get my feet wet.

Thursday 10 January. I just subscribed. I was wondering if you are my military brother? I’m brand new to this and trying my first project. I have really enjoyed and learned a lot from your videos. I am a disabled veteran with 20 years in the army. Would love to talk to you. Thank you.

Thank you John, I love the style of the video of your channel! Two questions: You are the first video that I saw which use the vacuum chamber to degas resin versus a pressure pot. Is vacuum chamber remove all the bubbles? For the pump of the vacuum chamber , is a 1/4 hp strong enough for a 5 gallon vacuum chamber. Thanks in advance!

@cayde7469

2 жыл бұрын

Hi Ronald, if you use a pressure pot the resin has to stay in the pot under pressure until it is fully cured. The reason being is a pressure pot doesn’t actually remove the bubbles from the resin it just compresses them so small that you can’t see them in the final project. So a pressure pot is only viable for smaller objects that can fit into the pot. On the other hand a vacuum chamber actually removes all the bubbles from the resin, but you have to be careful when you transfer it from the vacuum chamber to the mold so as not to introduce more bubbles into the final piece. As for the size of pump, you will want to make sure you get one that is able to reach 25-29 inches of Mercury to make sure you have the strongest vacuum possible. A 1/3HP pump is suitable for a .5-1 cubic foot vacuum chamber which is roughly 5-10 gallons. So a 1/4 HP pump should work fine for a 5 gallon chamber. Hope this helped, sorry it is so long.👍

@John_Malecki

2 жыл бұрын

Honestly ronald i dont know about the HP question, we're still learning to use the pot correctly. I will say tho, its been a great tool. Also, i think the vaccuum chamber and pressure pot do the same thing ? No

@ronalddenault1246

2 жыл бұрын

@@cayde7469 Dear KD I would like to thank you for this valuable info. This is the missing link that I need about the careful transfer of the resin to the final peace. I did not want to invest in two big pots in my shop (pressure and vaccuum). John's video and your excellent comment provide me the breakthrough that need to go forward. Do you have a KZread channel?

Hello, I just watched this video and it was very helpful. May I ask you a QUESTION, please? I have a slab of white oak about 2" thick I milled myself... it is a little warped... I used it as the bottom of a rustic "cowboy" bookcase (18" x 42")... but it is uneven and doesn't sit flat on the floor.... I was thinking of using epoxy to level the bottom. I would screw a dead-flat board (e.g. MDF) onto the bottom of the bookcase board which is warped and uneven (~ 3/4" max)... after first shimming the bookcase level..... then seal up the edges of where the MDF and my warped board meet... leaving open a gap where the board is warped..... then pour epoxy down the gap, filling up the void between the MDF and my warped board... then when dry, remove the MDF board on the bottom and my bookcase should then sit level on the perfectly level epoxy bottom. Does this sound do-able? ... and if so what type epoxy would you recommend (e.g. it must be able to hole 200 or 300 lbs of weight. THANK YOU!

Could you use something like pentacryl on the wood and bark before pouring epoxy? would that work? curious...

@John_Malecki

2 жыл бұрын

Have never heard of this product, so i cant really speak to if it'll work

Can you post a link to the previous video? The stupid KZread app went somewhere else and I can’t find it again.

John. Can you put a link to your vacuum pump. Thanks

@John_Malecki

2 жыл бұрын

it is in the description !

Can you pour two layers of epoxy on top of each other? I am thinking about using epoxy with river rock as a floor

@zakkhess7919

2 жыл бұрын

Yes - If you're going to pour a base coat of epoxy and follow it up with rocks before covering with a clear, ensure you scuff the base coat with sandpaper so that you get a good mechanical bond with the clear you're going to pour.

@JohnMalecki I'm new to epoxy but work with other mediums...I saw you whipping the epoxy up...is that because it has to be blended quickly? If i stirred slower I would get less bubbles...but would it be setting as I stir? I noticed your guy pouring from a height which would definitely cause bubbles. Is that to help get it into all the nooks and crannies? Would it be a good idea to use a bristle brush on the edges and then pour? I know if I pour low and slow with pop or beer you get very little froth...would the same technique work with epoxy? I know when I pour warm chocolate into a mold I have to rapidly tap it to make the bubbles rise. Can this technique work with epoxy? I wouldn't lift the project but use a vibration massager like the one used on backs.

You are fcken great!

If a person was going to pour a dining room table with bread board ends you see any issue with that?

Can it get to cold? I was gonna dip my toe in resin over the winter and my shop will be cold cold like freezing cold. Semper Fi.

Sorry I am a little confused. You use the pressure vacuum before you pour it in the mold???

@John_Malecki

Жыл бұрын

Yes, it removed bubbles.

Idea for calculating volume. Fill the river with packing peanuts, then measure the volume of the nuts. No math to accidentally screw up. Just an idea, never actually put it to the test.

@John_Malecki

2 жыл бұрын

Maybe, if you have time for all those nuts haha

Tip about tape, don't tape around and to the other side on the edges, if the epoxy finds that spot it will go under it and passed to the other side.

Great tips. Thank you. Great channel. Music, repeating over and over, at same volume as your voice, not so much. Love the presentation and patter.

Wax your melamine instead of tape… works a treat and application is way easier

@John_Malecki

2 жыл бұрын

no melting issues ? I'll give it a try

A las español estu producto estoy inyeresado

Lower the music or ditch it. Distracts your info. Otherwise great vid 👍🏼

The thumbnail’s graphic trolled me. I thought you were going to talk about the pigment’s you used. Where do I go for a solid color? I have some pigments that show slight swirls and stuff…but no solid colors like paint gives….is there such a thing?

Spray mold release on melamine works fine. Melamine alone? No.

Thanks for taking the time to share your videos. I've watched both of your "tips" videos, and many of your other videos, and I'm ready to do my first pour for a cookie slab end table. I've bit the bullet and ordered the EcoPoxy FlowCast Epoxy for the project. Because it's freezing winter where I am, I was planning to do the pour in our basement. Is there an odor that ocurs while the epoxy cures that I should be concerned about? I don't want to smell up the whole house. Thanks for your assistance!!!