Thank you so much for taking the time to show one’s like myself how I can use the deco mesh. I have never made a wreath yet, but I am going to give it a try. Thank you again!!

This as a very good video! Your directions were easily understood . Thank you for sharing!

I find the ruffle method tends to allow for more fraying. Also, I use 20 inches for the cruffle method and curl no more than 3 times. It makes for a nice full look & saves 5 inches of mesh per cruffle. I also find it easier to allow the natural curl of the mesh to form the curl. Much easier than flattening and rolling. These are just things I have found helpful. Everyone has there own groove.😉

@JamiesCreations

Жыл бұрын

I do use my wood burning tool to cut mesh to help reduce fraying as long as the mesh doesn't have burlap or a fabric mesh. Yes everyone has a different way of doing things so there really is no wrong way, as long as you're enjoying the process. I like learning how others make their wreaths I always learn something new! Thank you! ❤️

@bellamoments5908

Жыл бұрын

​@@JamiesCreations I agree no wrong or right. I use my soldering tool😂 for my mesh

@bellamoments5908

Жыл бұрын

@Brenda Giles I use my soldering tool. I never have a problem with the ruffle meth. I think it depends on the mesh.

@kimberlypantalena7137

4 ай бұрын

Do you use the 6 inch deco mesh from Dollar Tree?

Thank you for the awesome tutorial.

Thank you for sharing, I have enjoyed learning new ways to make deco mesh wreaths. .

Thank you!! I am literally just learning and this is an amazing video!!!

Thank you so much. I appreciate you for taking the time to make this video

@JamiesCreations

2 жыл бұрын

You're welcome and thank you for watching! ❤️

This was incredibly helpful, thank you ever so much 💓

@JamiesCreations

Жыл бұрын

Glad I could help! Thank you for watching! ❤️

Beautiful ! Thank you so much for sharing. 😍

@JamiesCreations

Жыл бұрын

Thanks for watching! ❤️

Your video was very clear and easy to understand. I like that you showed examples side by side of the different kinds you taught us at the end. It was like taking a mini wreath course. 😊Thank you!

@JamiesCreations

Жыл бұрын

Thank you Susan! ❤️

I would love to see ribbon added to your mesh too

I love that you have provided a nice clear and slow demonstration and description to help beginners ❤ Well done 👍

@JamiesCreations

9 ай бұрын

Thank you! ❤️

Thank you very helpful.

Excellent narration of each different type of method! 😊

@JamiesCreations

10 ай бұрын

Thank you!

Thank you so much on how to make the difference mesh for wreaths. This is awesome !!

@JamiesCreations

2 жыл бұрын

Thank you for watching! ♥️

@donnamcfeely4953

2 жыл бұрын

@@JamiesCreations you are very welcome ❤️

Very informative and helpful, loved your video 😃

@JamiesCreations

2 жыл бұрын

Thank you for watching! ❤️

Thank you for explaining as you go.

@JamiesCreations

Жыл бұрын

You are welcome! Thank you for watching! ❤️

Thanks for sharing your amazing talents.

@JamiesCreations

Жыл бұрын

Thank you Kathy! ❤️

Thank you so very much for taking yr time to show me how u do these

@JamiesCreations

2 жыл бұрын

Thank you! ♥️

Thank you , I am newby so this is very helpful! Thanks for sharing..

@JamiesCreations

2 жыл бұрын

Thank you for watching! ❤️

Thanks for taking the time to help us out here make a wreath

@JamiesCreations

Жыл бұрын

Happy I could help, thanks for watching! ❤️

Wow, thank you for this.

@JamiesCreations

Жыл бұрын

Glad it was helpful! Thank you for watching! ❤️

I’m loving it

@JamiesCreations

Жыл бұрын

Thanks for watching! ❤️

Thank you so much for sharing your techniques. I'm new to wreath making and found this video to be clear and easy to follow along. Again thank you so much! ❤

@JamiesCreations

8 ай бұрын

You are so welcome!

@LinLobeck-qx7qi

7 ай бұрын

I am fairly new to wreath making & ur video is simpler 2 follow. Thanks

@JamiesCreations

7 ай бұрын

@@LinLobeck-qx7qi thank you for watching!

Love. It

I’m new to deco mesh so thank youuuuu 🥰

@JamiesCreations

2 жыл бұрын

You're welcome and thanks for watching! ❤️

Thank you do much We all appreciate it

@JamiesCreations

2 жыл бұрын

Thank you for watching! ♥️

I really enjoyed this I learned alot

@JamiesCreations

Жыл бұрын

Glad it was helpful! Thank you for watching! ❤️

Very helpful - thank you

@JamiesCreations

Жыл бұрын

Glad it was helpful! Thanks for watching!❤️

Thank you❤❤❤❤

Awesome!

@JamiesCreations

Жыл бұрын

Thank you! ❤️

Thank you for all your help on showing how to do the different methods. I have the use of one hand so I will certainly try a few of the methods. I can do the curl method only at this point. If you have any suggestions for my one hand, please share.

@JamiesCreations

2 жыл бұрын

I'm glad I could help! I think the ruffle method would be easy to do with one hand as long as you have a way to anchor/hold one end while you ruffle. Hope that helps. Thanks for watching! ❤️

I like that one

❤❤❤❤❤beautiful

How do you get the puff back on a packed Christmas wreath. Mine are flat now. :/ Thank you for your help.

This is an awesome video. Ian new so I have to watch this one more than once. What I don’t know what to do is how many goes in each section approximately using a 14 inch wreath

@JamiesCreations

2 жыл бұрын

It depends on what method you use. Typically each section will have 3 ruffles, cruffles or poofs one per pipe cleaner. For the curl I usually use 2 curls per pipe cleaner. For bubble method I usually have about 5 bubbles in each section. I hope this helps. 😀

Thank you so much... I bought a bunch of decorative mesh and I had no clue what to do with it!!! Lol...

@JamiesCreations

2 жыл бұрын

Thank you for watching! ♥️

So helpful

@JamiesCreations

25 күн бұрын

Thank you!

Can you make bubble wreath with a ten inch mesh

What method uses the least amount of mesh?

What do you do with the pipe cleaners to hide them?

@JamiesCreations

2 жыл бұрын

It just depends on what you want to do. If you plan on adding anything like ribbon to them then I would wait and then when you are done just twist the pipe cleaners a few times and snip off the ends. If you are not going to put anything else in them then go ahead and give them a few twists and snip the ends off. I hope this helps, let me know if you have any other questions I'm more than happy to help if I can. Thanks for watching Leslie! ❤️

It would have been nice to see the finished wreaths. Otherwise very informative! Thanks!

For for the bubble wreath can you use 10 in deco mesh instead of the 21 in

@JamiesCreations

9 ай бұрын

You can but you will want to make your bubbles bigger and it may not be as full so it may require using more mesh.

I have a round wreath that has been filled in with chicken wire. I'm trying to find one like I have to understand where to put the 10 inch decor mess. Is there anyway that you can show me how to do this. There is a hole in the center part of the wreath. I've combed thru the different sites and I cannot find anyone who is doing this

@JamiesCreations

Жыл бұрын

I'm not sure I have ever seen a wreath filled with chicken wire, where did you find it if I may ask?

Have you ever tried to incorporate more than one method on one wreath? I was curious what a wreath would look like if there was more than one method

@JamiesCreations

11 ай бұрын

Yes I have a recent tutorial on my channel of a Patriotic wreath I made using ruffles and curls if you would like to check it out.

What’s the difference between the bubble and the pouf method??

@JAKA517

Жыл бұрын

… the placement of the pipe cleaner seems to be the only difference… what am I missing??

@JamiesCreations

Жыл бұрын

The difference is that with the bubble method you are putting at least 5 poufs in one section of the wreath and pushing the poufs together so the end result will look sort of like a bunt cake when the wreath is complete. With the pouf method you are only adding 3 poufs per section of the wreath ring and you are not pushing the poufs together. I hope that helps. Thanks for watching.

New to wreath making. Need all the help I can get?

Do you ever use the 6 inch deco mesh?

@JamiesCreations

4 ай бұрын

Not usually. I mostly use 10 inch.

How many rolls does it take to make each wreath ?

@JamiesCreations

10 ай бұрын

It really depends on what method you use and how big your wreath frame is but for me I tend to use the ruffle method more than the others and it generally takes 1 roll of 10"x10 yards cutting 18 pieces to 20" long and using a dollar tree 14" wreath frame. I hope that helps. Thanks for watching!

For roll look how many rolls ?