I had my Jeep out yesterday with my TRX4 Blazer. My wife and adult daughters love these. Wife wanted her own Blazer and Scaler. Its great when a hobby spreads through the family!

Mine came today. I went to my local hobby shop to get a battery and nobody there had seen one so I brought it in so they could see what would fit. Everyone was impressed with the detail and packaging. The shocks were actually very smooth, maybe the factory watches your reviews!

Another great video! Thank you for all the great videos in 2020👍👍

O, yeah, what a great performance improvement is your shock update. I just filled them with 25 oil and removed the limiters and it is driving insane. Before when I drove full speed on the field the driver just bumped out and now he gets a smooth ride, incredible. I also found out if you fill your shocks too much they get very stiff so leave out the last 2mm and you get a 100% rebounce and I turned the spring adjustment all the way up. I like your unbiased video's, keep them coming!

@JATrainsRC

Жыл бұрын

Do you know where the limiter is? I can’t figure it out.

Changed the shock oil, what a difference!! Thanks!

Great rig, I put some Axial shocks that I had in the parts bin, massive improvement, just bought another to customise.

Because of your original review on this vehicle, I bought one! It' just came in the mail a couple hours ago. Thank you so much for the review! A couple things I noticed with mine is that the shocks are great just as it came in the box- RocHobby must have taken your advice and put in the correct shock oil. Also, my Jeep came factory installed with an XT60 battery plug, not a Deans. That's fine by me as I prefer the XT60's and was going to change it out. Thank you again for your excellent videos!

Man you have the best rc videos. Thank you for awesome content!

Thank you and Happy New Year!

I admit this thing is cool. My list of trucks keeps getting bigger for my channel/collection haha. Awesome work man. 👍👍😎⭐⭐⭐⭐⭐⭐

nice review fran always enjoy them in the morning

Hi Your reviews are in my view the best of the best....Thank you

Very excited about getting mine soon ☺

Thanks for youre nice reviews👍 Ive had mine for 2 years now, servo, receiver and controller is still stock. I only had some minor breakdowns and some rusty bearings. And it have way more miles in it than any other og my trucks. Im very impressed with this vehicle.

Thanks for sharing; And apart from the shocks, they seem like simple upgrades too.

I have been following your reviews on the MB for a while and just ordered one through Amazon after watching. I haven't had a chance to run my TRX4 from Christmas and have have an MB Scaler on the way.

Great presentation and content, thank you.

Hi Mr RC Review, thank you for this tips that have to be added at all the other ton you give us. Happy new yer and best wishes. Ciao Nanni

Excellent video. Great information.

really a good car for the money I'm impressed with FMS/RocHobby got mine last week look forward to doing a couple of these mods, and I agree 100% about having a driver every one of my trail trucks/ crawlers has a driver. 🙏😎☮️✝️

Amazing articulation with the shock oil swap! Very impressed... thank you for the great tips my friend. Cheers from Ireland! ;)

@RCReviewChannel

3 жыл бұрын

Thank you! Cheers! Remove the travel limiter too.

@stevesullivan9752

3 жыл бұрын

@@RCReviewChannel Will do! Love my little jeep! ;)

Rochobby just started to make RC Cars. Looking forward for their RC Cars in 2021/2022 - they will be even better.

Nice video, thinking of getting one for myself.

@thommothommo1520

3 жыл бұрын

I Like mine so much, I ordered another one.

Is that your laundry being run in the background? lol Love your reviews and the sense of humor you add.

The ESC is not the reason it's jumpy in reverse. It's the radio which is not sensitive enough. Put in a FlySky receiver, add some expo to the throttle channel and you'll see.

This Dude is awesome !

Just got one. Its awesome

Nice bro✊🏽🤓 Add Navajo code talker Gi joe to it man✊🏽✊🏽 Happy new year man

Thanks for these great tips. I just finished changing the shock oil and I painted the engine bay to make it my own look. Looks great now and the shocks are like they should have been all along....

Good review...thanks....BTW, what battery are you using? Ordered my Jeep Fri.

I miss leavesprings so bad! "Ghostdrivers in the sky!" Ha ha!

Get a driver , Amen brother ! 👍 I feel the same way.

Nice one sir. U can also add a slider made by axial so u cant scratch/damage ur body😊

Just push the window frame down a little hard w wipers up clicks right in no need for magnet.😁

I put 40 oil in mine and removed rear limiters. It's amazing!

@oneanddone7992

3 жыл бұрын

Thank you for confirming that stock shocks with 40w are the right thing to do. And I assume you mean you filled stock shocks with new oil, not after market...

Thanks for the shock tip. They are still sticky in 2024 😅

@RCReviewChannel

4 ай бұрын

Good to know. They're prolly all old stock

I am looking forward for great videos from RC Review in 2021. Thank you

Wish I had seen this video before I ordered new shocks. Well, I went ahead and ordered some shock oil and slime to try out your suggestion. I have the real thing in my garage waiting for a bit warmer weather to finish putting it back together so for now, the 1/6 scaler will have to do. I ordered the top and the trailer and that should be here on the 4th! I think I will try removing the cushion as you suggested as my driver does seem a bit tall. To be honest, I'm only 5' 10" and in the real thing, I'm a bit too tall. So a scale 6 foot or more guy is really too tall. :) Another thing I want to do is to put some tail lights on it. Also fix the Black Out Driving light that sets on the fender. This should never be on when the headlights are on. So I need a switch to turn off the headlights and on the BO light. Great video. Thanks!

Thanks for your review and tips for upgrades. I just got my MB scaler and can you please tell me which servo horn you used and where can I get one? Thanks!

Thanks for the video. As for changing the pinion the explosion views show how to get into the gearbox. You'll need to window one screw hole since the motor with have to change position with the smaller pinion. Biggest question is I don't know what the pitch or module the gearing is to match a new pinion. If you find that out, please post it.

Second place. I got it today and now I know way. The drive train is so smooth compared to many of expensive RC crawlers. $300 bucks? They could sell this thing double the price and no one would complaint.

Do a Scx24 jeep vs b17 Betty review

Could you do a video on water proofing all the electrics

Awesome video and tips, I just received mine, and right out of the box I noticed that the steering wheel isn’t turning along with the front wheels?? I looked underneath and it appears everything is attached, could it be a bad servo? Otherwise it rides great, I’m new to the hobby so any suggestions would be great, thanks.

I've just ordered one! Could you tell me how many teeth the steering servo horn has?

great ideas, I did the shocks and the flex it's insane now. the only thing I have notice its the front steering doesn't allow the full flex on the driver side as the steering bar touch the front bumper, can I remove the whole bumper ? the magnet to hold the body ( brilliant idea)

Could you make a detailed video to show how you proceed step by step to change the oil of these schocks please? Thank's

Love your content. So are there tires that will fit the stock wheels? Or wheel weights?

@mcplutt

2 жыл бұрын

Buy 1.9 steel wheels.

I've got 2 of them and I made Grampa's Jeep (a CJ2a) out of one

Hello ! My wife doesn't hank you. ;) I look this video a lot of time and finally I buy one. Very happy with it. My bank account nont... lol Thank you for your videos really nice and well detailled each time. ;)

@RCReviewChannel

2 жыл бұрын

Great to hear! Welcome to the addiction

Where can I get that magnet? Thanks for the video.

Absolutely love mine. I replaced the shocks and servo the day I got it. Been adding accessories like crazy for details. Amazing, life-like rig.

@mospeed3224

3 жыл бұрын

Do you know what spline the stock servo horn is? The plastic one worries me

@markfehrenbach4204

3 жыл бұрын

@@mospeed3224 25T servo horn. I actually replaced the servo with a higher torque one, but the stock servo is 25T

Swap the TX an RX as well, for smoother control. TRX-4 shocks fits perfect.

@michaelebersole6989

3 жыл бұрын

I just ordered one without the tx and rx. What would you recommend without breaking the bank? I was thinking about using my DX6 airplane remote but now I think I want to get a tx with a wheel?

@chrisgaalen

3 жыл бұрын

@@michaelebersole6989 Every TX you like.

I wish I had seen your video before I ordered a set of pull-off Traxxas TRX-4 shocks: it probably would have saved me $60.That being said, I put a set of the Traxxas shocks on my Axial SCX10 II 1955 Ford F100 RTR on your recommendation, and I really like them. I replaced the plastic servo horn with an extra metal one I had laying around; I have a 1/6 scale WWII soldier on the way for a driver; and I have a FS-B6 receiver on order so I can use my FlySky GT5 transmitter with the Willys. I'm seriously thinking about upgrading the motor and ESC to the Hobbywing Fusion 1800kv system sometime in the future.

@jamesmorrell2901

3 жыл бұрын

I just finished installing the new FS-BS6 receiver to go with my GT5 radio. With the the GT5 radio the throttle is much smoother - slow speed crawling is much improved; there are no more issues with reverse; and there is much better throttle modulation throughout the entire range. And I was able to tweak the steering end points. This is the best $23 upgrade I could have made.

@jamesmorrell2901

3 жыл бұрын

The Traxxas shocks came in yesterday's mail, and I installed them. What a difference! They are worth every penny.

I would love to get one of those and mod the crap out of it.

My 1/6 MB crawler front wheels servo barely turns 10 degrees. The servo horn appears to be fixed at a slant. How can I get max turning radius? Need you advise, Francis. Everything else with this rig is awesome

would this body fit on the rc4wd chassis ?

i found that the gear ratio is not 48p it is the TAMIYA gearing, I'm currently running a 12t tamiya gear on a hobbywing fusion on 3s and its everything i could ask for!

@albertkelly7129

11 ай бұрын

great info man. so the 0.4 pitch correct?

What size servo horn works best?

order one , many thanks¡¡¡¡¡¡

Which one would you choose

What is a good battery help

Anybody changed the grease in the gearbox? The grease in there is almost like syrup. It had found its way into the bearings as well. They were almost locked up. Had to clean them in alcohol and reapply bearingoil. After removing the grease and replacing it with a high quality one, it runs much better. Motor temperatures are lower too.

Any driveline upgrades

Does anyone know if these can be converted to leaf springs ?

I got the 1/12 problem I got is the axel is loose and makes my drive shaft come out what is the fix

What about rear driveline up grades

Is the chassis like a scx10

Where do we find the full figure action figures

is that rock pile in cupertino, and what is the address?

Anyone have an Amazon link for a proper battery and charger for this vehicle?

Somebody put a hobbywing fusion in this FMS?? Tks 👍

The rear bumper can be adjusted two or three notches in to get better departure angle :) I did it to mine . Read more

What is the recommended battery for this? I cannot find information on the best battery to use. Thanks.

@Pezzapoo

3 жыл бұрын

You can use up to 3s, I fit a 5000mah in it

I love the scale look of this rig, but I just don't understand why they made it a 4 link. That ruins the scaleness. The gmade willys has leaf springs but doesnt look near as scale. Is there an in between?

@billsummerhill5550

Жыл бұрын

Roc hobby makes the leaf spring kit for the mb and the mashigan yj

Hello! Why did you use my photo at 8:11 without my premission?

@seattlebasher8021

3 жыл бұрын

Booohoooo

Where can I find 25 weight shock oil without buying a huge quantity?

@mcplutt

2 жыл бұрын

In the rc hobby store.

The body rod will store under the hood.

28Jan22, the trailer is now about $140 (usd)! It's cool but not THAT cool, lol.

Hi

Get rid of that set up use scx2 done. Then you can mess w pinion.

A scale US military vehicle the engine bay should be the same color as the body. In this case it should e OD green. It’s a scale vehicle you should learn to drive it with it’s short comings.

Hehe. You love this thing.

What’s with the background noise every video has background noise

It’s a scam

@mcplutt

2 жыл бұрын

ok

Would definitely put the leaf spring kit on it to make it more scale to the real ones