Thanks happy I didn't have to buy a manual for a torque sequence. Only other thing I found online was wrong to this 🤘 hope you get a winning lottery ticket this week

Ay bro thanks. Told me all I needed to know.

Thank you for the video.

very good video thanks

perfect video to the point Thank You

The exhaust manifold bolt broke off and won’t come out I order a new head do I need to do anything with timing chains or is it just a remove and replace procedure ?

I have chrysler 300 5.7. Is there a way to take the cylinder head bolts out with out snapping the bolts

I have the manual for my CHARGER RT 07 but dont know where i find the various torque specs. Any idea ?

Thank you for being my hemi head jesus

@sharpcarco

3 жыл бұрын

🤔😂😂😂😂😂🤷🏻‍♂️😎

@deadmanowar7404

3 жыл бұрын

@@sharpcarco you saved my ass. Im workin on a 06 jeep commander, with a 5.7 hemi

Hi great video. Do you have a video of the valves, rocker and rod installation. I have read this can be a problematic install and it would be nice to see it before doing it myself

@sharpcarco

5 жыл бұрын

I don’t right now but I’m building one of the motors here in the next week or two and if I do the actual assembly again (I’m thinking about taking it to the machine shop) I will make one I need some other work done on this new engine and I’m thinking about just letting them do it all

@ryanv7195

5 жыл бұрын

@@sharpcarco thanks for the reply. I have a 2011 ram 1500 with bad lifters that I'm going to do a cam lifter swap. Just trying to get all the info I can before. Hopefully you do a video. I'm subscribing. Great job

@guillianephillips5367

5 жыл бұрын

Great job I really needed to know this thanks a lot

Your right if I can do it anyone can do it… lol Thanks for the video best sequence video so far. Another question do you have to use a torque wrench on The lifters, intake, timing cover, oil pump, pretty much everything that involves a cam and lifters project. Would a children’s book help out with specs? Or what book do you recommend?…. Childrens…LMAO DAMN AUTO CORRECT.. Chiltons book?

@sharpcarco

2 жыл бұрын

Oh my god that had me rolling….. children’s book I thought you were making fun of me When I first read it You should always use a torque wrench for everything there is very few things I do not use a torque wrench for. I think it’s important to torque covers down but if I wasn’t going to use a torque wrench on something it would probably be something that does not move. So as far as the cam and lifters go I would definitely use a torque wrench. Welcome to the channel Rey thanks for the laugh brother and have a good evening we’re happy to have You here

@rayray9777

2 жыл бұрын

@@sharpcarco Thank You! For The welcome. What is your procedure on tightening the camshaft bolt without the sprocket turning?

@sharpcarco

2 жыл бұрын

Well anytime you are sequencing bolts think about it like a pinwheel, start from the center and move your way outward.

So apparently on passenger side head I torqued it to 40 then 90 degrees turn because the page was missing where it says torque to 25 first. Driver side I did properly 25, 40 then 90 degrees. What are the chances that the passenger side head gasket will cause a problem. Or I should be ok!!!!!!!!!!. Thanks

@sharpcarco

4 жыл бұрын

hey John ,That’s not going to be an issue don’t worry about it , that’s my opinion.

@JohnDoe-ig1yw

4 жыл бұрын

The Clay Way sometime a second opinion puts your mind at ease. Thanks.

@sharpcarco

4 жыл бұрын

Yeah I figured that

Do u have to set motor top dead center when removing the head for head gasket replacement ?

@sharpcarco

2 жыл бұрын

No but you Should always do it before you put it back together

What kind of digital torque wrench you using. I need one of those

@sharpcarco

3 ай бұрын

Matco

Thank you I really need to learn what's ram's problem engine part of code warning on left cylinders big problem 5 and 7.. 5's compressior is lost by 30 by 120- should had 150 as had 1 and 3 on 150 on tester compessior. real good. Nbr 7 real badly poor no 00 tester compressior. I am afaird of totals cost more money other problem.

Do you use all new bolts or can you re-use bolts? Thanks

@sharpcarco

5 жыл бұрын

I often reuse my bolts but you are not supposed to they are torque to yield you are supposed to get new ones. I do this personally to contact my own personal test on my vehicles because I have the ability to just take them apart and fix them. But the proper recommendation is that you get new ones

@MrSleepProductionsInc

5 жыл бұрын

The Clay Way thanks for the fast reply! 👍🏽

you just confused me,,,,is it 25 40 90 lbs or 25 40lbs then 90 degrees? wish you would have showed what you did

On the head bolts did you use the red threadlocker? I noticed red at the end of the bolts and want to make sure that if it is either teflon tape or threadlocker or ? I am using new bolts but did not notice any red coloring at the end of them.

@sharpcarco

4 жыл бұрын

If the new head bolts that you’re using had Loctite on them or if you were reusing Head bolts with Loctite on them you use Loctite. . If the head bolts you took out had Loctite you use Loctite if not you don’t I hope that helps you out brother have a great day just make sure you follow the sequence properly most head bolts do not use Loctite

Hi are all bolt same 90l lbs for hemi 5,7 durango 2011

@sharpcarco

5 жыл бұрын

It should be the same procedure but I recommend that you look up the factory original procedure. Because sometimes it changes from year to year

The intro bro😂

@sharpcarco

2 жыл бұрын

Sorry man it seemed like a good thing at the time……… Thanks for letting me know I’ll have Cameron fix it though we’re trying to get rid of a long long intros

@alergl9842

2 жыл бұрын

@@sharpcarco no it’s not that bro I like it it’s suspenseful!🙏

@sharpcarco

2 жыл бұрын

Well you’re probably one of the few but thank you for clarifying. I liked it too when I did it. But I got more negative responses than positive ones.

Does the heads matter which side I place it on the cylinder

@sharpcarco

2 жыл бұрын

No not really because they won’t fit on but one way.

Do you have to torque rocker arms ?

@sharpcarco

5 жыл бұрын

Yes it is always good practice to torque down any bolt two specifications, . Unfortunately I do not have the specifications for that I would recommend just looking it up on Google. Unfortunately under any circumstance I could not recommend someone to tighten down the bolts without looking up the torque specifications. As far as the engine is concerned on the inside of the engine we torque everything down to the proper specifications. Because we don’t want to ever have to take it apart or have it fail prematurely

Youre not supose to cross on spec sheet. And its 25 to 40 to 90°

Hey why did u say 50 ft lbs Haynes calls for 40 then a 90 angle I’m in the middle of one an can’t get it to seal right I hate the 3 layered head gasket bs man bought a new engine wish I would have just done the head gasket a but I dropped my valve seats an it cracked a piston so I bought a new reman an low and behold it had a leaking head gasket so I had to replace it an they will only pay up to 800 for a shop to do it an I have to pay the rest another 1500 an I feel like I got robbed any advice is appreciated

@trenchbaby5717

3 жыл бұрын

How did your valve seat drop

@justin_5.

8 ай бұрын

Sorry did not notice that I had a comment I dropped a valve which punctured the piston the dang thing never overheated no signs no nothing just went into the bank one afternoon running fine shut it off come back out would not start. I replaced the radiator found out later I forgot to tighten the radiator support bar well it just blew months later after the radiator replacement. It got a lot worse after got a surefire motor to replace the old one. well they never put in the installation instructions that you have to use the old pilot bearing out of the old motor so during replacement the new motor destroyed the teeth for the transmission pump. was not very happy with the company they ended up giving me my money back because I was going to sue them for negligence you expect people to automatically assume that you have to use something that is what a installation manual is supposed to be for. @@trenchbaby5717

And this also applies to a charger right?

@sharpcarco

3 күн бұрын

Of course, if it’s a 5.7

1st mistake I noticed... You didnt point out the front of block location. 2nd at the angle your camera is... Couldnt see crap

@sharpcarco

Жыл бұрын

OK I’m not even…. Oh Omg lol well, I hope you feel good anyways.

Good explanation up untill you said after torque 15 mm bolts go 90 degrees more. You really should have explained the 90 degrees part,, so i give you a failing grade for explaining, sorry, maybe do a follow on up about what 90 degrees one time means?

@sharpcarco

4 ай бұрын

I don’t normally respond to people who insult me then ask me a question…. And when people watch videos and they wonder why the guy doesn’t say anything about the torque specs it’s people like you that are the reason… if you don’t understand what you’re doing and why you’re doing it you probably should not be doing it. What do you think? 90° means ? How do I even answer that question?

@number5borrego916

3 ай бұрын

He definitely has a point. 90 degrees was taught to u in high school. Its VERY simple. It's not his fault you don't know what that means. Respectfully.

where the 90 drgree

Manuals say 40 lbs and 90 degrees....you say 90 lbs ?

@sharpcarco

5 жыл бұрын

That’s what my manual told me so that’s what I did .

@justin_5.

3 жыл бұрын

So clays way so that’s what my manual says to 40 then a 90• so u went 25 then 50 then a 90• ima try that I can’t get these dang things to seal lol pain in the butt loved the video

Is not helpful because you need to explain better

@sharpcarco

5 жыл бұрын

Now that’s not something I hear very often. Generally over explain things